Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC 18969 A 1 SHRI GURU TEG BAHADUR NAGAR BIBIWALA ROAD STREET NO 15 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹15.8 L+₹3.4 L (27.9%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vinod Kumar AE (Civil) AGE BR II Offg GE(S)Bathind
GE(S)Bathinda Bathinda Mil Stn
GE(S) BTD TOKEN NO 54 OF 2022-23 WELCOME MAINT AND CERTAIN ESSENTIAL REPAIRS IN OFFRS AND ACCN IN OLD NILGIRI AND NEW NILGIRI ENCLAVE UNDER AGE BR I UNDER GE(S) BATHINDA AT BATHINDA MIL STN
2022_MES_569369_1
GE(S)/BTD/TOKEN NO 54 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(S)Bathinda
Class E
Category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹40,000
Yes
6 Feb 2023
15 Dec 2022
14 Jan 2023
15 Dec 2022
12 Jan 2023
29 Dec 2022
Amount
Taking down chowkats or frame with shutter (without taking off shutters from the frames) n. exc 1.50 sqm each complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4.00 Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removed from site complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) complete all as specified and directed.
M & L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.
S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.
S & F 2nd class hardwood, factory made shutters, 35 mm thick plain framed panelled shutters (any number of panels) with with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both side. The size of rail & stiles as per IS :1003 (Part I), kiln seasoned and chemically preassure treated, complete all as specified and directed.
M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F in repairs 18/19mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.
S & F in repairs 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws, etc. as in shelves, partitions, almirahs or built in cub boards etc. all as specified
S&F in repairs telescopic hinges for drawers etc, taking out drawers & refixing the same after replacement of hinges etc complete all as specified and directed.
Supply and fixing in repair 40 mm dia, cupboard brass knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed.
S & F for catcher such as in cupboards etc to catch & support shutters of best quality complete all as specified and directed.
Supply and fix Brush type gasket/seal of best quality fixed to bottom rail of aluminium door complete all as specified and directed.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing complete all as specified and directed.
S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and directed.
S&F galvanised Mild steel wire cloth, 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple or fixed with beads supplied with joinery, complete all as specified and directed.
S&F in repairs galvanised Mild steel wire cloth, 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.
M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified and directed.
M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area n.exc 6 sqcm complete all as specified and directed.
S & F in mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
S&F 150mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 125mm long Aluminum anodised, handles, cast type complete all as specified and directed.
S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.
S & F in repairs 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and directed.
S & F hasp & staple 100mm size, aluminium anodized, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F hasp & staple 150mm size, aluminium anodized, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30mm complete all as specified and directed.
S & F in repairs 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement complete all as specified and directed.
M&L for 25mm dia stainless steel pipe curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed.
S&F in repairs end knobs for PVC coated MS pipe curtain rods, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/springs clips and fixing new ones complete all as specified and directed.
S & F for 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.
S & F for 4 mm thick, figured glass, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.
S&F 5.5 mm thick, sheet glass, plain with necessary sliding arrangements for built in cupboard, etc. complete all as specified and directed.
S&F in repair channels of aluminium incuding roller of best quality for built in cup board by taking down exisiting glass and refixing the same glass after replacement of aluminimum channels and roller complete all as specified and directed.
M & L for welding in repairs n. exc 6mm thick metal and n. exc 2.50 cm in length complete all as specified and directed.
S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) incl rubbish of the premises complete all as specified and directed.
Roughening surfaces of old concrete floor by picking , sweeping clean & washing down with watetr to remove dust etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.
M & L for 50mm thick cement concrete 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 , complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 complete all as specified and directed.
M&L glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick on vertical surfaces, etc. set and jointed in neat cement slurry/paste and pointed to match the surfaces over and incl 10 mm thick plaster in CM 1:4, ccomplete all as specified and directed.
M & L light shade vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.
M & L for light shade vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.
Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, sealing joints with solvent cements or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles floor shall be measured and paid separately), complete all as specified and directed.
