SPECIAL REPAIR TO BLDG NO P-315 (4 X OFFRS MD ACCN) VIKRAM BATRA ENCLAVE AND SPECIAL REPAIR TO ROOF, CEILING AND MISC WORK IN BLDG NO T-462 AT OFFRS INSTITURE OF HQ MB AREA UNDE GE (WEST) JABALPUR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM (1:6), finished even and smooth without using extra cement,complete all as specified and directed

Material and labour for rendering 15mm thick (in two layers 10mm & 5mm) cement plalster in CM 1:4 over brick wall / concrete external surfaces, second layer mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid for separately as "supply only".

M&L for 15 mm thick rendering in CM (1:6) on fair faces of brick /concrete surfaces including finishing even and smooth (without using extra cement ) complete all as specified and as directed.

M&L for 5mm thick rendering on concrete surface of ceiling in CM (1:3), finished even and smooth with out using extra cement complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness including part chipping (below or above ground level) complete and removing debris from the premises all as specified and as directed..

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

M&L PCC(1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete as sub base of floor complete all as specified and as directed.

Taking down old roof treatment of any description from roof of buildings upto Four storeyed including removing of old plaster, PCC, APP membrane and any other type roof treatment and cleaning of surfaces of old concrete floor/ terrace by picking including taking down existing deteriorated / decayed tarfelt, PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. complete at upto four storey and removing rubbish off the premises complete all as specified and directed.

M&L for 10 mm thick plaster in CM (1:3) mixed with water proofing compound @ 200ml per 50 kg of cement on concrete roof surface to maintain the proper slope of roof surface etc upto and including Four Storey complete all as specified and directed. (Note : Liquid WPC will be measured and paid for separetely as "supply only")

M&L for Providing water proofing treatment with super thermo APP modified water proofing membrane in roof upto Four Storeyed building by applying two coat of bituminous base Aluminium paint @ 0.20Ltr/Sqm over One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non woven fabric shall be laid in roof surfaces with lap of 100 mm and the over lap shall be sealed by flame laid over one coat of industrial bitumen 85/25 @ 1.20Kg per Sqm over water base bituminous primer @ 0.40 Ltr/Sqm over cleaned plastered surface at upto Four storey building complete all as specified and as directed..

Taking up or down, 15 mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed

Taking up or down, 20 mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed

Taking up or down, 25 mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (20mm graded aggregate)as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,Hold fast and similar works water troughs and the like including weathering, slightly rounded for chamfered angles and necessary formwork all as specified and as directed

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and directed

Taking down chowkats and frame n.exc 1.5 Sqm each (Door / window / Ventilator ) including shutters without taking off shutters from the frame and removing from site complete all as specified and directed

Taking down shutter of any description n.exc 1 sqm each and removing to store complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site.

Taking down shutters of any description n.exc 1.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) to fill the frame & making good the disturbed surface complete all as specified & directed.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) to fill the frame & making good the disturbed surface complete all as specified & directed.

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face sunmica with lipping/frame to match as in cupboard door shutters complete all as specified and directed.

S & F 30 mm thick flush door shutter, solid core construction with block board core and ply wood face panels commercial type on both side complete all as sapecified and directed.

S & F Factory made internal PVC door frame of size 50x47mm single riveted made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed.

S & F Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as specified and as directed .

M&L for anodized aluminium powder coated (minimum thickness of powder coating 50 micron) three track sliding window (02 glass track and one wiremesh ) , frame side top and sides of size 92x31.75x1.5 mm (Section No. 20831), bottom size 92x31.75x1.5 mm (Section No. 20832) and shutter top and bottom size 40x18x1.55 mm (Section No. 20736) and sides (handle) of size 40x18x1.55 mm (Section No. 20738) and lock side shutter frame of size 40x18x1.55 mm (Section No. 20737) including rubber gasket, beading and locking arrangement including making good the disturbed portion complete including stainless steel wire staples and including fixing 5 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good the disturbed portion complete all as specified and directed. ( Note : Glazing is deemed to be included in the quoted rate of contractor . )

