SPECIAL REPAIR TO BLDG NO E-356 AND PROVN OF MED STORES CONSISTING OF 6 ROOMS (SIZE 17.5 SQM EACH) AT FD HOSPITAL UNDER AGE B/R-II OF GE GOLCONDA

Amount

Demolition of cement concrete reinforced Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/Dense soil complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified.

M&L for Reinforced cement concrete type B1 1:2:4 (20mm graded agg) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as spfd and directed.

M&L for Reinforced cement concrete type B1 1:2:4 (20mm graded agg) as in Columns, pillars, piers,posts and struts etc complete all as spd and directed.

M&L for Reinforced cement concrete type B1 1:2:4 (20mm graded agg) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as spd and directed.

M&L for Reinforced cement concrete type B1 1:2:4 (20mm graded agg) as in as in beams, cantilevers, bressummers, lintels over 1.5m span Complete all as specified.

M&L for Reinforced cement concrete type B1 1:2:4 (20mm graded agg) as in Chajjas etc complete all as spd and directed.

Formwork to sides of concrete foundations, rough finished surfaces of flat concrete, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,etc complete all as spfd and directed.

Formwork to,rough finished surfaces of concrete,square, rectangular or polygonal, sides of pillars, posts, struts, piers, columns and stanchions,etc complete all as spfd and directed.

Formwork to,rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc complete all as spfd and directed.

Formwork to ,rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as spfd and directed.

Formwork to,rough finished surfaces of flat concrete, chullah hoods, chajjas,troughs and similar items including edges,etc complete all as spfd and directed.

Formwork to,rough finished surfaces of concrete, edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,etc complete all as spfd and directed.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length, bent to shape required including bending ,cranking and hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified.

All as per item no 23 above but 6 to 8mm dia

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups cut to length , bent to shape required including bending, cranking , and hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified.

M&L for 25 mm thick Damp proof course in cement concrete 1:2:4 Type B-0 (Using 12.5mm crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Demolition of Brick works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed

M & L brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius all as specified.

Taking down cement plaster on brick walls incl racking out joints, hacking key & scrubbing down with water.

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed

M&L Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1 : 6 and finished even and smooth without using extra cement complete all as specified and directed

M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and directed

M&L for 20 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed

M&L Vitrified Ceramic tiles 10 mm thick (square/rectangular) Polished dark shade/double charged/ ultracharged, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spfd and directed.

M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed.

S&F Gl frame work size of grid 605x605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M & L for prepartion of newly/Old surface of ceiling and applying two coat OBD on ceiling comlpete all as specified and directed

M & L for preparing newly plaster surface of wall and applying 2 mm thick POP putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats 1st quality acrylic distemper ober a coat of wall primer on prepared surfaces of internal walls complete all as specified and directed

M & L for complete removal of existing treatment of wall and applying 2 mm thick POP putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats 1st quality acrylic distemper over a coat of wall primer on prepared surfaces of internal walls complete all as specified and directed

M & L for complete removal of existing treatment and applying texure paint internal walls complete all as specified and directed

M & L for complete removal of existing treatment and applying two coats of weather proof exterior grade paint over a coat primer on prepared surfaces of walls complete all as specified and directed

M & L for prepartion of newly plastered surfaces of walls and applying two coats of weather proof exterior grade paint over a coat primer on prepared surfaces of walls complete all as specified and directed

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, coping, sides of path etc finished even and smooth w/o using extra cement complete all as specified.

M&L for 18/19 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

M&L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

M&L for 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

S & F CP handle fancy type 100mm long 6mm dia suitable to be fixed with cubboard shutters complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqmbut not exc. 4.0 Sqm eahc.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified

M&L 2nd class hard wood flush shutter 35 mm thick covered with teak face veneer on both side complete all as specified and directed

Moulding as in cornices sectional area N exc. 6 sqcm, picture rails and the like complete all as specified and directed

M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and directed

S&F Brass Mortice lock, vertical type, size 65 mm including handle complete all as specified and directed by Engineer-In-Charge.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying melamine polishe complete all as directed

S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised Stainless steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed

Surface excavation n.exc 30cm deep and averagng 15cm deep and getting out Soft/loose soil etc complete all as specified and directed.

M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion (ATT - Chlorpyriphus 20%EC) per square metre of surface area, etc complete all as specified and directed.

M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion (ATT - Chlorpyriphus 20%EC) per square metre of surface, etc complete all as specified and directed.

M & L Treating the bottom and sides of excavation, junction of the walll and floor, external perimeter of building at the rate of 7.5 litres of emulsion (ATT - Chlorpyriphus 20%EC) per square metre of surface area, etc complete all as specified and directed.

M&L M-25 grade Reinforced Ready mixed cement concrete (Design mix) as in foundation, including raft footings, foundation beams, plinth beams, bases for column etc., basement slab, under reamed piles and mass concrete complete all as specified and as directed.

M&L M-25 grade Reinforced Ready mixed cement concrete (Design mix) as in beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, staircase, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies etc complete all as specified and as directed.

M&L for two coats of cement based paint over a coat of cement primer on newly plastered surfaces of walls including preperation complete all as specified.

M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat primer complete all as specified.

M&L for three coats of white wash on newly plastered ceiling surfaces including preperation complete all as specified.

M&L for non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles over and including 15 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified.

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished complete all as specified.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified.

M & L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc over and including 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished completed all as specified.

S & F for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., size of frame 125 x 60 mm complete, as specified and directed.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated.

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc. complete all as specified as directed by Engr-in- charge.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as directed.

S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as spfd and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised

S & F mild steel 200mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type)

S&F 140 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring

S&F in repair mild steel, powder coated brackets, decorative type for 25mm dia curtain rods, complete all as specified and directed.

S & F MS 25 mm dia Drapery curtain rods powder coated decorative typeincluding brackets complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 3% by weight of cement complete including prepartion of surface all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item)

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including preparation of surface all as specified and directed.

Supply only integral water proofing compound.

Cutting out V-groovesin plaster / masonary and inserting the waterproofing membrane and making good in CM 1:3 complete all as specified and directed.

M&L for Chequered cement concrete tiles 200 x 200 x 25mm thick, set, jointed and pointed in neat cement slurry with grey cememnt and pigment over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed.

M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS sheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick, masonary walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS sheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed

All as per Item No.84 above but for one 3/5 pin 5/6 Amps modular socket outlet point on same board with other switches complete all as specified and as directed at site.

All as per Item No.84 above but one 5 Amps 3/5 pin modular socket outlet on independent board complete all as specified and as directed at site.

All as per Item No.84 above but one modular bell/buzzer point controlled by one push button on the independent board complete all as specified and as directed at site.

M & L for providing point wiring with 4.00 Sq. mm (nominal area) single core PVC insulated FRLS sheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including PVC casing caping of adequate size bit not less than 20mm in width and 1.2mm thick with all fittings and accessories (ISI Marked) including Modular surface box of suitable size with modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one 3/5 pin 15/a6 Amp Socket outlet including one run 4.00 Sqmm (nominal area) PVC insulated FRLS sheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly complete all as specified and as directed

S&F Modular switch, single pole, one way, 6 Amps one module complete all as specified and as directed.

S&F Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed.

S&F Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.

S&F Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.

S&F Modular bell push with indicator 5 Amps one module complete all as specified and as directed.

S&F modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed.

M&L Bell Ding Dong AC, 230 V single pole all as specified complete all as specified and directed at site.

S&F Ceiling rose, 3 point PVC/Polycorbonate, isolated body complete all as specified and directed at site.

S&F for 22 W decorative wall mounted LED batten with aluminium housing and integrated electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing 35/36W racess mounting ultraslim LED falt panel 2'x2' made of extruded aluminium frame with high efficient LEDs & glare free opal diffuser, IP 20 suitable for armstrong/grid ceiling and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

Supply and Fixing 12W recess mounted LED slim round downlighter with high efficient LEDs & glare free opal diffuser, IP20 with integrated electronic driver including necessary connectons complete all as specified and directed.

S&F in repair CITY 3 Decorative wall light fixture made up of Polycorbante, suitable for and including 9/10W retrofit LED lamp B22 base complete all as specified and directed.

S&F for 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver, IP66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose complete all as specified and directed.

S&F in repair Foctory made board distribution in sheet metal enclosure vertical single door with 200 Amps rated bus bar, TPN, 4 Way, 240 Volts suitable for housing MCBs as incomer and SP MCBs as outgoing complete all as specified and directed.

S&F in repair power unit with 20A MCB & plug 240 Volts for Acs & Geysers complete all as specified and directed.

S&F SPN Enclouser with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specified and directed.

Supply and fixing Refrigerator, electric driven (Single Phase), Single Door, Stabilizer free of capacity 235 Litres BEE 5 Star rated complete all as specified and directed.

Supply and fixing Ceiling fan with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, Min Air delivary 245 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB) of TPN/FP of current carrying capacity 40 to 100 AMP in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated sheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including PVC conduit medium grade/ Cassing & Capping with all fittings suitable for concealed / surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed.

S&F in repair bracket suitable for fixing of building security light fitting made out from 40 mm bore GI pipe, medium grade 2 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and complete all as specified and directed.

M&L in repair Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 3.5 core complete all as specified and directed.

Supply and spread approved M-Sand / Robo Sand for cable laying /foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as all as specified and directed.

M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 115 x 75mm for cable protection complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated sheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed

All as per item No: 116 but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated sheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed

All as per item No.116 but One 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed.

All as per item No: 116 but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLS) insulated sheathed copper conductor single core multi stand flexible cable and 4.0 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.

M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed at site.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 & 15 Amps complete all as specified and directed at site.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.

M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed at site.

S&F LED batten in 22W decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F fan hook suitable for hanging of ceiling fan made out of MS Flats 40x5mm clamp or 12mm dia round bar of required length as directed at site duly welded/drilled including nuts, bolts and washers including painted with synthetic enamel painted and cutting/chisseling, making good distrurbed surfaces with cement mortar 1:3 and matching the surfaces by painting complete all as specified and as directed

DWARKA PERSHAD RADHEY RAMANLAL

Venkat Sai Enterprises

BUILDWEL

NAVANAND ENTERPRISES

STANDARD AGENCIES