M&L 25mm thick PCC type B1, 1:2:4 mix (20 mm graded aggregate) as in floors, sub-floors, etc. finishing even & smooth or even and rough complete all as specified and directed.
M & L marble work note less than 16 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
M&L for Machie cut kota stone slab flooring 18-22 mm thick over 15 mm thick in CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of sab including rubbing,grinding and polishing (mirror finish) complete all as specified and directed.
M&L for Machie cut kota stoe slab flooring 18-22 mm thick in riser/trends of steps(in Single piece), skirting, dado and pillars over 10 mm thick rendering in 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of sab including rubbing,griding and polishing mirror finish complete all as specified.
Taking down cement plaster of any description/terrazzo finish, etc.; from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Demolition of brick work of any description built in cement mortar complete all as specified and directed.
M&L brick work with sub class `B' (Old Size) bricks straight or curved on plan exc 6.0m mean radius built in CM (1:6) complete all as specified and directed.
M&L brick work with sub class 'B' (Old Size) bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4) complete all as specified and directed.
M&L 15mm thick cement plastering in CM 1:6 on other than fair faces of brick work or concrete surfaces and finished even & smooth (without using extra cement) complete all as specified and directed.
M&L 15mm thick cement plastering in CM 1:4 on fair faces of brick work or concrete surfaces and finished even & smooth (without using extra cement) complete all as specified and directed.
M&L rendering 5mm thick in CM 1:3 on concrete surfaces as in ceiling and finished finished even & smooth (without using extra cement) complete all as specified and directed.
M&L PCC 1:5:10 type C-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and directed.
Repair to concealed PVC (PE-AL-PE) pipes on walls including replacement of fittings (such as elbows, tees, reducers, couplers,short pieces, connectors, etc.), making joints leak proof and making good in CM 1:3 or PCC 1:2:4 (replair/replacement of tiles shall be measaured & paid separately), complete all as specified and directed.
Supply only plastic-metal composite fittings (such as elbows, Tees, reducers, couplers, connectors/unions, etc) suitable for PE-AL-PE composite pressure pipes of 1620 (outside dia 20mm) complete all as specified and directed.
Supply only plastic-metal composite fittings (such as elbows, Tees, reducers, couplers, connectors/unions, etc) suitable for PE-AL-PE composite pressure pipes of 2025 (outside dia 25mm) complete all as specified and directed.
Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection for refixing or removal complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection for refixing or removal complete all as specified and directed.
S & F 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.
S & F 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.
Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors including cleaning etc complete all as specified and directed. (i) Rates quoted by the contractor deemed to be included S & F new fittings as required
Refixing old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors including cleaning etc complete all as specified and directed. (i) Rates quoted by the contractor deemed to be included S & F new fittings as required
S & F to walls/chases/ceilings or laying in floors Polyethylene-Aluminium-Polyethylene (PE-AL-PE) comosite pressure pipes 1620 (20mm outer dia) including all crimp type internal sealing Plastic-Metal Composite fittings(such as elbows, Tees, reducers, couplers, short pieces, connectors, etc) and hooks/clamps complete all as specified and directed.
S & F to walls/chases/ceilings or laying in floors Polyethylene-Aluminium-Polyethylene (PE-AL-PE) comosite pressure pipes 2025 (25mm outer dia) including all crimp type internal sealing Plastic-Metal Composite fittings(such as elbows, Tees, reducers, couplers, short pieces, connectors, etc) and hooks/clamps complete all as specified and directed.
Refixing old Polyethylene-Aluminium-Polyethylene (PE-AL-PE) comosite pressure pipes 2025 (25mm outer dia) and connections in new or old position as on walls ceiling floors including cleaning of pipe etc complete all as specified and directed. (i) Rates quoted by the contractor deemed to be included S & F new fittings as required
Refixing Polyethylene-Aluminium-Polyethylene (PE-AL-PE) comosite pressure pipes 1620 (20mm outer dia) including all crimp type internal sealing Plastic-Metal Composite fittings(such as elbows, Tees, reducers, couplers, short pieces, connectors, etc) and hooks/clamps and including cleaning of pipe complete all as specified and directed. (i) Rates quoted by the contractor deemed to be included S & F new fittings as required
S &F in repairs 15mm bore, long body, bib taps, Chromium Plated, cast copper ally, fancy type, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15mm bore, Pillar taps, cast copper alloy, chromium plated, fancy type with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.
S & F in repairs 15mm bore, brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S & F in repairs chromium plated stop valves, cast copper alloy, fancy type with long shank and cup (concealed type) complete all as specified and directed.
S & F in repairs 15mm bore chromium plated angle cock screwed both ends for iron pipe complete all as specified and directed.
S & F in repairs 32/40mm size waste fittings, brass, chromium plated, for glazed ware sinks, basins etc. with long flange end embedded in red lead cement and other end fixed complete all as specified and directed.
S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directed.
Fixing only in repairs basins of any size & description including removing old basin carefully on existing brackets complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.
Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.
S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.
S & F in repairs plastic water closet seat , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F in repair 10ltr capacity, PVC valveless, syphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed.
S & F in repairs sinks with drainage board made of size 915mm x460mm bowl size 410mm x330mm x160mm stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall complete all as specified and directed.
S & F in repairs brass chromium plated shower rose 100mm dia with swivel joints with and including suitable shower arm any size, complete all as specified and directed.
S & F in repairs PVC connections 15mm size with brass nuts of length 450mm complete all as specified and directed.
S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.
S & F in repairs health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.
S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.
S & F chromium plated towel ring complete all as specified and directed.
S & F Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc; complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard & railing 60 cm long, complete all as specified and directed.
S & F in repairs soap dish stainless steel, of size 150mm x 150mm x 0.9mm thick complete all as specified and directed.
S &F PTMT mirror cabinet of size 380x450mm best quality complete all as specified and directed.
S & F in repairs brass chromium plated, bottle traps of 32mm bore for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.
S&F stainless steel plate racks of size 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed.
S & F in repairs chromium plated grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed.
S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed.
M&L for grinding and polishing of old treated terrazzo topping/ marble/kota stone flooring including treating the surfaces with wax polishing etc and clean the surface complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
S & F cast iron, waste and vent pipe 75mm bore(sand cast) with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.
S & F cast iron, waste and vent pipe 100mm bore(Sand cast) with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.
S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.
S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.
Demolition of re-inforced cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, facia, railing and the like, complete all as specified and directed.
M&L for mild steel TMT bars 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally etc and binding with mild steel wire not less than 0.9 mm dia as in reinforcement etc. complete all as specified and directed.
S & F formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and spiral stair case not exceeding 200mm tick complete all as specified and directed.
M&L providing cement concrete (PCC) 1:2:4, type B0 (using 12.5mm graded crushed stone agrregate) as in broken or cracked Chhajjas, RCC columns, beams, stairs/steps etc in one or two layers as required (thickness from 25mm to 40mm) and finshing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/cracked concrete portion and plaster etc and applying neat cement slurry before providing concrete, complete all as speicified. (Note : 1. Rates deemed to include for any scaffolding/ ladders or any other mean to work in two story buildings including welding of reinforcement. to be provided for repairs of chhajjas, beams, columns, stair case, fins, facia etc. 2. The re-inforcement shall be measured & paid in subsequent item separately )
S&F powder coated aluminium glazed and wire gauged door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass/stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.4 mm and fixed with tinned tacks ro galvanised wire stapple, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
S & F three track aluminum powder coated sliding windows using two tracks for glazed window shutter and one track for wire gauged shutter including provision of necessary rubber gasket complete with 4.8 mm thick plain/tinted/itched glass/stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.4 mm all as shown in drawing NO. CE BT/SK-936 sheet 1/1 complete all as specified and directed.
S & F aluminum powder coated vents including provision of necessary rubber gasket for fixing glass panes etc.complete with 4.8 mm thick plain/tinted/itched glass/stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.4 mm all as shown in drawing No. CE BT/SK-936 sheet 1/1 complete all as specified and directed.
