Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance SARNA TOLI LOHARDAGA | LOHARDAGA | LOHARDAGA | JHARKHAND | Admitted-Finance |
| 2 | Admitted-Finance 30 INDUSTRIAL AREA KOKAR RANCHI 834004 JHARKHAND | RANCHI | JHARKHAND | 834004 | Admitted-Finance |
Tender Value
₹60.1 L
EMD Value
₹1.2 L
Closing Date
10 Jul 2023, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer JIIDCO Ltd.5th floor, Udyog Bhawan,Ratu road, Ranchi-834001 , Ranchi
Remaining work of Lah Processing Unit at Bundu, Ranchi, Jharkhand
2023_JIIDC_72987_1
JIIDCO/08/2023-24
Open Tender
Civil Works
Item Rate
90 days
BUNDU
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,900
JIIDCO
₹1.2 L
21 Jul 2023
3 Jul 2023
11 Jul 2023
3 Jul 2023
10 Jul 2023
3 Jul 2023
Amount
Providing coarse clean Sand filling in foundation trenches or plinth including ramming & watering in layers not exceeding
Providing designation 75B one brick flat soling joint filled with local sand including cost of watering taxes royalty all complete as per
Providing P.C.C M-150 with nominal mix (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm graded and clean coarse sand of FM 2.5 to 3 including screening shuttering mixing cement concrete in cement mixer & placing in position , vibrating, striking, curing. royalty and taxes all complete job as per building specification and direction of E/I.
Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I.
Reinforced cement concrete work in beams, suspended floor, roofs having slope up to 15'' landing, balconies, shelver, chajjas , lintels, bands, plan window sills, staircases and spiral stair case above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in wall (any thickness),including attached pilasters,buttresses,plinth and string course,fillets,Coloumns,pillars,piers,abutments,post and struts etc. above plinth level upto floor level,excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 I1 cement:1.5 coarse sand(zone-III),:3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting,propping etc. and removal of form for Lintel.Beams,Plinth Beams,Girders,Bressumers and Cantilevers.
Wheather Shed,Chujjas,Corbels etc. including edges
Columns,Pillars,Piers,Abutments,Posts and Struts
Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of urst placing the rods in position all complete as per building specification and direction of E/I.
Providing 12 mm Thk. cement plaster(1:6) on walls with clean coarse sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I
Providing two coats snow cem coats over new surface with approved quality of lime including cost of cleaning surface thoroughyy ad removing the scales of smoke and moss marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/I.
Supplying, fitting & fixing M.S. grill made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
Supplying and fixing rolling shutter of approved made of required size m.s. laths,interlocking together trough their intire length and jointed together at the end by end locks,mounted on specially designed outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength comforming to IS:4454 Part-I and M.S. top cover of required thickness for rolling shutters.
Galvanished wire mesh of average with of aperture of 1.4 mm and nominal dia of wire 0.63 mm
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly,scaffolding and taxes, all complete as per building specification and direction of E/I.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and Is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top.... Anodised aluminium
Providing and fixing glazaing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket With float glass panes of 4.0mm thickness
Structural steel work riveted bolted or weldedin built up section,truss and fixed framed work ,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet Roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Grid-7 to 11 Ridge
Providing and fixing precoated galvanised steel sheet Roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Grid-7-11-Gutter
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes 110 mm Rain water pipe
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler - 110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend - 110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe - 110
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm
Carrage of Materials Bricks Lead = 7.+1 km
Sand lead = 10 km
Stone chips lead = 10 km
Labour Cess @ 1%
M/S RAJ CONSTRUCTION
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .