Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 CrAccepted-AOC | ₹17.1 Cr | L1 | Accepted-AOC As per decision |
| 2 | L2₹17.4 CrRejected-Finance | ₹17.4 Cr | L2 | Rejected-Finance As per decision |
| 3 | Rejected-Technical | - | - | Rejected-Technical As per decision |
Tender Value
₹17.3 Cr
EMD Value
₹17.3 L
Closing Date
2 Jan 2024, 5:00 pmClosed
Executive Engineer
Executive Engineer, Minor Distribution Division No.-7, Galudih.
CONST. OF SUB MINOR and W/C OF OL-52 THROUGH UGPL, EX. KM 112.640 OF CLMC.
2023_WRD_79107_1
WRD/MDD-7/GALUDIH/SBD-05/23-24
Open Tender
Civil Works
550 days
chakulia east singhbhum
Please refer Tender documents.
9 documents required · 9 mandatory
₹10,000
₹17.3 L
Yes
28 Feb 2024
18 Dec 2023
4 Jan 2024
18 Dec 2023
2 Jan 2024
18 Dec 2023
Amount
DI Pipe : Providing and Supplying ISI mark Centrifuggaly cast (Spun) Ductile Iron Pipes (Class K-9) of 100 mm and above all diameter for water works with socket & spigot ends confirming to IS 8329/2000 in the standard working lengths of 4.5, 5.5 & 6m suitable for classification K-7 & K-9 suitable for push-on-joint (rubber gusket D jointing) with cement mortar lining inside the pipes with outside zinc and bittuminous coating. Rates are FOR rate including Inspection & carriage upto site including Contractor profit & overhead charges etc. eccluding GST. (i) 300 mm dia pipe K-9
(ii) 350 mm dia pipe K-9
(iii) 400 mm dia pipe K-9
(iv) 450 mm dia pipe K-9
(v) 500 mm dia pipe K-9
(vi) 800 mm dia pipe K-9
Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary Jointing materials like mechanical connector i.e. thread/insert joint/quick release coupier joint/compression fitting joint or flanged joints excluding coupler/specials and taxes). HDPE Pipe of Material Grade - PE 80-PN 06(i) 110mm dia pipe
(ii) 125mm dia pipe
(iii) 140 mm dia pipe
(iv) 160 mm dia pipe
(v) 180 mm dia pipe
(vi) 200 mm dia pipe
(vii) 225 mm dia pipe
(viii) 250 mm dia pipe
(ix) 280 mm dia pipe
Earth work in excavation (As per IS. 3114/1965) for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in charge.
Earth work in excavation in ordinary rock or soft rock (where blasting is not needed) (Vide classification of soil item-C) with initial lead of 10M and lift of 1.5M including dressing making the sides in proper profile and dressing the bed in proper grad etc. all complete as per specification and direction of E/I.
Earth work in filling the trenches after laying different type and size of pipe with earth removed during excavation with in initial lead and lift complete as per specification and direction of E/I.
Providing coarse clean sand in filling in foundation trenches and all other taxes all complete as per specification and direction E/I.
Supplying labours, tools, tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA) in trenches without supplying rubber gasket and making gasket joints including providing night guard, barrier and red light to safe guard against accident all complete (Pipe to be suppllied departmentally free of cost and laying of pipes is to be done as per I.S.S.3114-1985) as per design, specification and direction of E/I. 300 mm dia pipe
350 mm dia pipe
400 mm dia pipe
450 mm dia pipe
500 mm dia pipe
800 mm dia pipe
Supplying labour and tools for laying and jointing HYSD pipe in trenches and making butt weld ,supplying heating mirror,jack etc and provide night guard barrier and red light to safe guard against ancidentas per specification and direction of E/I . 110mm dia pipe
125mm dia pipe
140 mm dia pipe
160 mm dia pipe
180 mm dia pipe
200 mm dia pipe
Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 225 mm dia pipe
250 mm dia pipe
280 mm dia pipe
Providing and supplying ISI standard D.I specials & fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S nut & bolts coated or otherwise protected from rusting and suitable for D.I pipes including ED, CST, all taxes, etc. complete as per I.S-9523 but excluding freight. [JH-DWSD-SOR- Part B - M 1027 + Inspection - 1%, Transportation 10 % & C.P. @ 10% added. Fittings 600-900mm dia
Providing double flange sluice valve (Size 50mm to 1200mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps transportation etc. all complete. 100mm
Providing double flange sluice valve confirming for IS - 2906/14846 including worn gear as per test pressure stainless steel spindle caps transportation etc all complete FOR Rate including all taxes. (Without byepass arrangement - PN-1.6)(Scour Valve) 100mm
Supplying labour and tools for fixing C.I. sluice valve in trenches with a pair of C.I. Tail piece, including making lead caulked joints and flanged joint as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and boilts confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I (Sluice valve and pieces to be supplied departmentally free of cost).100mm
Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complet. PN - 1.0 (i) 80mm
Supplying labour & tools for fixing C.I. double acting Air valve in trenches as per specification and direction of E/I. (C.I double acting Air valve to be supplied departmentally free of cost) (i) 80mm
Supplying tools and cutting road as well restoring the same as per specification and direction of E/I. i) Pucca Road cutting
ii) W.B.M. Road cutting
Dismentaling plain cement or lime concrete work including stacking servicable materials in countable stacks within 15 meter lead and sisposal of unservicable materials with all leads all complete as per direction of E/I.
Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stones chips 20 mm - 6mm size graded and clean coarse sand FM 2.5 to 3.0 including screening shuttering mixing cmenet concrete in mixer and placing in position vibrating striking curing taxes and royalty all complete as per building specification.
Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.B211 300 mm dia pipe
350 mm dia pipe
400 mm dia pipe
450 mm dia pipe
500 mm dia pipe
800 mm dia pipe
Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C or H.D.P.E. or A.C. pressure pipe upto 60metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally) 110mm dia pipe
125mm dia pipe
140 mm dia pipe
160 mm dia pipe
180 mm dia pipe
200 mm dia pipe
225 mm dia pipe
250 mm dia pipe
280 mm dia pipe
300 mm dia pipe
350 mm dia pipe
400 mm dia pipe
450 mm dia pipe
500 mm dia pipe
800 mm dia pipe
Earthwork in excavation of foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth so obtained to distance up50m and avg lift of 1.5 m including leveling ramming the foundation trenches removing roots or shurb etc as per specification & direction of E/I.
Earthwork in excavation in ordinary rock or soft rock (where blasting is not needed) (Vide classification of Soil Item-C)with initial lead of 10 m and lift of 1.5 m including dressing making the side in proper profile and dressing the bed in proper grade etc. complete as per specification & direction of E/I Initial Lift 0 to 1.5 M :-
1st lift -1.5 to 2.5 M :-
Plain/Reinforced Cement Concrete (PCC Grade M15) in Open Foundation complete as per Drawing and Technical Specifications.
Providing RCC M-200 with nominal mix of (1:1.5:3) in roof Slab (Pump House) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.
Providing precast R.C.C.M-200 with nominal mix of (1:1.5:3) of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.
Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5 % Cico or any other water proofing compound including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I.
Providing tor steel reinforcement of 8 mm dia as per approved design and drawing do all complete as per specification & direction of E/I
Providing tor steel reinforcement of 10 mm dia as per approved design and drawing do all complete as per specification & direction of E/I
Providing coarse clean sand in filling in foundation trenchesor in plinth includingrall materials, labour, royalty and taxes all complete as per building specificationand direction E/I. (Mode of measurement compacted volume)
Providing PCC M100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade-iii(50 mm to 25 mm size) clean coarse sand of FM 2.5 to 3 including sceening,shuttering mixing cement concrete in mixer and placing in position, vibrating, stricking, curing taxes and royalty all complete as per building specification and direction of Engineer in charge.
Providing 12mm. Thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providing designation 75 A brick flat soling joints filled with local sand including cost of watering taxes royalty all completeas per building specification and direction of E/I.
Providing designation 75 A brick work in CM(1:6) in foundation and plinth with approved quality of clean coarse sand of F M 2 to 2.5 including providing 10mm thick mortar joints. cost of screening materials raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I
Providing precast R.C.C 150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manualy to site and lying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.
Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M specificfation and direction of E/I. (Mode of measurement compact volume)
Carriage of Cement
Carriage of Steel
Carriage of Sand
Carriage of Stone Chips
Carriage of Bricks
5(Five) Years Expenditure for Operation and Maintenance.
Add GST @18%
Add Labour Cess @1%
RADHE CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid