Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹29.9 L+₹60,506.10 (2.06%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹36.4 L+₹7.1 L (24.2%)Rejected-Finance RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L3 | Rejected-Finance Not Being Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-I AGE B/R-II AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10
2022_MES_532603_1
C-35/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹60,000
Yes
13 Aug 2022
21 Jun 2022
29 Jul 2022
21 Jun 2022
27 Jul 2022
5 Jul 2022
21 Jun 2022 - 5 Jul 2022
Amount
M&L for Surface dressing n exc 15 cm deep and site clearance complete all as specified and directed by Engr-in-Charge.
M & L for 100 mm thick cement concrete type D-2, 1:4:8 using (40 mm graded stone aggregate) as in sub base complete all as specified and directed by Engr-in-Charge.
M & L for painting new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of red oxide complete all as directed.
S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F Roof trusses (framed), truss, framed brackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge
S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed
S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.
M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate). Plinth protection laid to a slope of 1 in 24 in alternate bays system. Each bay shall not exceed 3m in length, 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heator hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) complete all as specified and directed.
M&L Reinforced cement concrete M 25 ( Design Mix) using 20mm graded aggregate as in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge
M&L Reinforced cement concrete M 25 ( Design Mix) using 20mm graded aggregate as in columns, etc.; complete all as specified and directed by Engineer-in-Charge
M&L Reinforced cement concrete M-25 (Desig mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge
M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to batten complete for rough finished surfaces of concrete, complete all as specified and directed by Engineer-in-Charge
M&L form work to sides of pillars, posts, struts, piers, columns/slabs, and similar work, complete for rough finished surfaces of concrete, complete all as specified.
Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed by Engineer-in-Charge
All as per item No 15 but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.
M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified.
M/L cement concrete Type B2 1:2:4 ( 40mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels all as specified
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
Supply and laying, jointing 150mm internal dia of DWCPE pipe in lieu of SGSW incl testing and laid in trenches to a level on concrete bed complete all as specified.
M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.
M & L for brickwork with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified
M&L for Cement Concrete Type B1 1:2:4 (20mm graded aggregate) as in copings, kneelers, apex stones, bed plates, including weathering, slightly rounded for chamfered angles and throating, as directing
M & L 20 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in CM 1:2 all as per specified and directed.
Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified.
Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified.
M&L For 150mm PCC type C-2 (1:3:6) using 40mm aggregate as in under floor all as specified
M&L For 100mm PCC type B-1 (1:2:4) using 20mm aggregate as in under floor all as specified
S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 110mm mm dia ,in four storey building complete all as specified. Make prince
S&F in repairs PVC (SWR) bends of any radius ( 110mm bore) including jointing with solvent cement complete all as specified. Make prince
M&L for cement concrete 1 : 4 : 8 type D2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100mm).
M&L for 15 mm thick in CM 1:4 on new surfaces of concrete or brick surfaces of walls or chajjas or pillars finished even and smooth without using extra cement including scaffolding and necessary formwork if required complete all as specified and directed.
M & L for preparation of new plastered surface of wall and jallies and applying two coat of cement based paint over one coat of primer from the same manufacturer including scaffolding if required complete all as specified and directed.
S&F for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repairs PVC (SWR) bends of any radius ( 75mm bore) including jointing with solvent cement complete all as specified Make prince
S&F in repairs PVC (SWR) junction double,(double T, 110 mm bore), equal or unequal , including jointing with solvent cement complete.
S&F in repairs PVC (SWR) junction double,(double T , 75 mm bore ), equal or unequal complete, including jointing with solvent cement.
S&F in repairs PVC (SWR) vent cowl of 110 mm bore complete all as specified.
S&F in repairs PVC (SWR) vent cowl of 75 mm bore complete all as specified.
S&F in repair PVC floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.
S&F in repair Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified.
