Loading
Loading…
Loading…
Tender Value
₹2.3 L
EMD Value
₹4,650
Closing Date
27 Jun 2026, 2:00 pm
EXECUTIVE ENGINEER (W/S) , GRWW
OFFICE OF THE EXECUTIVE ENGINEER (WATER SUPPLY) GARDEN REACH WATER WORKS, BIDHANGARH, KOL-66
FABRICATION AND ERECTION OF MS STRUCTURAL SHED AT THE RESERVOIR CENTRE OF 25 MGD WTP OF GARDEN REACH WATER WORKS WITH ANCILLARY WORKS.
2026_KMC_1027443_1
EE/GRWW/PH-V/02/26-27
Open Tender
MECHANICAL
10 days
GARDEN REACH WATER WORKS
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹4,650
11 Jun 2026
11 Jun 2026
29 Jun 2026
11 Jun 2026
27 Jun 2026
11 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | SUPPLY OF M.S ANGAL I.S.A AS PER IS : 2062 -2011/LATEST
REVISION, MAKE : SAIL/TATA/JINDAL UPTO 100X100 X
DIFFERENT THICKNESS | - | KILOGRAM | 54.6 | - | item1 |
| 2 | I.S.M.B AS PER IS: 2062-2011/LATEST REVISION, MAKE:SAIL/TATA/JINDAL
A) UPTO 200 X 100SUPPLY OF M.S CHANNEL I.S.M.C AS PER IS : 2062 -2011/LATEST REVISION, MAKE : SAIL/TATA/JINDAL UPTO
200X75 | 0.64 | KILOGRAM | 60.38 | ₹38.64 | item2 |
| 3 | SUPPLY OF M.S PLATE AS PER IS : 2062 -2011/LATEST
REVISION, MAKE : SAIL/TATA/JINDAL ABOVE2MM UPTO 10MM
THICKNESS. | 1 | KILOGRAM | 73 | ₹72.93 | item3 |
| 4 | Galvanised corrugated iron sheet work (excluding the supporting
frame work) fitted and fixed with 10 mm. dia J or
L hook-bolts, limpet and bitumen washers and putty complete with
150 mm. end lap and one corrugation minimum side lap. (Payment to
be made on area of finished work)(GCI sheet to be supplied by
contractor) (i) In Roof:- c) With 0.80 mm thick sheet | - | SQUARE METER | 806 | - | item4 |
| 5 | Galvanised iron sheet ridging fitted with necessary bolts,screws,
washers etc complete.(225mm end lapping) (A) 300 mm lapping each
way (c) With 0.80 mm sheet | - | METER | 449 | - | item4 |
| 6 | Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface) | 0.9 | SQUARE CENTIMETER | 8 | ₹7.2 | item4 |
| 7 | Welding in M.S.structural work with gas or electric: (a) Tack weld | 497 | POINT | 9 | ₹4,473 | item9 |
| 8 | Welding in M.S.structural work with gas or electric: (b) Continuous weld | - | PER CM RUNNING | 9 | - | item4 |
| 9 | Application of two coats of Epoxy primer as per BS 5493 by brush on the cleaned dry concrete surface with epoxy resin primer with reactive suitable hardener mixture as per specification and direction of EIC all complete. [This
item will be operated on prior permission from the concerned SE/Dy
Chief Engineer] | 1 | SQUARE METER | 396 | ₹395.6 | item4 |
| 10 | Coating of 'Epoxy Resin of thickness not less than 160 micron with a lowviscosity,crystallization-resistant epoxy resin base with a reactive diluents combined with high build epoxy amine adducts as per BS 5493 standard and a polyamide or amido polyamine or any other suitable hardener. It shall react with epoxy resin at normal ambient temperature, suitable for solvent-free coatings as per recommended proportion for use on metal, concrete and wood surface to protect from corrosion as well as damagefrom chemical reaction after making the surface free from dust, oil and moisture etc. all complete as per instruction and to the satisfaction of EIC. [This item will be operated on prior permission from the concerned SE/Dy Chief Engineer] | 1 | SQUARE METER | 449 | ₹448.55 | item6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
tbid02.pdf
Tender Documents • 0.71 MB
oid02.pdf
Tender Documents • 0.39 MB
BOQ_2523869.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