M & L for one coat of wall putty on surfaces of wall & ceiling including making up depressions etc. complete all as specified and directed.
Complete removal of existing treatment of any description on old wall surfaces of any description, prepration of surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and directed and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified. (b) Two coats of acrylic emulsion distemper by using airless spray over and including a coat of acrylic emulsion internal primer, complete all as specified. NOTE : Contractor may use manual scrapping tools for complete removal and surface preparation with prior approval of EIC in case using of mechanical equipments are not possible.
M & L for applying one coat of oil bound distemper of approved tint or shade on wall surfaces including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and directed.
M & L for applying one coat of oil bound distemper of approved tint or shade on ceiling including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and directed.
M & L for applying two coats of oil bound distemper of approved tint or shade on wall surfacesincluding preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and directed.
M & L for applying two coats of oil bound distemper of approved tint or shade on ceiling including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and directed.
M&L for applying two coats of oil bound destemper over a coat of primer on newly plastered wall surfaces including preparation of these surfaces complete all as specified and directed.
M & L for applying one coat of white wash on old decorated plastered or unplasted surfaces on walls, including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with white wash, smoothering the surface and finally cleaned floors complete all as specified and directed.
M & L for applying two coats of white wash on old decorated plastered or unplasted surfaces of walls, etc including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with white wash, smoothering the surface and finally cleaned floors complete all as specified and directed.
M &L for applying three coats of white wash on newly plastered wall surfaces including preparation of these surfaces complete all as specified and directed.
M & L for applying one coat of white wash on old decorated plastered or unplasted surfaces on ceiling, including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with white wash, smoothering the surface and finally cleaned floors complete all as specified and directed.
M & L for applying two coats of white wash on old decorated plastered or unplasted surfaces of ceiling, etc including preparation of these surfaces complete all as specified and directed.
M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed.
Complete removal of existing treatment of any description on old wall surfaces of any description, prepration of surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified. (b) Two coats of exterior acrylic emulsion by using airless spray over and including a coat of acrylic emulsion external primer, complete all as specified. NOTE : Contractor may use manual scrapping tools for complete removal and surface preparation with prior approval of EIC in case using of mechanical equipments are not possible.
Complete removal of existing treatment on walls and ceiling surfaces and remove vegetable/plants roots from walls/chajjas & preparation of surfaces for further treatment, etc complete all as specified and directed.
M&L for preparation of old decorated, plastered/unplastered or concrete surfaces on walls including cornices, chajjas & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. and applying one coat of exterior emulsion paint over wall surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed.
M&L for preparation of old decorated, plastered/unplastered or concrete surfaces on walls including cornices, chajjas & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. and applying one coat of exterior emulsion paint over ceiling including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed.
M&L applying two coats of plastic emulsion paint of any tint & shade over a coat of primer on prepared wall surfaces complete all as specified and directed.
M&L applying two coats of plastic emulsion paint of any tint & shade over a coat of primer on prepared ceiling complete all as specified and directed.
M & L for applying two coats of exterior paint over a coat of primer on newly plastered wall surfaces including preparation of these surfaces and matching the colour/tint with existing surfaces complete all as specified and directed.
M&L for preparation of old decorated, plastered/unplastered or concrete surfaces on walls including cornices & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. complete all as specified applying one coat of cement base paint on these surfaces etc.; complete all as specified and directed.
All as per item No 147 above but two coats of cement base paint
S & F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet and fixing in position on back side of cup boards and the like complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of primer over prepared newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed.
Preparation of old painted wooden and wood based surafaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint, quality, colour on these surfaces, including cleaning of floor/wall surfaces complete all as specified and directed.
All as per item No 151 abve but two coats of synthetic enamel paint
M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old painted steel & iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint of approved tint, quality, colour on these surfaces, including cleaning of floor/wall/glass pane surfaces complete all as specified and directed.
All as per item No 154 above but two coats of synthetic enamel paint
M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
M/S BHAGWATI CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .