Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹28.6 L+₹12,923.98 (0.45%)Rejected-Finance HAPPY HOME FRIENDS COLONY RAMGARH CANTT RAMGARH JHARKHAND PIN 829122 | RAMGARH | JHARKHAND | 829122 | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹29.8 L+₹1.3 L (4.70%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹31.3 L+₹2.9 L (10.1%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹33.1 L+₹4.6 L (16.3%)Rejected-Finance H NO 1346 SECTOR 13 P HISAR 125005 HARYANA | HISAR | HISAR | HARYANA | 125005 | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹47.4 L
EMD Value
₹97,500
Closing Date
15 May 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS PIN-913 865 C/o 56 APO
CERTAIN REPAIR REPLACEMENT OF HARD STANDING INTERLOCKING TILES CHEQUERED TILES RETAINING WALLS FENCING INCLUDING PATHWAYS AT SECTOR D UNDER AGE BR I OF GE 865 EWS
2025_MES_704687_1
865/EWS(NIT-54)/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
Yes
GE 865 EWS
₹97,500
9 Jul 2025
18 Apr 2025
17 May 2025
18 Apr 2025
15 May 2025
2 May 2025
Amount
Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolised material out of Military station.
Demolition of cement concrete in any description and any position not otherwise specifically provided for.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as Spfd
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6, but except blocks, complete all as Spfd
M&L for 15mm thick rendering on fair faces of brick works finished even and smooth with water proofing compound 3% of cement without using extra cement in cement mortar 1: 4 including taking dawn complete all as specified and as directed
Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika
M&L for preperation of new plastered wall surface of any description and applayng two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.
M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar.
Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed.
M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..
M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickiness M-40 grade complete all as specified and as directed by Engr-in-Charge..
M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge..
M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge..
M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..
M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.
M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation all as specfed and drected.
M&L dressed granite or trap / Precast cement concrete type C2 (1:3:6) (12.5 mm nominal size of graded course aggregate) Kerb stones roughly squared stones of size 20cm x 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall noot exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description).
M&L for preperation of new surface on Brick,Concrete,Wall and Stone surface of any description descripton and applying two coat of synthetic enamal paint over a coat of primer complete all as specified and as directed.
M&L Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing boltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 as directed and fixed
M & L for Excavating in post holes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm.
M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc.
Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails straining bolts,etc.including provision of binding wire,including dismantling n. exc 4 kg all as specified and as directed.
Supply only chain link MS galvanised fencing of size as directed by Engr-in-charge.
M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in coping ,mass concrete.
M&L cement concrete Type C21:3:6 (40mm graded aggregate)in Surface channels and drains all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
Extra for forming fair finished drain or channel 55cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
M&L for precast cement concrete Type C1, 1:3:6 (20mm graded aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed
Mild steel TMT bars10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .
S&F mild steel screw bolt 5 to 10 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one waher and hexagonal nut length exc 5cm but not exc 10 cm long.
S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel,) sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complet, Fe 410-W (Gde-E-250) quality A
Preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
M & L for 100 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in floor of hard standing finished even and smooth with out using extra cement all as specified..
Supply only plastic dividing strips,1.5 mm thick and 38mm wide inserted in position confirm to design
M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing .
Deduct Schedule of Credit of Rs (-) 46712.50 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
M/S UNITED CONSTRUCTION CO. (BID ID -3292785)
PARIDHI CONSTRUCTION (BID ID -3297970)
ABID CONSTRUCTION COMPANY (BID ID -3292090)
Horizon Construction Company (BID ID -3292940)
ESS AAR ENTERPRISES (BID ID -3297038)
PADMA ENTERPRISES (BID ID -3293405)
M/S RIGDOL CONSTRUCTION (BID ID -3291468)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .