REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION SUBMAIN WIRING AND FITTING FIXTURE AT NIMU AND NURLA MIL STN UNDER AGE(I) NIMU

Amount

Taking down carefully circuit/ submain wiring for any description including DBs complete and all as specified and as directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with MS conduit all as specified and as directed by Engineer-in-Charge.

Supply and laying in replacement of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 4 sqmm drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws and including single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 4 sq mm as earth wire complete all as specified & directed by Engineer-in-Charge.

Supply and laying in replacement of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws and including single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire complete all as specified & directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc for One light point/one fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 05 here-in-before but for One 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size.

All as per Srl item No. 05 here-in-before but for One 3 pin 5 Amp socket outlet on same board.

All as per Srl item No. 05 here-in-before but for One bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size.

All as per Srl item No. 05 here-in-before but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable.

S&F in replacement Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed by Engineer-in-Charge.

S&F in replacement socket 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed by Engineer-in-Charge.

S&F in replacement switch piano flush type 5 Amp, single pole, one way complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Switch Bell push, flush type, 5 amp complete all as specified and directed by Engineer-in-Charge.

S&F in replacement bell ding dong, 230 V complete all as specified & directed by Engineer-in-Charge.

M&L for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge.

S&F in replacement hanging Lamp/pendent lamp/ceiling light/office light of 15 watt complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in replacement indoor LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed by Engineer-in-Charge.

S & F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all specified and directed by Engineer-in-Charge.

S&F in replacement all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as per specified and directed by Engineer-in-Charge.

Supply & fixing in replacement sheet metal powder coated versatile double door TPN distribution system fitted with two cover with copper bus bar, neutral link, earth bar and din rail suitable for use on 415 Volts, 50 Hz supply 4 way complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sheet metal powder coated versatile double door SPN distribution board, 4 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sheet metal powder coated versatile single door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz complete all as specified and directed by Engineer-in-Charge.

S&F in replacement sheet metal powder coated versatile single door SPN distribution board, 12 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 4 Pole 63 Amps with 16 KA breaking capacity complete all as specified and directed by Engineer-in-Charge.

M&L for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards complete all as specified and directed by Engineer-in-Charge.

M&L for MCB SPN 40 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards complete all as specified and directed by Engineer-in-Charge.

M&L for MCB SPN 32 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards complete all as specified and directed by Engineer-in-Charge.

S&F in replacement to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminimum conductor of size 16 Sq mm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to ed iron strip 25 x 4mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete all as specified and directed by Engineer-in-Charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 35,362.00 and any other reduction if any from quoted amount.