M&L for anodized aluminium powder coated(minimum thickness of powder coating 50 micron) ventilator louvers type, frame top and bottom of size 31x42x1.6 mm, rectangular tube of size 40x20x2 mm and middle vertical of size 42x46.20x1.6 mm and clip for fixing in wiremesh and glass of size 19x17.30x0.90 mm including rubber gasket, beading and locking arrangement including making good the disturbed portion complete including stainless steel wire staples and including fixing 5 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good the disturbed portion complete all as specified and directed. ( Note : Glazing is deemed to be included in the quoted rate of contractor. )

S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) door with frame top and sides of size 83.50x44.45x1.62mm ( Section No 19549), and shutter top rail and stile of size 92x38x1.70 mm ( Section No 21339) and Lock and bottom rail of size 125x37x1.80 mm ( Section No 19634) including rubber gasket, beading, anodised aluminium snap beading, screws, anodised aluminium fittings such as butt hinges/Pivot hinges 100 mm long (3 Nos.), handle (2 no.), Lock 06 Lever and locking arrangement ,fixing 5.00 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good the disturbed portion complete all as specified and directed.

S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) partition wall of size 83.50 x 44.45 x 1.62 mm including rubber gasket, beading, anodised aluminium snap beading, screws, anodised aluminium fittings ,fixing with and including 5.00 mm thick glass or ACP sheet with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good the disturbed portion all as specified and directed.

M&L for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc.(minimum thickness of powder coating 50 micron) complete all as specified and directed.

M & L for timber, 2nd class HW, plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc 13cm but n. exc 25sqcm.with white sunmica, including dismantling existing one, complete all as specified and directed.

S & F in repair 19 mm thick prelaminated particle board, prelaminated one side grade 2 quality interior grade commercial type, with white colour sunmica inner side and colour glossy sunmica outer side as in cupboards, kitchen cabinet, pelmet box and in similar works complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S & F Door Seal rubber min 80 cm length ( as per opening of door ) etc, complete all as specified

S&F mild steel, 300 mm long ordinary helical door spring including roller and roller plate complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 300 mm long mild steel stove enamelled sliding door bolts, plate type, stove enamelled black with bright bolt 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100mm long Butt hinges,medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

M&L for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L for 150 mm long aluminium anodised handles, oval type, stove enamelled black complete all as specified and directed.

M&L for 100 mm long aluminium anodised handles, oval type, stove enamelled black complete all as specified and directed.

S&F 75mm long Butt hinges,medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

M&L for 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed.

M&L for 125 mm long aluminium anodised handles, oval type, stove enamelled black complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40 mm complete all as specified and directed.

S&F in repair 50 mm size magnet catcher, cupbord lock, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Dismantling of Stone slabs and kota stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

M&L for Machine cut cudappa stone slab 20-25mm thick as in Shelf / cooking platforms, and like including cutting and fixing, laid over and including 15 mm thick cement screed base in CM (1:4) and jointed to support granite top complete all as specified and directed.

M&L for granite (zed Black) work 18 to 20 mm thick (table rubbed and polished ) as in cooking platforms, and like, laid over and including 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab complete all as specified and directed.

M&L for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 10 mm thick screed bed in CM (1:4) , as in tread and riser of staircase,steps , jambs, pillars, window- cills, complete complete as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete complete as specified and as directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete as specified and as directed.

M&L for 25 mm thick PCC(1:2:4), type B-0 using 12.5 mm graded stone aggregate as in sub base flooring, surface finished even and rough to receive the topping layer complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises all as specified and as directed..

M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 20 mm thick Cement mortar (1:4) as screed bed, complete all as specified.

M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished,exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick Cement mortar in (1:4), complete all as specified.

M&L Glazed ceramic colour tiles in vertifical surface 450x300x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including including 10mm thick renderting/ back coating in cement mortar (1:4) complete all as specified and directed.

S & F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work conforming to (Fe 290 Gde E-165) complete all as specified and directed.

S&F in repair mild steel, Framed work as in doors or gates, roof structure of any size and section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc conforming to (Fe 290 Gde E-165) to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing,including dismantling, complete all as specified.

S&F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, including dismantling, complete all as specified and directed.

