REPAIR TO WALL PANELLING, ROOF SHHET, FALSE CEILING, WOODEN FLOORING ETC TO CERTAIN BLDG AT UPPER AREA OF NIMU MIL STN UNDER AGE (I) NIMU

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275..complete and all as specified and directed.

All as per item No 02 here-in-before but plain Galvanised, mild steel sheeting in ridges, hips, valley gutters complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

All as per item No 04 here-in-before but plain PPGI sheet

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A'.all as specified and directed.

M&L applying two coat of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed

M&L applying two coat of synthetic enamel painting to new surface steel based over a coat of red oxide primer exc. 10 cm width/grith including Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc all as specified and directed.

M&L applying two coat of synthetic enamel painting to old surfaces steel based exc. 10 cm width/girth including preparation of surfaces all as specified and directed

Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls complete all as specified and directed.

All as per item No 12 here-in-before but in ceiling complete all as specified and directed.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work

M & L Plain fillets. exc. 13 and n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.all as specified and directed.

All as per item No 15 here in before but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading all as specified and directed.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement all as specified and directed by Engr-in-charge.

M&L for Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and fair without using extra cement complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coat OBD on walls complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L preparing old plastered surfaces of walls and applying single coats of white wash on walls complete all as specified and directed.

M&L preparing old plastered surfaces of walls and applying single coat OBD on walls complete all as specified and directed.

M&L preparing old plastered surfaces of walls and applying single coat of cement base paint complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in charge.

M&LProviding and laying Laminate wooden flooring (Grade AC3 or AC3+ laminates) 6 mm to 12 mm thick, having core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer. complete all as specified and directed by Engr-in-charge..

M/S SONAM NAMGIAL (BID ID -3428123)

M/S TSERING ANGCHOK (BID ID -3428215)

M/S SONAM angchok (BID ID -3428250)

M/S NANCY ENTERPRISES (BID ID -3428148)

M/S UNITED CONSTRUCTION CO. (BID ID -3428175)

M.S Sharma Enterprises (BID ID -3428279)