REPAIRS TO SEWAGE LINE AND MANHOLES, REPAIRS TO CULVERT, DRAIN, PATH AND PAVING ETC AND WELCOME MAINT OF RESIDENTIAL AREAS AT INS AGRANI, COIMBATORE

Amount

M&L for cleaning of sewage line 100mm dia for removing the blockage by manually or technically all as specified and as directed.

All as per item No 1 above but 150mm dia sewage line.

All as per item No 1 above but 200mm dia sewage line.

M&L for cleaning of manhole of any size and depth upto 1.5m by removing the sludge including opening and removing the cover slab and keeping in position after cleaning etc complete all as specified and as directed.

All as item No 4 herein above but for manhole of depth exc 1.5m.

Cleaning and removing chock up/blockage of IWC and EWC including removal of debris etc complete.

All as per item No 6 herein above but for floor traps nahani trap and keeping the cover grating in position.

All as per item No 7 herein above but for gully traps.

M&L for cleaning of covered drain including removal of sludge by opening the cover slab and placing the same in position properly all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and 1.5m deep and getting out in hard/dense soil all as specified and as directed.

Demolition of cement concrete un reinforced n.exc 15cm thick below or above ground level all as specified and as directed.

All as per item No 11 herein above but reinforced concrete.

Demolitiion brickwork or stone/boulder masonry, built in cement mortar including all quoins arches pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles etc.complete all as specified and as directed .

M & L for brickwork with subclass 'B' bricks strainght or curved on plan exc 6 m mean radius built in cement mortar 1:4 etc.complete all as specified and as directed .

Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water etc and removing the debris all as specified and as directed.

M&L for rendering 15rnm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement etc complete all as specified and as directed .

M/L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping ,kerbs etc ,including necessary form work etc complete all as specified and as directed .

M/L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in precast cover slab set in CM 1:4 including necessary form work etc complete all as specified and as directed . NOTE : reinforcement shall be measured and paid separately.

S&F Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed .

M/L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipe including packing to drain pipe and hunching against sides of pipe for 150mm dia pipes all as specified and as directed.

All as per item No 20 herein above but for 200mm dia pipes.

All as per item No 20 herein above but for100mm dia pipes.

Returning filling including levelling watering and well ramming in layers n.exc 25cm each in hard/dense soil all as specified and as directed.

Removal of surplus soil to a distance n.exc 50m and depositing at a level n.exc 1.5m above the starting point all as specified and as directed.

M/L extra for forming fair finishing to drain channel 30cm inner girth in cement concreting using extra cement including forms, mould mitred/stopped end etc all as specified and as directed.

M/L for 100mm dia glazed stone ware pipes ISI Marked laid in trenches and jointed all as specified and as directed.

All as per item No 26 herein above but for 150mm dia pipes.

All as per item No 26 herein above but for 200mm dia pipes.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment with and including screed bed in cement mortor 1:4,20mm thick all as specified and as directed.

M/L for 40 mm thick cement concrete type B-1, :2:4 (20mm graded stone aggregate), finishing even and smooth without using extra cement all as specified and as directed.

M/L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) all as specified and as directed.

M & L for 75 mm thick PCC type C-2, 1:3:6 (40 mm graded stone aggregate ) finishing even and smooth without using extra cement for plinth protection all as specified and as directed.

M & L for cement concrete, type B2 1:2:4 (40 mm graded stone aggregate) in surface channels and drains all as specified and as directed.

M/L PCC type C1, 1:3:6(20mm graded stone aggregate) for coping and band including necessary formwork all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (reinforced) all as specified and as directed.

M&L for precast concrete 1:3:6 type C1 (20mm graded aggregate) for man hole/drain cover even and smooth finish without using extra cement all as specified and as directed.

M&L Machine pressede precast concrete interlocking pavor block any shape and size confirming to IS 15658-2006 of 60mm thick , M-35 Grade all as specified fixed with grey cement and pigment over and including 50 mm thick layer of coarse aggregate of grade 12.5 mm to4.75 mm for granolithic floors spreading levelling in layers n.exe 25 cm thick,well ramming including watering as required complete all as specified and as directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc all as specified and as directed.

Demolition of Pre cast concrete block walling including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework built in cement mortar etc all as specified and as directed.

M&L for Pre-cast cement concrete Type C1,1:3:6(20mm graded stone aggregate ) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 etc all as specified and as directed.

S&F PVC (SWR) pipes in any length laid in trenches/ in floors/in walls etc as in weep holes 110mm dia all as specified and as directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash on Ceiling all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and appliying one coat of cement base paint all as specified and as directed.

M&L for preparation of old treated surfaces of walls and appliying one coat of acrylic emultion distemper all as specified and as directed.

M&L for preparing the old painted surface of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M/L preparing the old painted surface of steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for complete removal and applying two coats of oil bound distemper over a coat of alkali resistant priming coat all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required fixed on wall,110/75/50mmdia, including all fittings all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortat bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises all as specified and directed.

S&F non skid ceramic tiles 7 to 8mm thick(Sqare/rectanglar) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles with and including screed bed or bedding layer of mortar 15mm thick for laying floor finshes in CM 1:6 all as specified and directed.

S&F coloured glazed cermic tiles in verical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including rendering 10mm thick on fair faces of brick work or concrete surfaces CM 1:4 all as specified and directed.

S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, light shade tiles with and including screed bed or bedding layer of mortar 15mm thick for laying floor finshes in CM 1:6 all as specified and directed.

S&F in repairs stop valves 20 mm bore , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed all as specified and directed.

S&F in repairs stop valves 15mm bore , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed all as specified and directed.

S&F in repairs Bib taps, for 15 mm bore cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule and fixed (Minium weight 15 mm - 90 gms) all as specified and directed.

S&F in repairs Bib taps, fancy type Chromium plated cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore all as specified and directed.

S&F Brass CP mixer for mixing Hot & Cold water screwed down for iron pipe and fixed to bore 15 mm 2 in 1 type (suitable to supply water for shower) all as specified and directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe(minimum weight 40 gms) including shower arm 15 mm size 195 mm long of 45 degree with flange of PTMT any colour (Minimum weight 40 gms) all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or with out lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron/PVC pipe and fixed for bore dia of pipe in 15 mm all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm ,all as specified and as directed.

S& F in repair PVC valveless, syphonic action type, flushing cistern, 10 Ltrs capacity low level, white, with inlet,ball valve, float and handle including brackets ,all as specified and as directed.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,all as specified and as directed.

S& F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union ,all as specified and as directed.

Supply and fix of rotational moulded polyethiline water storage tank of capacity 500 ltrs (cylindrical /vertical) with closed top hosited and fixed in position all as specified and as directed.

All as per Item No.67 above but 1000 ltrs capacity.

All as per Item No.67 above but 2000 ltrs capacity.

S&F in repairs brass float valves 25mm bore high pressure of with polythene float and fly nut complete screwed of iron pipe or PVC ferrule and fixed all as specified and as directed.

All as per Item No.70 above but 20mm bore

All as per Item No.70 above but 15 mm bore

S&F in repairs tubular towel rail,brass chromium plated, 20mm dia, D type, 60cm long between flanges etc all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips etc all as specified and as directed.

S&F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc all as specified and as directed.

S&F hand shower (health faucet) with 8 mm dia 1 Mtr long flexible tube and wall hook all as specified and as directed.

S&F fixed in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),complete as specified and as directed.

S&F PVC (SWR) pipes single socketed including all fittings, in any length with rubber ring joints,110 mm dia, fixed to walls,including taking down eaves gutters and rainwater pipes (any size or pattern), with all fittings, complete as specified and as directed.

s&F sheet glass 4 mmthick ,ordinary quality and glazing putty in squares not exe. 0.5 sqm in each pane all as specified and as directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete as specified and as directed.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete as specified and as directed.

S&F in repair cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg etc, complete as specified and as directed.

S&F in repair Aluminium Hat pegs, solid body,125mm to 175 mm etc, complete as specified and as directed.

S&F In repair double action spring hinges 150mm mild steel with steel wire spring stove enamelled, complete as specified and as directed.

S&F in repair Mortice lock, vertical type, size 100 mm mild steel 4 levers complete as specified and as directed.

