Repair and maintenace of damaged boundary wall in the campus of Saryu Nahar Khand 1 Gorakhpur

Amount

E/W in excavation in foundation and filling on required places including proper levelling, dressing, manul compaction and T&P etc. complete in all respect.

Laying plain C.C. 1:2:4 under foundation with 25 mm to 50 mm size Ahiraura stone ballast and Kanahar sand not less than 2.2 F.M. including cost of all material labour and T&P etc. required for proper completion of work.

Laying R.C.C. 1:1.5:3 with 10 mm to 20 mm size Dalla grit and Kanahar sand not less than 2.2 F.M. including cost of all material labour and T&P etc. required for proper completion of work.

Cutting, bending, binding and placing in position of steel reinforcement including cost of all material labour and T&P etc. required for proper completion of work.

Centering and Shuttering for RCC work in building works

First class brick work in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

15mm cement plaster in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

Distempering two coat of oil bound distemper of approved make of Berger, Johnson & nicholsen, Shalimar, Asian, Nerolac over one primimg coat on cement primer on new surface after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even with plaster of paris and sand papered smooth including cost of all material, labour , T&P etc. required for proper completion of work.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Fabrication of angle iron truss i/c cutting, drilling holes, riveting by weilding as necessary with one coat of red oxide primer and its carriage upto site i/c cost of all materials, labour T&P, etc. required for proper completion of work.

M/S SURAJ CONSTRUCTION