EXECUTION OF WORKS UNDER MW (CONSERVATION) TO PROVIDING STORAGE AND OTHER FACILITIES INCLUDING PATHWAYS, BOUNDARY WALL AT SION FORT, SION MUMBAI. (F.Y.2023-2024). AS SPECIFIED IN THE BOQ.

Amount

Execution of works

Cutting down trees including trunks and branches with girths above 30 cm to 60 cm and stacking the materials neatly with all lifts and lead of 1000m. As directed and earth filling in the depression/pit if any. Etc. complete. osal of unserviceable material etc. complete. (Beyond 120 cm girth upto and including 240 cm girth) etc complete as directed by site icnharge.

Dismantling UCR stone masonry in cement mortar and RCC slab including stacking the materils as directed with all leads, lifts etc complete as directed by site icnharge.

Provision for Cutting, filling & leveling of the uneven area etc. complete . for all leads & lifts, all complete as per the direction of Engineer- in-charge. etc complete as directed by site icnharge.

Excavation for road way in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m .and spreading forembankment or stacking as directed by site incharge.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc complete as directed by site icnharge.

Providing and laying plain cement concrete 1:2:4 with 20 mm stone metal obtained from approved quarry including compaction etc complete as directed by site icnharge.

Providing uncoursed rubble stone masonry of trap/ granite/ quartzite/ gneiss metal in CM 1:5 for foundation of piers, abutments, wings etc. including bailing out of water, striking joints, scaffolding and watering etc complete as directed by site icnharge.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade etc complete as directed by site icnharge.

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc complete as directed by site icnharge.

Providing and constructing masonry in precast solid Concrete Block (Grade D - 50 As per I.S. 2185, Part-I, 1974, Reframed 1987 )having compressive strength 5-00 N / mm2) of size (300 mm x 200 mm x 150 mm)in cement mortar 1:6 for superstructure including striking joints on unexposed faces ,racking out joints on exposed faces, watering ,curing and scaffolding etc complete as directed by site icnharge.

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc complete as directed by site icnharge.

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc complete as directed by site icnharge.

Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006(Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc complete as directed by site icnharge.

Providing and laying Vitrified mirror/glossy finish having decorative type of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc complete as directed by site icnharge.

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc complete as directed by site icnharge.

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc complete as directed by site icnharge.

Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats etc complete as directed by site icnharge.

Providing and fixing ACP sheet for the toilet door in 25 mm x 75 mm Zindal Alumminum Section Colour anadiezed white 4 mm ACP sheet clear rubers S. S hinges and with fitting accessaries etc complete as directed by site icnharge.

Providing and fixing ACP sheet for the toilet ventilator, fitting accessaries etc complete as directed by site icnharge.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box etc complete as directed by site icnharge.

Provision for fixing of false ceiling in toilet 20 mm x 25 mm alluminum section with gyprex design sheet including fixing and all labour charges etc complete as directed by site icnharge.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. (For Gable Roof with truss). etc complete as directed by site icnharge.

Providing and fixing in position U.P.V.C. (Unplasticized PolyVinyl Chloride) having multi-chambered outer frame section (73x50) mm with an outerwall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x60)mm with steel reinforcement, multi-chambered sliders ash (46x82)mm with steel reinforcement designed to give optimum strength, 5mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets, silicon sealent, sliding handle, fixture and fastenings (couplings ,hinges) including with all required screw sand nuts with all necessary U.P.V.C sections as per the detailed drawing and as directed by Engineer-In-Charge etc complete as directed by site icnharge..

Providing and fixing puf roofing panel sheet of 60 mm thickness for roofing including all fitting and fixing charges as per drawing etc complete as directed by site icnharge.

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) etc complete as directed by site icnharge.

Providing and fixing on walls /ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion as directed etc complete as directed by site icnharge.

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion as directed etc complete as directed by site icnharge.

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc complete as directed by site icnharge.

Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super right angle stop tap with flange including all accessories etc complete as directed by site icnharge.

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut etc complete as directed by site icnharge.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. etc complete as directed by site icnharge.

Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black/ coloured granite of 180 mm thick stone black kadappa frame work including chromium plated coupling bottle-Trapusing CERA company or equivalent oval type wash basin model no 3448 as per detailed drawing or as directed by engginercharge etc complete.(Counter size 1.20 m x 0.60 m ) etc complete as directed by site icnharge.

Providing and fixing European type commode white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 liters cistern with black backlite seat and lid with chromium plated brass hinges including CI soil and vet pipe up to the outside face of the wall including 100mm dia GI plug bed, inltet pipe, stop tap etc. all fittings, cutting and making good walls and floor etc complete as directed by site icnharge.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipe sand stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fitting sand flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall etc complete as directed by site icnharge.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity of 2000 litres. etc complete as directed by site icnharge.

Providing and fixing branded make continental range S.S. pillar tap etc complete as directed by site icnharge.

Providing and fixing branded make continental range jet spray etc complete as directed by site icnharge.