S&F 10 ltrs capacity PVC colour low level flushing cistern with PVC flush pipe 32mm dia complete all as specified. Make : Cera 1st quality/Parryware/Hindware
M & L for cement concrete type C2 (1:4:8) using 40 mm graded as in foundation filling and mass concrete complete all as specified and directed by Engr in charge
M&L newly plastered from walls applying a uniform thickness (average 2-3 mm thickness) of cement based wall care putty of approved make (Birla/ Jk) using spray machine to the entire surface of walls and applying two coats of Oil Bound Distemper on wall surfaces using Distemper Spray machine to give an even and smooth surface all as specified and directed.
S & F 1000 ltr rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl dismentling water tank complete all as specified and directed.
S&F stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including providing suitable size groove for adjusting top level ,moulding of slab each side and polished all as specified .
S&F vitreous chinaware coloured wash hand basin with pedestal of size 580mm x 450mm complete including , CP Waste couppling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.
S&F vitreous China coloured European type WC (single piece)including connection to drain,'S' trap and fixing bolts ,plastic water closet seat cover complete all as specified. Make : Cera, Campbell Clean Rim of size 55x350x370 mm with seat cover with matching in white colour. complete all as specified.
S&F 25mm bore MS tube galvanized medium grade with all fitting s and fixed complete to walls and ceilings or laid in floors complete all as specified and dircted.
All as per item No. 51 above but 20 mm bore.
All as per item No. 51 above but 15 mm bore.
S&F PVC connections 15mm bore 450mm length heavy duty with PTMT nuts complete all as specified and directed.
S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed..
S&F Pillar taps, fancy type chromium plated, with capstan heads, chromiumplated,fancy type screwed downhigh pressure,with or without lettered'Hot'or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.
Supply only 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.
S&F powder coated 50 micron aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised alumnium snap beading, screws etc.complete all as specified and directed by Engineer-in-Charge
S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified
S&F Powder Coated Anodised aluminium window and ventilator shutters/sliding/ side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) including 4mm thick glass pane/ ss wire cloth of 0.36mm nominal dia of wire and 1.40mm average width of aparture complete all as specified. Note: The rates qouted by contractor deemed to be inclusive of entire completion of work like glass panes 4.00 mm thick and stainless steel wire coth 0.36mm nominal dia of wire average width of aperture 1.40mm complete. Net area to be measured for payment purpose.
M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account.
S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.
S&F bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.
S&F 15mm bore stop valves fancy type chromium plated screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for union sand fixed complete all as specified and directed.
M& L for non skid coloured rectified ceramic tiles 400x400x7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed for laying floor in CM 1:6 complete all as specified and directed by Engineer in Charge.
M & L for 600x600x08 to 09mm thick vitrified tiles(joint less) (make of tiles as approved by GE)as in floor over and including 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including hacking out the existing floor surface,cleaning with water and applying cement slurry @ 3 kg/sqm on prepared surface of floor complete all as specified directed by Engr-in-Charge.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry laid over 15mm thick screed bed in cm 1:6 as in floors with no pigment complete all as specified and directed
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as directed.
S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates
S & F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
M&L for point wiring with 2 single core FRLS PVC insulated , unsheathed stranded copper conductor of size 1.5 sqmm and including 1 single core of size 1.5 Sqmm FRLS PVC insulated , unsheathed stranded copper conductor as Earth continuty conductor and PVC casing/caping of size 20mm, medium grade for One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board complete all as specified and as directed by Engr-in-Charge.
M&L Switch socket combination 2in 1, 5 A flush type, ISI marked including PVC Gang box suitable for mounting switch & socket combination 5 Amps complete all as specified and directed by Engr-in-Charge.
S&F wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed by Engr-in-Charge
Pre-fabricated portable rooms consisting of factory made panels 75mm thick for walls and roof in pre-coated sheet, thermal insulated, stuffed, high grade galvanised steel duly chemically coated with six layers from inside and outside as per latest American Technology and know-How for protection from Heat, Pest, Rust, Termite, Fire and Water. The panels are light in weight though very strong and durable, non-asbestos, non-corrosive, unbreakable, moisture resistant to withstand any adverse weather conditions whatsoever, Highly effective Air Conditioning and save electricity energy. Surface area Prefabricated panels for Walls size: 18 X 9 X 2= 324, 12 X 10 X 2= 240, 6 X 9 X 3= 162 Roof: 20 X 20= 400, 7 X 7= 49 Total= 1175 Sq.ft. Flooring: Raised PCC Base platform 1 feet height with topping of 2’X2’ vitrified tiles for area: 18 X 18= 324, 6 X 6= 36 Total= 360 Sq.ft. False ceiling in 2X2 grid designer tiles area: 12 X 18= 216 Sq.ft. Aluminium powder coated sliding windows with grill size: 2.5 X 4 X 2Nos.= 20 Sq.ft. Doors with M.S structure frame wooden flush openable doors size: 7 X 3 and 7 X 2.5 Inclusive M.S heavy duty structure for verrandah Wall tiles for Toilet area: 6 X 7 X 4 Nos.= 168 Sq.ft. Installation with fittings, accessories, waterproofing & painting texture coating 3 layers from inside & outside of your color choice @ 10%
M/L for rendering 15 mm thick in CM 1 : 4 on fair faces of brick work or concrete surfaces etc finished even and smooth without using extra cement all as specified.
M&L for Cement Concrete Type B1 1:2:4 (20mm graded aggregate) as in copings, kneelers, apex stones, bed plates, including weathering, slightly rounded for chamfered angles and throating, as directing
Supply and laying, jointing 150mm internal dia of DWCPE pipe in lieu of SGSW incl testing and laid in trenches to a level on concrete bed complete all as specified.
M&L for providing pre cast RCC !:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc complete all as required.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
Surface excavation n exc 30 cm deep and averaging 20 cm deep and getting out all as specified.
M & L for hardcore of broken stones or boulders of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface
M&L for 25mm thick Sand filling under floors or in foundation including watering and consolidation
M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade
M & L for cement concrete type B0 1:2:4 (using 12.5 mm graded aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :
(a) One light/fan/bell point controlled by one by one way switch.
(b) -ditto- as above item No 85 but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.
(c) -ditto- as above item No 85 (b) but Same board.
All as per item No 85 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge.
One power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.
M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified.
M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified.
M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified.
M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.
S & F electronic fan regulator 5 step ISI marked connecting complete all as specified.
M&L in replacement socket outlet 6 Amp flush button type complete all as specified and directed by Engineer in charge.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
Supply and fix in repair MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge
M&L MCB SPN 40 Amp "C " curve
M&L MCB SP 6 to 32 Amp "C" curve.
Supply and fixing Exhaust fan 300 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan fixing on 19/18mm thick ply size as per site requirement complete all as specified and as directed. Make : Orient /Bajaj/Havells
S&F ceiling fan 1200mm sweep including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor of size not less than 0.5 sqmm from ceiling rose to fan connector, length as per requirement at site and hook etc all as specified and directed by Engr in Charge. Make:- Havells/Bajaj/Crompton Greaves
M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed
Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls all as specified and as directed. Make : RR Kable, Havells & polycab, Note: Three runs of 6 sqmm cable shall be measured as one RM.
Supply & fixing of geyser 25 ltr capacity, properly fixing with nuts bolts & fasteners, connecting with 02 nos CP connection, NRV etc complete all as specified and directed make Bajaj /Havells/ CG
M&L sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 20Amps complete with one single pole MCB 'C' series 20 A capacity all as specified and directed. Make: Legrand/Indoasian/ABB
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.
Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete.
Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.
S&f fresh air fan PVC body AC single phase 230/240 V of size 300 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.
Supply and fixing ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed .
Supply and fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete
Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 4 core.
Supply and fix GI Pipe 32 mm dia light grade, for laying in road crossing/ fixing of vertically complete all as directed
Supply and laying sub clas 'B' Bricks of old size ( 23 x 11 x 7 cm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer -in-Charge
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed
M/s Amit Brothers
SHREE RAM BUILD TECH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .