WBPWD/SEWEC /BED /NIQ-13 /2025-26

Amount

Internal Electrical Works and Compound illumination

Supplying and fixing 415V, 100 Amp TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. With 2 No cable end Box. (L&T/ Siemens)

Supply and fixing of 3nos. 100A Porcelain type kit-kat fuse and 1 no. neutral link in suitable size(2'x1.5') wooden Board or Ply Wood .

Supplying and fixing 415V, 125A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc(Make L&T/Havells)

Supplying and fixing double door 4 way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection withsuitable size of copper wire and neutral link & provision for earthing attachment (Legrand/ Siemens/L&T/ABB)

Supplying and fixing 415 V 100 A Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (Legrand/ Siemens/L&T/ABB)

Supplying and fixing double door Horizontal TPN MCB Distribution boardLegrand/ Siemens) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 6way(Legrand/ Siemens/L&T/ABB)

Supplying and fixing double-door 2+12 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment . (Legrand/ Siemens/L&T/ABB)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.(Legrand/ Siemens)

63 A FP Isolator

40A DP Isolator

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection(Legrand/ Siemens)

63A TP MCB

6-32 A SP MCB

S & Delivery of following size of 1.1 Kv grade XLPE/PVC armoured Al cable.(Polycab/Glostar /Havells ) OEM Test Certificate should be submitted before drawing of bills.

4 core x 70 sq. mm. (Meter-M/S-C/O-VTPN)

4 core x 35 sq. mm.(VTPN to HTPN)

2 core x 10 sq mm(Compound Light)

Laying on Wall / surface with Saddles / clamps

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying of following size of cable through underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. (F-2 4 core x 35 sq. mm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable. (F-4)

4 core x 70 sq. mm.

4 core x 35 sq. mm.

2 core x 10 sq mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (F-5/b)

4 core x 70 sq mm

4 core x 35 sq mm

2 core x 10 sq mm

Supplying & fixing 50mm dia medium gauge GI Pipe( ISI-Medium) for Protection with necessary fittings and jointing metarials as required.(F-6/11)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish (E-9/2)

Average run 10 mtr

Average run 8 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to originalfinish On Board

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles (E-3/6) 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (Finolex/Polycab/ KEI). (E-9/C-1) 2x 2.5 sqmm + 1x 1.5 sqmm.(Computer Board & Power Board)

3x1.5 sq mm(Separate Plug & Excess Wiring)

2x6 sqmm+1x4 sqmm(PBDB to SPNDB)

2x4 sqmm+1x2.5 sqmm(For AC Point)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type coppersockets and insulated tapes etc., including supplying sockets, tapes.(F-5/9) 2.5 sqmm.

Supply & Fixing 240 V, 2 X 6A, plug socket with separate 2 X 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F Suitable MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(for separate 6 amp.)

Supply & Fixing 240 V,2 X 20A, plug socket with separate 2 X 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F Suitable MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(for P.P).

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(E-6/26)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Legrand/ Crabtree), on S&F 2 Module GI Modular type switch board flushed in wall incl. making necy. connections as per GS.(E-17/5a)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and S&F 4 Module GI Modular type switch board flushed in wall incl. necy. connection as per GS.(E-19/17)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.(e-17/5b)

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall as per GS.240 mm x 200 mm x 65 mm

150mm x 100mm x65mm

100mm x 100 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws.240 mm x 200 mm x 65 mm

150mm x 100mm x65mm

100mm x 100 mm x 65 mm

Supply and delivery of Twin LED Fitting (Roboust Industrial Type suitable for surface, wall & conduit mounting, 22SWG Powder Coated, Screwed Down Cover) with all accessories and 2 nos PC Body LED Tube (2 X 20/18Watt, 230VAC, 50hZ, 2100 Lm, Colour Temp. 6500K, THD<10%, bult in 2.5KV SPD) (Mk, Philips, Fitting Cat No. TMC 501P 2xT-LED 22W P3242, Lamp Cat No. Mas LED Tube 18W 2100 Lm 865 T8 (VE) / eqv. CGL / Jaquar / Wipro or as per direction of EIC) (OEM Test Certificate/3 years Warranty Certificate should be provided)