Providing and fixing branded make continental range health faucet etc complete as directed by site icnharge.

Providing and fixing branded make continental range urinal auto flush valve etc complete as directed by site icnharge.

Providing and fixing branded make continental range bottle traps for basin and urinal etc complete as directed by site icnharge.

Providing and fixing A.B.S. body liquid soap container with liquid soap etc complete as directed by site icnharge.

Providing and fixing branded make contiental range. S.S. double coat hook etc complete as directed by site icnharge.

Providing and fixing SS swing dustbin (Capacity 30 ltrs) of approved quality and colour etc complete as directed by site icnharge.

Providing and fixing beveled edge Mirror 6mm thick of approved size placed above the wash basin conter flushed with wall etc. compelte.

Providing & constructing brick masonry inspection chamber 60cmx45cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round GS.W. pipes, brick masonry, plastering from inside and with frame fixed in cement concrete etc complete as directed by site icnharge.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.) etc complete as directed by site icnharge.

Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). etc complete as directed by site icnharge.

Provision for shifting for existing porta cabin near conference hall to the back side of RD office with the help of crane and CNG cutting machine etc. and refixing charges etc complete as directed by site icnharge.

Provision for Electrical work as per requirement etc complete as directed by site icnharge. Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/ CC. [RMT] etc complete as directed by site icnharge.

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking /inside pole/Bus bars or any other places. as per specification No: WGMA/ BW. etc complete as directed by site icnharge.

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/ inside pole / Bus bars or any other places. as per specification No:WGMA/BW. etc complete as directed by site icnharge.

Point wiring for independent plug, concealed type in min 20 mm FRLS. grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No WG-PW/SW etc complete as directed by site icnharge.

Wiring for plug on board with Switch socket, copper wiring and earthing as per specifi. No: WGPW/SW etc complete as directed by site icnharge.

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW etc complete as directed by site icnharge.

Supplying and erecting LED square /circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens outputof Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max.ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for urface type or spring loaded mounting clips complete with 3 years warranty. etc complete as directed by site icnharge.

Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. etc complete as directed by site icnharge.

Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen /W, CRI>70,CCT upto 6500K, THD0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. etc complete as directed by site icnharge.

Supplying and erecting street light Wall bracket made from 40 mm. dia G.I. pipe 1.2 m. in total length complete as per specification no. FGBKT/B etc complete as directed by site icnharge.

Supplying and erecting regular/standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FGFN/CF etc complete as directed by site icnharge.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. etc complete as directed by site icnharge.

Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. etc complete as directed by site icnharge.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. etc complete as directed by site icnharge.

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/1200/ 1400 mm. sweep, complete erected on provided switch board. etc complete as directed by site icnharge.

Supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof ABS plastic body, high grade SS inner tank & 3kW heating element with corrosion & hard water protection, with minimum 3safety protections (i.e. thermostat & thermal cut-out, function valve) complete with 6.5 bar pressure with standing capacity 230/250V, 50Hz, A.C. supply with inlet and outlet, with 3 core PVC flexible copper wire leads duly tested and marking sr. no. and date of erection complete. etc complete as directed by site icnharge.

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz,A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature,stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no.APAC/ WAC etc complete as directed by site icnharge.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm etc complete as directed by site icnharge.

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/MCB etc complete as directed by site icnharge.

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no.SW/ SWR / MCB etc complete as directed by site icnharge.

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP /TP MCBs of 12 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB etc complete as directed by site icnharge.

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/30A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame. etc complete as directed by site icnharge.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU etc complete as directed by site icnharge.

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP etc complete as directed by site icnharge.

Providing for resetting of undulated pavour block including all lead and lift etc. complete. etc complete as directed by site icnharge.

Provision for prepartion of ground for plantation of lawn by excavating the ground to the depth of 10cm, removing excavated materials from the site, levelling the ground with filling undulation, gap etc. with excavated materials etc. completed as directorate by site incharge .

Provision for laying red earth, free from pebble and rubbish like dried grass and other maerials, reddish colours and should be well sieved 90% to pass through IS sieve of 10mmin cluding filling red hill soil and well decomposed cow dung manuare in 4:1 proportion, mixing of red earth and cow dung manuare watering to the depth of 1 inches three times stacking at site, spreading etc complete as directed by site icnharge.

Provision for providing and laying Carpet Lawns grass having 0.30x 0.30 cm or 0.60x 0.60 cm in size with 3 inches thickness alongwith soil, campact and it should lush green in colour and well trimmed/ levelled at the time of supply including laying readymade carpet lawn on prepared ground an maintaining the same by watering and weeding till 30 days after the completion of lawn plantation, levelling, rolling afer estblishment of grass etc complete as directed by site icnharge.

Provision for fixing of garden light at the main enterance of the office complex including fitting,fixing and wireing of electric cable etc. complete as per direction of site incharge.

Providing and fixing 1.5 mm thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriat material cleaning the surface etc complete as directed by site icnharge.

YOGESH ASHOK BHOPALE

M/s. Suraj Construction