Construction of Public Toilet Building at Dharasuram Keela theru in Kumbakonam City Municipal Corporation

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Foundation

Plinth Beam

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, Iaid over silveroak joists of size 1ocm x 6.scm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) - Centering 1

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 1ocm x 6.50 cm spaced at abote 30 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) -Centering 2

For plane surfaces such as slab,beam, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades. too and bottom slab of RCC boxino. etc

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Basement

Ground Floor

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Basement

Ground Floor

Supplying and filling in foundation and basement with Good earth in layers of not more than 1scm thick well rammed watered and compacted etc., complete complying wilh standard specification.- Basement rilling

Brick Partition Walls using III class ground moulded chamber bricks of size 8 3/4"X4 1/4" X 2 3/4" in C.M 1:3 using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plale of 1 mm thick) of size 100 mm x 60 mm with a rebate of 30/ 35 mm x 15 mm on one side of the frame including supplying and fixing dovetail splayed end slainless steel Hold fasl etc., PWD SOR P.NO 158

Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to lS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality vamish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm

Supplying and fixing in position best approved of BIS quality PVC Waste waler pipes having a pressure of 6 kg. / sq.cm including cosl of special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 6.0 meter pipe length, etc., complete complying with standard specification.

110 mm dia pipe

90 mm dia pipe

Supply and delivery and fixing of HDPE tank as per lS '12701 / '1996 including loading,unloading, transportation and labour charges forfixing of the Gl pipes and specials for pipe connection works including cutting, threadind and fixino charges etc

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both inlemal and extemal waler supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work

25 mm Gun metal gate Vaulve

32 mm Gun metal gate Vaulve

Supplying and fixing in position 1smm dia brass CP screwdown tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specmcation and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on works)

SD Tap

Pillar Tap

Supplying, laying and.iointing PVC pipes (having working pressure 10 kg. sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fxing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismanfled portion to original condition with necessary brick work / cemenl concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying wilh standard specificatjons. The PVC pipes shall be got approved by Executive Engineer before use on works.

25mm dia

32mm dia

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and Fxing into wall with teak wood plugs, PVC clamps and screws making holes on the wall(or) drilling holes in the roof and making good the dismanfled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges up to 4 meter height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

32mm dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in intemal and extemal water supply arranqements

25 mm dia Coupler

32 mm dia Coupler

25 mm dia Elbow

32 mm dia Elbow

25 mm dia Bend

32 mm dia Bend

25 mm dia Tee

32 mm dia Tee

25 mm dia End Cap

32 mm dia End Cap

25 mm dia Reducer

32 mm dia Reducer

25 mm dia Reducer Tee

32 mm dia Reducer Tee

25 mm dia Reducer Elbow

32 mm dia Reducer Elbow

25 mm dia Jet Nipple

32 mm dia Jet Nipple

Supplying and fixing in position PVC specials ofthe following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complele complying with standard specilications. (The PVC specials should be got approved by the Executive Engineer before on work

110 mm dia PVC Elbow

75 mm dia PVC Elbow

110 mm dia PVC Elbow with Door

75 mm dia PVC Elbow with Door

110 mm dia PVC Tee

75 mm dia PVC Tee

110 mm dia PVC Tee with single Door

75 mm dia PVC Tee with single Door

110 mm dia PVC "Y" with single Door

75 mm dia PVC "Y" with single Door

Supplying and fixing in position best quality and approved make lndian made white / colour glazed earthenware wash hand basin of size 550 x400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "8" class Gl waste pipe with rubber plug and chain, 1smm dia GM wheel valve, 15mm brass nipple, 'lsmm dia nylon conneclion, 32mm dia CP brass waste coupling including fixing of wash basin using Cl brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets wjth two coat of painting over a priming coat of anti-conosive paint including testing for leakages etc., complete compving with standard specilication and as directed by the departmental officers. (The wash hand basin and specials should be gol approved by the Executive Engineer before use on works).

Supplying and fixing in position 15mm dia C.P.Shower rose & stop cock ol approved make confirming to lS specificalions and quality including cost oi Shellac thread etc. complying with standard specification.

C.P Shower Rose

Stop Coke

Supplying and fixing in position C.P. Towel rail 600mm long and 20mm dia with brackels of same materials including cost of teak wood plug and C.P. Screws etc. complete complying with standard specification.

Supplying and fixing in position C.P. Soap tray of size150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification

Supplying and fixing in position lndian make bewelled edge miror of size 600 x 450mm quality including cost of Rawal plugs, brass screws. etc.

