Repair of Distribution System for Pojewal Distributory No.1 off taking at R.D. 2150 m. of Pojewal Lift Irrigation Scheme off take at R.D. 112.526 KM L/S of Kandi Canal StagE II(Outlet RD 9800 Mtr.)

Amount

WATER SUPPLY

(2) Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

((a)) Earth work upto 1.5 m. Depth for

(ii) For Ordinary soil having gravel upto 40%

(10) Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete.

(d) 200 mm dia.

(e) 250 mm dia.

BRICK WORK

(11.7) First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Supply and fixing of Socketed 200 mm dia. uPVC pipe 2.5 kg/cm2 pressure ISI mark confirming to ISI 4985 (Premium make such as Supreme/Finolex/Jain etc)

Supply and fixing of Socketed 225 mm dia. uPVC pipe 2.5 kg/cm2 pressure ISI mark confirming to ISI 4985 (Premium make such as Supreme/Finolex/Jain etc).

Providing & Fixing CI/DI Flange end, stem of SS (AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and insertion sheet, all carriage complete (with the approval of Engineer-In-Charge) (PN 1.6). (For 200 mm i/d sluice valves flanged)

Providing & Fixing CI/DI Flange end, stem of SS (AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and insertion sheet, all carriage complete (with the approval of Engineer-In-Charge) (PN 1.6). (For 250 mm i/d sluice valves flanged)

Supply and fixing Alpha valve 200 mm dia. including carriage, re-handling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

Supply and fixing Alpha valve 225 mm dia. including carriage, re-handling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.

PLASTERING & POINTING

(15.9) 12.5 mm thick cement plaster 1:4

CONCRETE

(10.13) 1:2:4 Cement concrete

(a) With shingle stone ballast or

(i) mixing by manual means

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works where not including in the complete rate of RCC including bending placing in position complete

Providing & fixing 200 mm dia. uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing 225 mm dia. uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Supply of uPVC equal-Tee of 6 kg/cm2 pressure for 200 x 200 x 200 mm conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC equal-Tee of 6 kg/cm2 pressure for 225 x 225 x 225 mm conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of uPVC reducers/increase of 6 kg/cm2 pressure for 250 x 200 mm conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of UPVC reducers/increase of 6 kg/cm2 pressure for 250 x 200 mm conforming to IS-codes with latest amendments if any at site of work.

Supply fixing flange tail end point with CI flange for 200 x 6 kg mm including carriage rehandling loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply fixing flange tail end point with CI flange for 250 x 6 kg mm including carriage rehandling, loading and unloading, testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge.

Supply and fixing socket 200 mm Dia including cariage , re-handling loading unloading, testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge.

Supply and fixing socket 225 mm Dia including cariage , re-handling loading unloading ,testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge

Supply and fixing air-vent valve single large orifice (PN-1.6) screwed type air-vent having valve size 80 mm including male threaded adaptor including carriage, re handling, loading, unloading, testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge (225 mm Dia.) .

Construction of masonry sluice valve/scoure valve chamber complete in all respects as per standared drawing size 0.9 m x0.9 m

Construction of masonry sluice valve/scoure valve chamber complete in all respects as per standard drawing size 0.6 m x0.6 m

Any other item

NEM KUMAR BANSAL CONTRACTOR