S&F mild steel, Fe 410-W (Gde E- 250 quality-A) Framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F mild steel, Fe 410-W (Gde E- 250 quality-A) Rolled sections as in Post and struts, fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating(AZ- 150) GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating (AZ -150) GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ ridge to wall,valley gutter fixed with self tapping screws complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection, hard standing and similar works, complete all as specified and as directed.

M & L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate stone as in subbase of Hard standing and similar works complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per Srl item No 81 above but except brick ( Note : Serviceable bricks retrieved against dismantling shall be re-used.)

Dismantling water tanks and removing from site, capicity exc 250 ltrs but n exc 500 ltrs complete all as specified and directed

Dismantling water tanks and removing from site, capicity exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed

Disconnecting existing tanks,Capacity exc 500 ltrs and n exc 1000 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F in repair 25 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed .

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified.

M & L for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamal paint complete all as specified and directed.

M & L for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of New plastered wall surfaces and applying with and including 2 mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over chalk whitening primer complete all as specified and as directed.

M & L for complete removal of existing treament and preparation of old plastered wall surfaces and applying with and including 2mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed .

M & L preparation of New plastered ceiling surfaces and applying and with including 1 mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over chalk whitening primer complete all as specified and as directed .

M & L for complete removal of existing treament and preparation of old plastered ceiling surfaces and applying with and including 2mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over chalk whitening primer complete all as specified and as directed.

M & L for preparing new or previoussly untreated ceiling and applying three coats of white wash complete all as specified.

M & L for complete removal of existing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified.

M&L for Preparation of new wall surface or complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm / Ltr as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI(Allow 6-8 hrs to dry the surface in subsequent coats of paint) over and including 2mm thick waterproof putty complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550x400 mm including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets, complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580 mm x 440 mm white with integral foot rests including all necessary fittings complete all as specified and directed

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including all necessary fittings complete all as specified and directed

S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flushpipe,brackets complete all as specified and directed

S&F, in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes coupling including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.

S&F in repairs Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 20 mm bore of pipe complete all as specified and as directed.

S&F in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 20 mm bpre of pipe complete all as specified and as directed.

S & F in repairs CP shower rose 150 mm round with arm and flange incl fixing to steel pipe complete all as specified and as directed.

S & F in repair PVC connections 15mm dia with PTMT nut on both ends and washers 450 mm long complete all as specified and as directed.

S&F in repair Bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair,15 mm dia ,Pillar taps, cast copper alloy, fancy type,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S&F in repair towel rail 450 mm long of Brass CP fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms)

S&F in repair for stainless steel kitchen plate rack SIZE (24"X36"X10") three tire ISI marked, including all fittings all as specified and as directed.

S & F in repair of 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches,floor and wall including taking down old unserviceable pipe any description and any type complete all as specified.

S & F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or in floors and wall, 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

S & F in repairs PVC (SWR) bends 100 mm dia bore any radius with access door complete all as specified and as directed.

S & F in repairs PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and as directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair Soap dish, vitreous China white, approximate size 160 x 160 x 90mm complete all as specified and directed .

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M & L for WPT of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after clearing the surfaces thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturers instructions complete all as specified and as directed.

S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair elegant mirror PVC Cabinet of size 475 x 600 x1 50 mm complete all as specified and directed.

S&F, in repair, 5mm thick corner glass shelf 300mm with CP brackets and with decorative railing fixed to wall complete all as specified and directed.

S & F CP jet spray fitting to EWC or wall with screws and including two way CP stop cock 15mm dia complete all as specified and directed .

S&F, in repair, Health Faucet with 1.25 metre long flexible tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

S&F in Repair wall mixture three in one with complete accessories complete all as specified and directed .

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.

S&F in repair towel ring of CP fixed with and including CP brass screws and wooden / plastic cleats (min wt 90 gms) for kitchen complete all as specified and directed .

Material and labour for 60 mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-35 grade of concrete, with grey cement and pigment confirming to IS 15658-2006 over and including 50 mm thick crushed stone dust / M-sand cusioning including watering and consolidation complete all as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Demolition and breaking up 150 mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as directed.

