Improvement to Left service bank of Ambagadia Sub-minor from RD 0.00km to 3.00km, Madhapur Sub-minor from RD 1.00km to 2.00km and Kandada minor from RD 00km to 3.00km.

Clearing & grubbing shrub, jungles including uprooting stumps of trees and trees below 1.0 m. girth and thick bushes including bamboo clamps based on pre-measurement disposing the debris away from the work site with all leads, lifts and delifts with cost of all labour, hiring and running charges of all machineries, cess but excluding GST,etc. complete as per direction of Engineer-in-Charge.

Earth work in excavation in all kinds of approved soil from approved borrow area by mechanical means with all leads, lifts and delifts including loading into the transportation vehicles and unloading from transported vehicles and depositing the same on properly prepared and scientifically approved surface including rough dressing and breaking the clods to maximum 5cm. to 7cm. ,laying in layers not exceeding 22.50cm including removal of roots, shrub jungles, bushes and all foreign debries from the earth and benching the old embankment, sectioning, cambering the earth work, quality control test including construction , maintenance, watering, dewatering and lighting of haul roads and borrow area including mobilization and demobilization of men and machineries and all incidental charges required for the completion of work, complete in all respect including cost of royalty with labour cess, DMF, EMF,with additional charge but excluding GST as per approved drawing, specification and direction of the Engineer-in-Charge. (Measurement shall be taken on finished compacted section .Borrow area is to be arranged by the agency at his cost and responsibility)

Watering earth work and compaction with all types of compacts equipments under OMC conditions to attain minimum proctor dry density of 95.00% for all heights of banks and slopes with required quality control test including mobilization and demobilization of men and machineries and all incidental charges required for the completion of work, complete in all respect including cost of royalty with labour cess, but excluding GSTas per approved drawing, specification and direction of the Engineer-in-Charge.( Measurement shall be taken on finished compacted section .Borrow area is to be arranged by the agency at his cost and responsibility)

Earth work in excavation of foundation in hard soil by manual/mechanical means including levelling and dressing the bed and depositing the excavated earth away from the working area with all leads, lifts, delifts, cost of labour, cess but excluding GST etc. complete as per direction of Engineer-in-Charge.

Filling foundation and plinth with sand by mechanical/manual means and laying in layers duly compacted, watering including cost, carriage, royalty with all leads, lifts, delifts, cess, DMF, EMF,with additional charge but excluding GST etc all complete as per drawing and specification and as per the direction of Engineer-in-Charge.

Providing & laying cement concrete conforming to M-15 grade in approved surface using 40 mm size and down graded black hard granite (crusher broken) chips and sharp sweet sand of approved grading from approved quarry for CC work conforming to specification, mixing by concrete mixture including hoisting and laying concrete in position, compacting with concrete vibrator with all leads, lifts, delifts for mix concrete, royalty of all materials, cess,DMF, EMF,with additional charge but excluding GST, other charges as applicable including dewatering, curing for specified days by suitable means with supervision charges including mobilization and demobilization with cost of construction and dismantling of gangway and scaffolding, chute with all materials, construction of coffer dam / approach road, diversion road, site illumination, hire and running charges of machineries, dewatering by suitable means required for the work as per approved drawing and specification complete with all cost as directed by Engineer-in-Charge.

Providing & laying cement concrete conforming to M-15 grade in approved surface using 20 mm size and down graded black hard granite (crusher broken) chips and sharp sweet sand of approved grading from approved quarry for CC work conforming to specification, mixing by concrete mixture including hoisting and laying concrete in position, compacting with concrete vibrator with all leads, lifts, delifts for mix concrete, royalty of all materials, cess,DMF, EMF,with additional charge but excluding GST, other charges as applicable including dewatering, curing for specified days by suitable means with supervision charges including mobilization and demobilization with cost of construction and dismantling of gangway and scaffolding, chute with all materials, construction of coffer dam / approach road, diversion road, site illumination, hire and running charges of machineries, dewatering by suitable means required for the work as per approved drawing and specification complete with all cost as directed by Engineer-in-Charge.