Supply and delivery of Single LED Fitting (Roboust Industrial Type suitable for surface, wall & conduit mounting, 22SWG Powder Coated, Screwed Down Cover) with all accessories and 1 no. PC Body LED Tube (1 X 20/18Watt, 230VAC, 50hZ, 2100 Lm, Colour Temp. 6500K, THD<10%, bult in 2.5KV SPD) (Mk, Philips, Fitting Cat No. TMC 501P 1xT-LED 22W P3242, Lamp Cat No. Mas LED Tube 18W 2100 Lm 865 T8 (VE) / eqv. CGL / Jaquar / Wipro or as per direction of EIC) (OEM Test Certificate/3 year Warranty Certificate should be provided)

Fixing only Single/ twin Tube light with fitting complete with all accessories suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp as per G.S.(C-2/17)

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required(C-2/14d)

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. fan clam on ceiling as per approved spec., fabricated from 40 mm x 9 mm MS flat as per G.S.(D-14,31)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.(e-6/18a)

Supply & Delivery of 230V, 1 Star rated 48" (1200mm dia) ceiling fans complete with all accessories with safety wire & S3 Capacitor (Make - Crompton, HS PLUS / Orient, Summer King / Usha, Striker or as per direction of EIC) (2 years Warranty Ceritifate should be provided)

Supplying and fixing of 9"(13 cm) exhaust fan with blades & others accessories. (E.P.C. / Orient / Usha make)

S&Fixing louver shutter/cowl on wall for 9"(13 cm) exhaust fan with necy. bolts & nuts as per GS.

S & Fixing 9 w LED bulb incl. batten holder(Philips /CG/Magik)

S&F 230 V. 6 W. LED Bulk head light fittings on wall incl. necy. connection as per GS. (Philips- WT 202 /CG/LBH-10 CDL/Havells). With 3 years Warrenty

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

S&F 230 V, 32 A. front handle type Change over switch with sheet steel enclosure on wall with nuts bolts etc incl. necy. Connection as per GS. (L&T / Siemens/HPL/HAVELLS/ STANDARD)

Fixing only outdoor / street light type fluorescent light fitting or MVlight fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes /providing clampingarrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bendS&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Timer DB :- S&F timer box(2+8 way SPN DB) consisting with 1 no. 220 V. 20 A. DP MCB, 2 nos. 220V ,50Hz Power contactor MNX 25 , 1 no. toggle switch, 1 no. timer clock, 1 no. starter for mannual operation, Inditating lamps, connectors etc. incl. suitable size of interconnecting wire as reqd. as per GS.

S&D of 240V, minimum 35 watt or higher, LED Street Light including IP65 protection with CCT ( 5700-6500) & minimum Luminious efficacy>= 110 Lumen/ Watt. (Make : Phillips BRP030 LED 35 CW MR PSU GR DX/ or equivalent make from Crompton/Bajaj/Havells) NS.With 5 years Warrenty

Supplying & Fixing 200x150x100 mm GI aterproof type looping cable box on pole having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator as per GS. incl. necy. Connection & painting with anticorrosive paint as per GS

Earthing - Excavation of soil for installation of Earth Electrode and filling & ramming. - Soft soil.(G-1/1a)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GIpipe.(G-1/2)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar as per GS.(g-2/4a)

Connecting the equipments to earth busbar incl. S & F 10 SWG GI (Hot Dip) wire on wall/floor as per G.S.(G-2 /5)

SITC of Lightning Arrester

S&F Lightning Conductor Air Terminal made of 15 mm dia 1500 mm long Gi pipe (ISI medsium) having five discharge prongs of 4 SWG GI (Hot dip) wire at top duly soldered with 7/16 strandede GI (hot dip) wire and 85 mm dia 6mm thick Gi base plate at bottom including necy. hole etc. complete duly grouted on the parapet etc. in CC Mortar 4:2:1