Supplying and fxing in position white / colour glued European Water Closet of best quality and approved make wilh 10O mm "P" or "S" trap connecting with Cl pipe of 100mm dia / PVC pipe of 11omm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 'l 0 liters capacity PVC I 12.5liters capacity porcelin low level flushing tank with a pair of Cl brackets, etc., complete with all fittings such as 1smm brass ball vafue with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using lndian adopter joint including all internal fittings

Supply and fixjng in position of best lndian make white / colour glazed earthenware lipped mouth flal back urinal of best quality and approved make of size 430mm x 260mm x 350mm with Gl pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia Gl pipe of required length, 'l5mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying wilh standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing position Cl Nahani Trap I Floot kap of the following sizes with best slainless steel gralings of approved brand and quality, lixed over a bed of brick ielly lime concrete 1:2:5 (One part of lime, two part of Sand and five part of 40mm gauge brick jelly) and flnished with Cement Mortar 1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving conneclion 10 the Cl / PVC pipes, etc., complete complylng with slandard specification. Ohe Nahani Trap should be gol approved by the Execulive Engineer before

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, olher clamps, screws nails etc.,complele complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150x25mm in front & 200x75mm in rear (wall side) with a depih of 110mm. The pipe is to be fixed by means of "U" clamps at lhe centre of pipes lo be fixed.1'1omm dia PVC Pipe [4 kg/SqCm

Providing Rain water HarvestingWell dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 2omm hard broken jelly to a height of 30cm each supPlying fabricating 1 No. of 6mm dia MS rod vertically and J No. of 6mm MS rod circumferentiallY tied together with 1 I guage binding wre for rings including necessary earth work excavation 1 m dia lo depth of 1 supplying and lilling 40mm HBG inside the erected well ring to a depth No and top covered with RCC circular perforated cover slab of ,| 90cm, fabrication oi 6mm and 5cm thick which inclusive of cost and at 't5 cm spacings on both directions and one 6mm M.S at the edge of the slab circumferentially including cost of finishing and well placing tn position and disposing off with all initial leads and lifts tn places AS shown by the etc., complete in all respects. Cost

Earthling as per lSl Specification with an ea(h electrode ol 2.1mt class 'B' Gl pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoal, common salt, G.l-reducer, check nuts etc., and masonry work and providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers. (sD 233)

Supplying and run off 8 SWG copper wire on walls or below ground level with necessary'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental otflcers.(SD 75)

Supplying and Fixing of 3 Phase DB with MCB 12 way TPMCB sheet steel distribution boards (flush type/surface type) fitted with bus bars and neutral links with three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / lsolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / lsolator (totally 12 Nos.) for sub incomers in 3 segments with label holder etc.complete in all respects as directed by the depa(mental offi cers

Supply and run otf 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with lSl mark confirming to 15:694/1990 with continuous earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (denved from SD 55)

Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with lSl mark confirming to IS:694/1990 with continious earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall ior mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54)

Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuse unit(500v)32A neutral link and earth link (1" x 1/8" Copper flat) on T.W plank of size 600mm x450mm x 19mm with supportingT.W.reepers of '1" thick oneither sider with painting withsuitable bolt and nuts for fixingthe TW plank on wall withearth connection and interconnection wlh 7120 Pvcinsulated copper wire from EBmeter to fuse unit. SO 127)

Supply and run ol 4 core 16 Sq.mm PVC Armoured cable of 1100 V grade with lsl mark.(Part E r) V

Supply and run of 4 core '10 Sq.mm PVC Armoured cable of 1100 V grade with lsl mark.(Part E c) V

Wiring with 2 x 1.5 sqmm (22 lo.3 ) PVC insulated single core unsheathed copper conductor cable ol 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. swtch with continuous earth Wre connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic requlator). SD 23

Wiring with 2 x 1.5 sqmm (22 10.3 \ PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories rnflush \Mth $all with 150 x 100 x 1'13 mm TW swtch box wth 3mm hylum sheet cover for 5A 3 pin non nteT locking CS plug with continucus eartn wrre connecticn of 14 SWG TC wire anc n'akin j Eood of the concealed portion with suitable ccloJr'3r ccncealed PVC plug point. SD 38

18 W LED Tubelight for T8 Fitting Single side (15- e)

Supply and Fixing of 12 inch (30cm dia) light duty Exhaust fan including cost of materials, labours,lead,lift, etc. complete.

Selva Construction