Supply, laying and jointing 150 mm nominal bore DWC(HDPE double wall corrugated), socketed including concrete bed cement morter 1: 3: 6 type C2 to drain pipe including packing under and haunching against the sides of the pipe and sewage pipes having 6.0 M length, conforming to IS 16098 (Part-2) of SN-8 Stiffiness with and including necessary jointing matrials etc complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick with grey cement and pigment complete all as specified and directed.

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. complete all as directed.

Providing & injecting chemical emulsion for Post Constructional Anti-termite (Chlorpyrifos 20 % EC) Treatment with external wall where the apron is not provided using chemical emulsion at the rate 7.5 liters per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavation channel along the wall and rodding etc. complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatmen of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,in concrete, brick work masonary including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Dismantling chain link fencing wire mesh, any type complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as directed.

S&F Round Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified .

S & F in repair 15 mm bore brass chromium plated Sink Mixer for hot & cold water with long shank and fly nut complete all as specified and directed

Dismantling of wall and ceiling boards of any description (fibre, pulp, insulation, etc.) including cover fillets complete all as specified and directed including removing to store.

Dismantling of timber scantlings, unframed, 40Sq Cm and over in section, in any position complete all as specified and directed.

M&L for Precast cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. : .

M&L for Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L for Form work to soffit of Suspended slab such as roof slab,floor slabs landing and similar work not exceeding 200 mm thickness as directed .

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

S & F for wood grain printed colour PVC sheet 2mm thick fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete as specified and directed.

S&F for double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.

S&F for door closer hydraulically regulated designation No-2 universal type of aluminium body (extruded section) fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & weight between 36-60 kg complete all as specified and directed .

M&L for MS flat iron work conforming to Fe-290, Gde E-165, as in wind ties for roof including securing bolts, drilling holes, notching for wire etc complete all as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for 6mm thick non Asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Dismantling of roof sheet of any description (Asbestos cement corrugated / semi corrugated/ fibre glass sheet / polycarbonate etc) sheets in roof covering complete all as specified and directed.

S&F for 10mm thick Shell type High quality Poly carbonate sheet including Joining Strip of PVC or Aluminium with Rubber beading including all fixing arrangements, fixing with 40x6 GI Flat, Self tapping screw, fasteners, sticking liquid as per manufacturers instructions etc complete all as specified and directed.

Taking down of eaves gutter, rain water pipes, AC/PVC pipes of any size or pattern including all fittings etc complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Polishing the existing old kota stone flooring including preparation, grinding and polishing in floors complete all as specified and directed.

M&L for preparing new plastered surface of walls and applying a coat of primer over and including 2mm thick wall care putty complete all as specified and directed.

M&L for Complete removal existing treatment by scraping/sanding or any other method and preparation of old surfaces of walls and applying coat of Primer over and including 2mm thick wall care putty on walls complete all as specified and directed.

M&L for applying two coats of Acrylic Emulsion paint any colour on walls complete over and including a coat priming over prepared suface all as specified and directed.

M & L for preparation of new plastered wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 2mm thick water proof wall care putty complete all as specified and as directed.

M&L for Complete removal of existing treatment of any description and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over and including 2mm thick water proof wall care putty complete all as specified and as directed.

M&L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass pin head type and glazing with oil putty / wooden beads in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.

S&F 25 mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm-210 gms) complete all as specified and directed.

S&F in repair gun metal, globe or gate valve for 25 mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed .

S&F in repairs vitreous China half stall urinal flat back with Spreader, waste fittings and outlet pipe complete with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed.

S&F Stainless steel Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F, in repair 18 mm thick ply, PVC sheet with prelaminated on one side of approved texture as in Kitchen cabinet and cupboard etc (with shelves and partitions) including necessary fittings & fixtures and PVC beading on edges as per manufacturer's instructions complete all as specified and directed.

S&F in repairs Wall hung Padestal water closet with UF soft close seat cover, hinges, accessories set, size 385 X 595 X 385 mm including all fittings complete all as specified and directed.

S&F for single piece slim concealed flushing cistern with wall mounting frame , installation kit and "S-type drain pipe connection set for wall hung Water closet including all fittings complete all as specified and directed.

S&F for flush control plate for concealed flushing cistern including all fittings complete all as specified and directed.

S&F for metropole flush valves dual flow 32mm size ( concealed body) with exposed shut off provision and 100mm square plate (3.0 / 6.0 ltr per flushing ) including control cock and operating lever including all fittings complete all as specified and directed.

M & L for snap grid false ceiling system of 4mm thick designer E board exposed suspended system, grid of size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), and fixed with pre painted 4 mm thick E board of approved design and with provn for light fixture complete all as per manufacturer instructions and as directed.

S&F, in repair, chromium plated, urinal spreader complete all as specified and directed.

S & F in repair 40 mm dia UPVC waste pipe of minimum length 1 mtr for Urinal, sink and WHB etc complete.

Supply & Fixed in repairs Two way bib cock make as approved by GE) complete as specified and as directed.

S&F in repair tumbler holder as approved by GE) complete as specified and as directed.

S&F in repair Towel ring round with round flange complete as approved by GE, as specified and directed.

S&F, in repair, CP, soap dish holder(as approved by GE) complete all as specified and directed.

M&L for malamine polishing on wooden surfaces in vertical surface of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old/new works with one or more coats on old work etc complete all as specified and directed.

S&F in repair for stainless steel chromium plated single lever basin mixer including all necessary fittings comlete all as specified and directed.

S & F coloured PVC insulation panels 7-8 mm thick cell type of 1mm plain PVC sheet suitably placed in false ceiling grid made of / GI as per manucaturer intruction complete all as specified and directed Note : Rates are inclusive of necessary frame work)

S&F in repair Mortice lock,vertical type size 100 mm 4 lever suitable for aluminium door including fixing with stainless steel screw as complete all as specified and directed.

S&F in repair brass chromium plated bottle trap 32 mm bore for wash hand basin with inlet & outlet screwed for pipes or connection including necessary packing union and cap complete all as specified and directed .

Supply & Fixed for ceramic wash Basin counter top basin white colour of size 700 X 460 X200 mm including table top counter for fixing WHB of matching colour complete all as specified and directed.

S&F in repair 25mm dia Stainless steel Curtain / dropary rod cut to required length and fix in position including Fancy Nobs and 3 mm thick bracket suitable for 25mm dia Stainless Steel pipe complete all as specified and directed.

S&F in repairs for providing and fixing stainless steel (Grade SS-304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.

S&F for 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including necessary arrangements ,cutting to shape, drilling holes required including packing with rubber gasket, locking arrangement fixing with Stainless Steel bracket and Pivot complete all as specified and directed.

S&F Stainless Steel handles suitable for Glass door shutters not less than 300mm long design/Make as approved by GE (ISI Mark) complete all as specified and directed

S&F for looking mirror of size 5 feet X 3.5 feet with designer glass (5 mm thick ) and frame to be fitted with wall including all necessary arrangements (fixed with SS studs ) and fittings complete all as specified and directed.

M&L for 100mm thick moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by vibromax roller only.

M&L for ENDURA outdoor full body Vitrified tiles 30 cm x 30 cm x 10 mm thick, jointed and pointed in neat cement slurry and pointed in white cement mixed with pigment, to match as in floors etc laid over in patches and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

Internal electrification

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc complete all as specified and directed .

Taking down carefully Main switch and Distribution boards, earth plug sockets any make and size .

Taking down the ceiling fan/exhaust fan in situ and depositing it in MES store complete all as specified and directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed .

M/L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M/L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.00 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed .

One light point/Bell point controlled by one switch.

One fan point controlled by one switch.

One socket point controlled by one switch on same board.

One socket point controlled by one switch on Independent board.

Description all as per item No 225 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed.

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed .

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed.

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed.

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed.

S & F in repair modular fan regulator Step type of polycarbonate complete all as specified and directed.

Supply and fixing in repair of LED lamp rotary type/holder type of 9 watt all as specified and directed.

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 12 WATT made of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), all as specified and directed.

S & F in repair of LED Decorative /mirror light fitting 10watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed.

S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed.

Supply & fix, in replacement, LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

Supply & fix, in replacement, LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 8- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door complete all as specified and directed.

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed .

S & F in repair MCB TP 25 to 63 Amps, 240 Volts, minimum 10 KA, "B" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed :-(Make- Legrand / L&T / Havells) (Note :- Proper and suitable size cable, copper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating)

Supply and fixing Single phase ceiling fan (BLDC) 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30 watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629 m3 / min / watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet two nos bearings including connecting wire complete with all as required and directed.

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed.

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed.

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and directed.

Supply & Fixing in repair modular AC box (earth plug socket) complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed .

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.Make:Bajaj,havells or equivalent.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, made of sturdy engineering plastic complete with louvers shutters including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

S&F water heater storage type (Geyser) vertical/Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star reted, ISI marked including 04 Nos of hold fechner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and directed.

Supply and install electric chimney max 1350 m³/h powerful suction ISI mark, Push button controls with 2 energy efficient led lamps, 3-speed setting for a convenient and odour free cooking experience, Advanced baffle filter saves the hassle of frequent cleaning & maintenance with all fixing arrangemnts and exhaust pipe as required on site , all as required and directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar triple pole and neutral vertical 415 V, 4 Ways, double door type,complete all as specified and directed. With Incoming MCCB of 100 Amps Capacity .

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

S&F IN repair LED light fitting square 57x57 CM Not less than 36 watt along with fixture Recessed mounting LED luminaires with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed.

S & F in repair wall mounted fans metal body size sweep 450 mm sweep, 230 v, 50 Hz , High speed motor for higher air delivery. Pull cord control for speed & oscillation On-Off and complete with all accessories including making holes and making good the disturbed surface complete all as specified and directed.

External electrification

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 50 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed.

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythethyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc. size 50 mm outer dia and 38 mm inner dia complete all as specified and directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. (Note :- Punned thickness will be measured for payment purpose)

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with sub class ‘B’ fly ash bricks laid dry flat complete all as specified and directed.

Taking down old unserviceable cable any type any size .

Taking down old unserviceable LT Panel any size any type.

Supply, installation, testing and commissioning of LT panel, IP65/54 made of environment friendly polycarbonate PC - GFS Insulation-enclosed power distribution board as power switchgear and control gear assembly (PSC) in accordance with IEC 61439-2 for wall mounting/floor mounting. The enclosures must be suitable for outdoor installation - harsh environment and/or outdoor installation - the climatic effects on the equipment must be considered. Bottom parts and lids of the boxes made from impact-resistant polycarbonate, halogen and silicon-free, colour RAL 7035, transparent lid with quick action fasteners for tool operation. Burning behaviour according to IEC 60695-2-11 glow wire test + 960°C. Maximum water absorption 10 mg in accordance with DIN 53473. Protective measure: totally insulated (protection class II), the enclosure should have mechanical strength equivalent to IK10 (bidder should submit compliance for same for polycarbonate enclosure in OEM letter head with technical bidding) To prevent the condensation in each distribution board “dew guard” to be used in right quantity in each system. SPECS:- Incoming : 250 AMPS MCCB 4 POLE 36KA, OUTGOING:- (i) MCCB 4 POLE 200 AMPS -02 NOS, (II) MCCB 4 POLE 100 AMPS -02 NOS

Notes : 1) Drawing from Original Equipment Manufacturer ( OEM )to be got approved from Accepting Officer before supply of Panel. ( Drawing from any other agency / System house will not be accepted. 2) Panel should be manufactured in and assembled by OEM only. Fabrication / /Assembling from any other system house will not be accepted. 3) Inspection by company Engineer after installation at site is mandatory and rates deemed to be included it the overall quoted rates. 4) The bidder should submit all relevant type test certificate / compliance in OEM letter head during technical evaluation. 5) The bidder should provide warranty / guarantee format in OEM letterhead. 6) The bidder should submit Routine test certificate during order execution in OEM letter head.

Schedule of credit amount of Rs 152990.00 to be deducted during AOC.

M/S Modern builders (BID ID -3400210)

Tiki Water proofing Co (BID ID -3402277)