S& F GI hot dip strip 20mmX3mm thick for horizontal run on the parapet or roof or wall with Gi Saddles 1100mm apart incl. mending good the damages to building works

S& F GI hot dip strip 20mmX3mm thick for vertical run on thewall with GI saddles spaced not exceeding 1100mm apart incl. mending good the damages to building works

Making soldered joints between conductors,conductors and air terminals for 4 SWG GI (Hot dip) wire incl. supply of jointing materials and painting with 2(two) coats of bituminous paint

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run (2 storey building 04 nos. earthing)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below By TATA-Medium GI pipe (4 nos for LC )

Supplying & fixing 32 mm dia medium gauge GI pipe (ISI - medium)protection with necy. Fittings and jointing materials as reqiuired

Extra for providing masonary enclosure on the top of the earth electrode of overall size 86.36cmX86.36cmX46cm deep(below ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement morter (inside)CI hinged inspection cover of size 36.56cmX35.56cm with locking arrangement ,GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supply& fixing of testing joints by 20mmX3mm thick GI(Hot Dip)strip 125mm long grouted on wall having clearance of 6 mm from wall for making connection with thimble at the end of 7/10 SWG GI (Hot Dip) stranded wire and 4 SWG GI (Hot Dip)wire of vertical conductor and conductor from earth electrode complete withy S&F thimbles,GI bolts,nuts,check nuts ,spring washers etc. as required

SITC Of 3KVA Online UPS

a) 3 KVA 1 PH In & - 1 ph out put true on fline UPS system in PRS configuration with DSP Based technology .along with SMF batery protection, MS rack , interlinks, and DC cable uoto 5 mtr from UPS to batteries .Make-Numeric/APC/Switching AVO, Model-Approved by ELC with 60 mins Battery backup'. (For USG) Configaration of UPS given below

Technology: True Online Double Conversation (VFI –SS-III)

INPUT

Nominal Voltage 230 VAC 1Ph +N+PE

Operating Voltage Range 180 – 250

Operating Frequency Range 45-55 Hz

Power Factor ≥ 0.99

Bypass Frequency Range ± 10%

Harmonic distortion (THDi) ≤ 5% at rated load

OUTPUT

Output Voltage 180/200/230 Vac 1Ph +N+PE

Power Factor 0.9

Voltage Regulation ± 1% (balanced load)

Frequency (Online Mode) 50Hz ± 10% (with sync mode & adjustable)

Frequency (Battery Mode) 50Hz ± 0.1 Hz

Harmonic distortion (THDv) ≤ 2% with Linear Load ≤ 5% with Non-linear load

Cold Start available

Overload ≤ 110% for 60 min ≤ 125% for 10min ≤150% for 60 Sec

Efficiency 94%

BATTERY

Battery type Sealed Lead Acid Maintenance Free

Battery back up ( For 1 hr) ≥ 4680VAH(12x65x6nos)

COMMUNICATION

Standard LCD Display, LED Indication, RS232 port, RS485 port, Dry Contact

Optional SNMP Card, Relay Card BMS Card

ENVIRONMENT

Operating Temperature for UPS 0 degree C – 40 degree C

Relative Humidity Range 0-95 % (non-condensing)

Noise Level < 70dB

SITC of 1.5/2 TR Single Phase RAC Machines

Supply, Installation, Testing & Commissioning of Inverter type split AC machine (a set of full metal body indoor and outdoor unit), having Cooling Capacity range (6.6 KW - 7.0 KW), with variable speed compatible rotary compressor, refrigerant gas R 32 / R 410A, (ISEER range 3.8 to 4.39 or higher), Air flow range CFM (780 - 850), both condenser and cooling coils made of copper tube, with P2 type capacitor, connecting chord with plug top, confirming to IS 1391 (Part-I & Part-II) with all amendments. Noise level not more than 52 db., suitable for 1 Ph. 230V, 50 Hz. power supply. (Make - Mitsubishi Electric/ O General/ Mitsubishi Heavy)

Supply, Installation, Testing & Commissioning of Inverter type split AC machine (a set of full metal body indoor and outdoor unit), having Cooling Capacity range (5.2 KW - 5.3 KW), with variable speed compatible rotary compressor, refrigerant gas R32/ R410A, (ISEER range 3.8 to 4.39 or higher), Air flow range CFM (560 - 600), both condenser and cooling coils made of copper tube, with P2 type capacitor, connecting chord with plug top, confirming to IS 1391 (Part-I & Part-II) with all amendments. Noise level not more than 52 db., suitable for 1 Ph. 230V, 50 Hz. power supply. (Make -Mitsubishi Electric/ O General/ Mitsubishi Heavy)

Installation of 1.5 Ton & 2 Ton capacity Split type AC m/c incl S&F MS Bracket & allied accessories incl making holes and mending good the damages etc.

Supply & Installation of HVAC grade 5/8"(Gas Line) & 1/4"(Liquid Line) copper pipes between ODU and IDU(Make: Ryoku/Nippon) including shaddle,screw, insulation tape, fastner etc.as per direction of EIC.

Supply & Laying heavy type PVC pipe for water drainage.

S/L of 4 core 4 sq.mm 1.1 KV grade sheathed Cu cable with gas line as per direction of EIC for Indoor to Outdoor Communication for Split type AC m/c.

SITC of LED Glow Sign Board

Sign Board : Supply & Installation of 8" depth box type M.S. structure duly fabricated & welded by 40 mm x 40 mm M.S. square pipe 3 mm thick ISI mark frame with back side & four sides covered by 24SWG M.S. sheet including Aluminum channel and fixing arrangement with ACP sheet including painting. size : 16' x 4' to be made such a manner that it can be opened towards up direction for taking maintenance. S&F 4 mm thick "Blue" Colour ACP sheet on MS structure. Size 16 ft. X 4 ft.---1 NO Supply fixing of LED inside the acrylic letters. The specification of the LED is given below : A) LED: White- Samsung SMD 5630 (Korea) module: B) Type: Double line fixed C) Life: 70,000 burning hours D) Intensity: Same & smooth throughtout, no brighter or light or dark patches. E) Visibility: 50 mtr. at least for normal eye. F) Power supply: Required AMP (meanwell LRS-<...>-12) G) Ambient Air: 0-50C.100% relative humidity. H) Power Consumption: 1.08 watt per module.

Supply & Fixing of special type imported acrylic letter required height fixed on ACP sheet. The letter font Letter colour = White. Encrypted with : "Ashoka Emblem on Top 1st Row: GOVERNMENT OF WEST BENGAL 2ND Row: DEPARTMENT OF ANIMAL RESOURCE DEVELOPMENT 3rd Row: OFFICE OF THE BLOCK LIVESTOCK DEVELOPMENT OFFICER 4th Row: KALNA-I, PURBA BARDHAMAN 5th Row: AND 6TH Row: BLOCK ANIMAL HEALTH CENTER 7th Row: LICHUTALA KALNA-I PURBA BARDHAMAN " NB. AS PER REQUIREMENT & APPROVAL FROM AUTHORITY END. S & F water proof 750 watt power supply system IP65, 50/60Hz frequency, 108 to 305 V AC powersupply, >.095 power factor for LED lamp. (Make : Meanwell / Groen / Impex) - 2 Nos. This is including of S&F 50 mm x 50 mm x 6 mm MS angle iron structure grounting on wall including painting for fixing of sign board.

Supplying and fixing double door Horizontal TPN MCB Distribution boardLegrand/ Siemens) with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 6way(Legrand/ Siemens/L&T/ABB)

Supplying and fixing double-door 2+12 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment . (Legrand/ Siemens/L&T/ABB)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.(Legrand/ Siemens/L&T/ABB)

63 A FP Isolator

40A DP Isolator

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection(Legrand/ Siemens/L&T/ABB)

6-32 A SP MCB

S & Delivery of following size of 1.1 Kv grade XLPE/PVC armoured Al cable.(Polycab/Glostar /Havells )

4 core x 35 sq. mm.

2 core x 10 sq mm(Compound Light)

Laying on Wall / surface with Saddles / clamps

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable. (F-4)

4 core x 35 sq. mm.

2 core x 10 sq mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (F-5/b)

4 core x 35 sq mm

2 core x 10 sq mm

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 10 Mtr as per gs E-15/5

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type coppersockets and insulated tapes etc., including supplying sockets, tapes.(F-5/9) 2.5 sqmm.

Supply & Fixing 240 V, 2 X 6A, plug socket with separate 2 X 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F Suitable MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(for separate 6 amp.)

Supply & Fixing 240 V,2 X 20A, plug socket with separate 2 X 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F Suitable MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.(for P.P).

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(E-6/26)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Legrand/ Crabtree), on S&F 2 Module GI Modular type switch board flushed in wall incl. making necy. connections as per GS.(E-17/5a)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and S&F 4 Module GI Modular type switch board flushed in wall incl. necy. connection as per GS.(E-19/17)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.(e-17/5b)

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall as per GS.240 mm x 200 mm x 65 mm

150mm x 100mm x65mm

100mm x 100 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws.240 mm x 200 mm x 65 mm

150mm x 100mm x65mm

100mm x 100 mm x 65 mm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Supply and delivery of Twin LED Fitting (Roboust Industrial Type suitable for surface, wall & conduit mounting, 22SWG Powder Coated, Screwed Down Cover) with all accessories and 2 nos PC Body LED Tube (2 X 20/18Watt, 230VAC, 50hZ, 2100 Lm, Colour Temp. 6500K, THD<10%, bult in 2.5KV SPD) (Mk, Philips, Fitting Cat No. TMC 501P 2xT-LED 22W P3242, Lamp Cat No. Mas LED Tube 18W 2100 Lm 865 T8 (VE) / eqv. CGL / Jaquar / Wipro or as per direction of EIC) (OEM Test Certificate/Warranty Certificate should be provided) (With 3 Yeras Warrenty )

Supply and delivery of Single LED Fitting (Roboust Industrial Type suitable for surface, wall & conduit mounting, 22SWG Powder Coated, Screwed Down Cover) with all accessories and 1 no. PC Body LED Tube (1 X 20/18Watt, 230VAC, 50hZ, 2100 Lm, Colour Temp. 6500K, THD<10%, bult in 2.5KV SPD) (Mk, Philips, Fitting Cat No. TMC 501P 1xT-LED 22W P3242, Lamp Cat No. Mas LED Tube 18W 2100 Lm 865 T8 (VE) / eqv. CGL / Jaquar / Wipro or as per direction of EIC) (OEM Test Certificate/(With 3 Yeras Warrenty )

Fixing only Single/ twin Tube light with fitting complete with all accessories suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp as per G.S.(C-2/17)

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required(C-2/14d)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.(e-6/18a)

Supply & Delivery of 230V, 1 Star rated 48" (1200mm dia) ceiling fans complete with all accessories with safety wire & S3 Capacitor (Make - Crompton, HS PLUS / Orient, Summer King / Usha, Striker or as per direction of EIC) (2 yers Warranty Ceritifate should be provided)

Supplying and fixing of 9"(13 cm) exhaust fan with blades & others accessories. (E.P.C. / Orient / Usha make)

S&Fixing louver shutter/cowl on wall for 9"(13 cm) exhaust fan with necy. bolts & nuts as per GS.

S & Fixing 9 w LED bulb incl. batten holder(Philips /CG/Magik)

Earthing - Excavation of soil for installation of Earth Electrode and filling & ramming. - Soft soil.(G-1/1a)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GIpipe.(G-1/2)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar as per GS.(g-2/4a)

Connecting the equipments to earth busbar incl. S & F 10 SWG GI (Hot Dip) wire on wall/floor as per G.S.(G-2 /5)

A.D.B.S (BID ID -6537772)

S.S. ELECTRICAL ENTERPRISE (BID ID -6562516)

GHOSH ENTERPRISE (BID ID -6573626)