S&F in repairs aluminium alloy, anodized, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy , complete as specified and as directed.

All as per Item No.87 above but 250mm long

S&F in repairs butt hinges medium weight, cold rolled, mild steel 100mm long complete as specified and as directed.

M&L for preparation of old surfaces of wall and apply one coat of white wash all as specified and as directed.

S&F ball brass valve 15mm bore,high pressure with polythene flot and fly nut and screwed for iron pipe or brass ferrule all as specified and as directed.

All as per Item No. 91 above but 20mm bore

All as per Item No. 91 above but 25mm bore

S&F in repairs. aluminium handles cast type,anodized 150mm long complete as specified and as directed.

S&F in repairs floor door stopers of aluminium alloy body and tounge, anodized with hard drawn steel spring, fixed in floor, 150mm long complete as specified and as directed.

Taking down Un-Serviceable point wiring of Aluminium on batten/surface conduit/concealed conduit wiring (light/Fan/socket/call bell/ Power ) complete including fixture and fittings such as switches, ceiling roses, shades, sockets, holders, light fittings and call bells etc ) removing materials to store for taking credit after completion of work (Credit for above items should be made as per conditions separately) and making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with multi - stranded FRLS copper conductor 1.5 Sqmm size nominal area PVC insulated unsheathed cable 1100 volts grade conforming to IS:694 drawn in and including PVC casing caping with new concealed sunk in pressed steel terminal boxes of 1.6 mm thick size or plastic gang box as per site requirement and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed FRLS cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same conduit all as specified and directed by Engr-in-charge for one light/fan/exhaust fan/call bell point controlled by one switch. Note : Red/Blue/Yellow for phase, black for Neutral and Green for Earth.

All as per item No. 97 here in before but one three pin socket outlet 5 Amps, on independent Board.

All as per item No. 97 here in before but one three pin socket outlet 5 Amps on the same Board.

All as per item No. 97 here in before but one three pin socket outlet 5 Amps independent but below the switch board of light points in the same vertical plane

All as per item No. 97 here in before but one 3 pin socket outlet 15 amps independent with cable 2.5 Sqmm.

All as per item No. 97 but one light point controlled by two 2 way switches.

M&L for point wiring with mutli-stranded FRLS copper conductor 1.5 Sqmm size nominal area PVC insulated unsheathed cable 1100 volts grade conforming to IS:694 drawn in and including concealed PVC rigid conduit or as directed with new concealed sunken box suitable for modular switchesincluding single core multi-stranded FRLS copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for one light/fan/exhaustfan/call bell point controlled by one switch. Note : Red/Blue/Yellow for phase, black for Neutral and Green for Earth.

All as per item No. 103 here in before but one three pin socket outlet 5 Amps, on independent Board.

All as per item No. 103 here in before but one three pin socket outlet 5 Amps on the same Board.

All as per item No. 103 here in before but one three pin socket outlet 5 Amps independent but below the switch board of light points in the same vertical plane

All as per item No. 103 here in before but one 3 pin socket outlet 15 amps independent with cable 2.5 Sqmm.

All as per item No. 103 but one light point controlled by two 2 way switches.

M&L for sub main wiring with 3 run of 6 sq mm for phases, neutral and earth using single core multistranded copper conductor as per IS 694 PVC (FRLS) insulated, unsheathed ,multistrandard copper conductor drawn in and including PVC casing caping with all accessories etc and earth conductor connected to common earth dolly including taking out old unsv aluminium / copper wiring complete all as specified and directed. Note:Three runs of 6 Sqmm size PVC copper cable, and one run of PVC casing capping shall be measured as one unit length.

M&L for sub main wiring with three run of 4 sq mm for phase, neutral and earth using single core multistranded copper conductor as per IS 694 PVC (FRLS) insulated,unsheathed ,multistranderd copper conductor drawn in and including PVC casing caping with all accessories etc and earth conductor connected to common earth dolly including taking out old unsv aluminium / copper wiring complete all as specified and directed. Note:Three runs of4 Sqmm size PVC copper cable, and one run of PVC casing capping shall be measured as one unit length.

Supply and Fixing in repairs Switch flush type, 5 Amps, single pole, one way and connection complete all as specified and as directed.

Supply and Fixing in repairs Switch Socket combination, 2 in 1, 3 pin 5 & 15 Amps (6 pin) flush type and connection complete all as specified and as directed.

Supply and Fixing in repairs Switch Socket combination, 3/2 pin 5 Amps flush type and connection complete all as specified and as directed.

Supply and Fixing in repairs Ceiling Rose Surface Poly carbonate type 65 x 50 mm three terminals and connection complete all as specified and as directed.

Supply and fixing in repairs Bell push, flush type, 5 Amps, single pole.and connection complete all as specified and as directed.

Supply and fixing in repairs Bell, AC, Ding Dong type 230 Volt. all as specified and as directed.

Supply & Fixing in repairs Regulator, Electronic step type, suitable for Ceiling fan and connection complete all as specified and directed.

Supply & Fixing in repairs Regulator, switch type, suitable for Ceiling fan and connection complete all as specified and directed.

Supply & Fixing in repairs Regulator, Modular, Electronic Step type 2 module and connection complete all as specified and directed.

Supply & Fixing in repairs Modular type Switch single pole 6 Amps one way 1 Module and connection complete all as specified and directed.

Supply & Fixing in repairs Modular type Switch single pole 6 Amps Two way 1 module and connection complete all as specified and directed.

Supply & Fixing in repair Modular type Switch single pole 16 Amps one way 1 module and connection complete all as specified and directed.

Supply & Fixing in repair Modular type socket out let 2 in 1, 6/16 Amps 2 module and connection complete all as specified and directed.

Supply & Fixing in repair Modular type Socket out let 6 Amps 2 module and connection complete all as specified and directed.

Supply and fixing modular white cover plate with frame 1 Module all as specified and directed.

Supply and fixing modular white cover plate with frame 2 Module all as specified and directed.

Supply and fixing modular white cover plate with frame 3 Module all as specified and directed.

Supply and fixing modular white cover plate with frame 4 Module all as specified and directed.

Supply and fixing modular white cover plate with frame 6 Module all as specified and directed.

Supply and fixing modular white cover plate with frame 8 Module all as specified and directed.

S&F in repairs, Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 16/20 Amps all as specified and directed.

S&F single pole MCB 6 to 16 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 15 KA breaking capacity conforms to IS/IEC 60947-2 and terminal box suitable upto 35 sqmm cable complete all as specifed and directed. Make/Model : Cat part No. BB10060C of make L&T or Cat part No. CSMBS1C6 of make C&S or equivalent in Schnider.

S&F DP MCB 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 15 KA breaking capacity conforms to IS/IEC 60947-2 and terminal box suitable upto 35 sqmm cable complete all as specifed and directed. Make/Model : Cat part No. BB20320C of make L&T or Cat part No. CSMBS2C32 of make C&S or equivalent in Schnider.

Supply and Fixing in repairs, MCB, C curve Triple pole & neutral, 415 Volts of capacity (40 to 63 Amps) as ordered breaking capacity 10 KA complete all as specified and as directed.

Supply and fix Regal batten for LED tube double side connection light fitting 24 W, wall mounting 230V, and including lamps and connected accessories flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make: Luker cat Part No. LT824 or LL20-221-XXX-65AL1 of make Wipro or equivalent in Philips.

Supply and fix surface and wall mounted LED Batten extruded aluminium housing provided for efficient heat dissipation with polycarbonate body diffuser and integrated electronic driver and light fitting 10W, wall mounting 230V, and including lamp and connected accessories flexible copper wire from ceiling rose to light fitting terminal complete all as specified and directed. Make: Havells Cat No. ENDURALINEARNEOBS10WLED830SPCWH OR LUKER cat part No. LT5M10 or equivalent Make of C & G/Wipro

S & F in repairs ceiling mounting LED down light 15Watt with electronic driver surface mounted, white powder coated, polycarbonate housing and pressure die cast heat sink body and diffuser suitable for indoor application complete all as specified and directed. Make : Luker cat part No. LNPSRR12 or INTEGRANEOSURFACEDLS15WLED857S of make Havell's or equivalent in Philips/Wipro.

Rajapriyaconstruction

SENTOOR BUILDERSS

joepowercorporation

SEMBA ELECTRICALS