Providing & laying cement concrete conforming to M-25 grade in approved surface using 20 mm size and down graded black hard granite (crusher broken) chips and sharp sand of approved grading from approved quarry for RCC work conforming to specification, mixing by concrete mixture including hoisting and laying concrete in position, compacting with concrete vibrator with all leads, lifts, delifts for mix concrete, royalty of all materials, cess,DMF, EMF,with additional charge but excluding GST as applicable including dewatering, curing for specified days by suitable means with supervision charges including mobilization and demobilization with cost of construction and dismantling of gangway and scaffolding, chute with all materials, construction of coffer dam / approach road, diversion road, site illumination, hire and running charges of machineries, dewatering by suitable means required for the work as per approved drawing and specification complete with all cost as directed by Engineer-in-Charge.

Supplying, straightening, cutting, bending, binding and tying the grills using uncoated HYSD bars cutting, bending of designed diameters and placing in position for fabrication and fixing the reinforcement grills including laps, ties, providing chairs and welding whenever necessary with all leads, lifts and delifts with all labour, cess but excluding GST complete including cost, conveyance of steel and binding wires complete and as per the direction of Engineer-in-Charge.

Rigid & smooth centring, shuttering for CC works including false works and dismantling them after casting including proper curing with cost, carriage, cess but excluding GSTetc. all complete as per specification and direction of Engineer-in-Charge.

Rigid and smooth steel cantering and shuttering at all heights of bridge work such as well curb, well staining, well cap, pier and abutment shaft, pier and abutment cap, wing wall, tie beam, road kerb and dirt wall using required nos. of vertical and horizontal supports of scaffolding with joists, N.G. rails and channels and steel shuttering plates including welding, bolting, cost, conveyance, and cost of scaffolding gangway etc. including cost of conveyance of but excluding GST dismantling and disposing debris clear of work site complete to receive reinforcement grills and concrete as per requirement as directed by Engineer-in-Charge.

Supplying,laying , fixing and fitting in position of RCC (Non-pressure) NP3 of 600 mm dia hume pipes and filling in joints using cement mortar (1:3) with Reinforced Cement Concrete (1:2:4) with 12 mm and down graded hard granite crusher broken coarse aggregates complete including cost, carriage of hume pipe,cost of labour,curing, cess etc. but excluding GST complete as per specification and direction of Engineer-in-charge.

Filling foundation and plinth with excavated earth by mechanical/manual means and laying in layers duly compacted, watering including cost, carriage, with all leads, lifts, delifts, cess but excluding GSTall complete as per drawing and specification and as per the direction of Engineer-in-Charge.

Quarrying, collecting, supplying and stacking of good quality of moorum and sand in regular box heap size of 1.50m X 1.50m X 0.50m to be measured as one cum and admixing moorum and sand in (70 : 30) proportion and laying in sub-base of road in layers not exceeding 150 mm thick with all leads, lifts and delifts including cost, conveyance, royalty, cess,DMF, EMF,with additional charge but excluding GST DMF, EMF, other charges as applicable, watering and compaction to required density in OMC condition with P.R.R., hire and running charges of machineries etc.complete as per specification and direction of the Engineer-in-Charge.

Quarrying, collecting, supplying and stacking of good quality of moorum from approved quarry and staking at work site in regular box heap size of 1.50m X 1.50m X 0.50m to be measured as one cum laying in sub-base of road bearm in layers not exceeding 150 mm thick with all leads, lifts and delifts including cost, conveyance, royalty, cess, DMF, EMF,,with additional charge other charges as applicable, watering and compaction to required density in OMC condition with P.R.R., hire and running charges of machineries etc.complete as per specification and direction of the Engineer-in-Charge.

Collecting & Supplying approved quality IRC Gr.II Metal and chips from approved quarry and stacking at work site in regular stacks for pre measurement including cost, carriage & royalty & taxes of all materials, DMF, EMF,,with additional charge other charges as applicable etc.but excluding GST complete conveying from stacks laying spreading & compacting aggregate of specific size to water bound mechadum specification including spreading to uniform thickness hand packing, rolling with 3-wheel roller 8-10 ton in stage to proper grade and camber applying and borrowing requisite type screening binding materials to fill up the interstics of coarse aggregate watering and compacting to the required density as per clause 404 of MORT & H specification of roads and bridges works etc and excluding GST complete as per the direction of the Engineer-in-charge.(5th Revision) Output 360 Cum