ADDN/ ALTN AND SPECIAL REPAIR TO OPEN KITCHEN, VERANDAH, TOILETS AND SURROUNDING AREA OF BLDG NO P-02 AT CHANAKYA BAGH, CHANAKYAPURI AND ADDN/ ALTN AND SPECIAL REPAIR TO OPEN KITCHEN INCLUDING FLY PROOF ARRANGEMENT AND ALLIED WORK OF BLDG NO P-03

Amount

Demolition of brick work built in Cement morter or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed.

Dismantlling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Taking down chowkhats or frame with shutters without taking off shutters from frames of size exc 1.5 Sqm but not exc 4.00 sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

Taking down chowkhats or frame with shutters without taking off shutters from frames of size not exc 1.5 Sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, using old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in cement mortar 1:6 as in floor (Colour of tiles will be approved by GE) complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Design/colour of tiles will be approved by GE) complete all as specified and directed.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for Granite (of any type) 20 mm thick as in floor, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for Granite (of any type) 20 mm thick machine cut,as in kitchen slab cooking platform shelves, skirtings, dado, window cills etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specifeid and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and incl 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD Land complete all as specifeid and directed.

M&L 15 mm thick cement plaster in CM (1:6) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement (incl new brick work) complete all as specifeid and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil emulsion distember (using roller brush) over and including two coat of wall care putty finished even smooth and uniform surface over a coat of primer complete all as specifeid and directed.

M&L for complete removal of old plastered wall surfaces and applying two coats of oil emulsion distember over and including two coat of wall care putty finished even smooth and uniform surface over a coat of alkali resistant primer complete all as specifeid and directed.

M&L for preparation of old plasterd wall surfaces and applying two coats of wall putty finished even smooth and uniform as per manufactures instructions, surfaces to be finished even and smooth over a coat of primer and applying two coats of exterior emulsion first quality of approved colour complete all as specified and directed.

Supply and fixing powder coated aluminium 2 track bombay sliding window 2 days "D" series (25mm thick) shutter Botton and Top Section No 20506 (43x25x1.7mm) shutter interlock section no 20508 (43x25x1.7mm) shutterside handle no 20507 (43x25x1.7mm) frame bottem no 20633 (75x25.4x1.25mm) frame side and top No 20634 (75x25.4x1.3mm) with rubber beading/gasket and aluminium anodised beading all around and lock type handle of size 75mm provision of rollers withtrack etc complete all as specified and directed

S&F for Sheet glass 5.50mm thick ordinary quality and glazing with oil putty/glazing clips in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F Powder coated aluminium ornamental grill 10 mm dia, 75 X 95 mm aperture fixed in powder coated aluminium snap beading complete all as specified and directed.

M&L for 12mm thick toughned glass door end seal and fixed with stainless steel floor springs, 2nos of stainless steel handle 600mm long fancy type in each shutter fixed to glass door, heatching/flim of approved design on the glass complete all as specified and directed. Note: Floor spring and handles measured and paid separately

Supply only 32 mm dia 600 mm long handle suitable for glass door complete all as specified and directed.

Supply only Stainless steel body and internal machanism heavy duty concealed floor spring suitable for 12mm thick glass door 1.1 mtr span fixed on tiles or granite surface complete all as specified and directed

Supply and fix stainless steel body centre locking arragement suitable for glass door complete all as specified and directed.

S and F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tube used as per specifications and drawings complete all as specified and directed.

Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair 15mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No QQT-7053 or equivalent of make as specified in PS.

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Part No KUB-35041 or equivalent of make as specified in PS.

Supply and fixed in repair 15mm bore dia Stainless steel finish quarter turn central hole basin mixer round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat No FLR-5169 or equivalent of make as specified in PS.

S&F in repairs chromium plated AVS health faucet Jet spary for water closet including 15mm bore PVC connecting pipe 1.2m long with check nut and washers complete all as specified and directed.

Supply and fixed in repair chromium plated finish paper holder complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat No AKB-35753 or equivalent of make as specified in PS.

Supply and fixed in repairs 600 mm long C P finish CP Towel Rail D type complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat No CAN-1121N or equivalent of make as specified in PS.

S&F in repairs vitreous china wash hand basin counter top type of size 705mmX450mmx200mm in 18 mm thick granite (of any type) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT steel nuts of length 450mm complete all as specified and directed.

S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed.

Supply and fixed in repair peg set of 6 fixed with rawal plug complete all as specified and directed. Make: Prayag Cat no BEA-30 or equivalent of make as specified in PS.

S & F in repair Soap dispensor with removable bottle complete all as specified and directed.

S&F in repair corner shelf 200mm size 5mm thick toughened glass complete all as specified and directed. Make: Paryag Cat no BEA 48 or equivalent of make as specified in PS.

Supply and fixing in repairs floor mounted coupled star white one piece water closet (Pedestal pattern) (Italian collection) premium class of cat part No 92551 (S-22) 70 x 38 x 73 Cm with P or S of size 220 mm, EWC with inbuilt sensor for touchless flushing, ensure more hygiene, slow falling seat cover, Elegant design, Easy clean, I trap including soft closed seat cover, hinges fixing accessories set and accessories set, incl flushing cistern, with cistern fittings connection to drain or (outgoing pipe) & to flushing pipe anti siphonage pipe etc complete all as specified and directed.

S&F in repair Vitreous china squatting pan of 'Orissa pattern' long pan size 580 x 440 mm white with integral foot rest incl ‘P’ or ‘S’ trap and flush pipe etc complete incl making good the floor complete all as specified and directed.

S&F in repair PVC valves less syphonic action type low level flushing cistern 10 ltr capacity with inlet ball valve, brackets complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repair Urinal spreader of brass chromium plated any for fixing with 15 mm dia pipe complete all as specified and directed

S&F in repair Cast iron soil waste and vent pipes in any length with or with out ears with cement joints, laid in trenches or in floors for 100mm bore complete all as specified and directed.

S&F in repairs Cast iron bends (any radius) diminishing piece or tapers (large bore measued) for 100mm bore complete all as specified and directed.

M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors pavings n exc 15 cm thickness below or above ground levels complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F 15 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 15mm bore dia French Gold - Mystic finish angle cock with flange quarter turn full Antique including cover plate complete all as specified and directed.

S & F PVC connections 15mm size with PTMT steel nuts of length 450 mm complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of approved colour, size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri / Fenesta / Ecocell

Providing and fixing Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain CNC cut Flush Door Shutter of required colour, pattern and size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and all required brass accessories like handle, tower bolt, sliding bolt, hinges and megnetic lock of required size and pattern decided by Engineer -In-Charge including Make good the damage portion with plaster, making edges and painting by contractor on his own expense complete All asspecified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Make : Rajshri / Fenesta / Ecocell

S&F Stainless steel fastener of size 150 to 200mm for fixing WPC door frame and like in position complete all as specified and ditected.

S&F 200 mm long brass barrel tower bolts, wth brass screws complete all as specified and directed.

S&F 250 mm long brass sliding door bolt and fixed with brass screws complete all as specified and directed.

S&F Brass butt hinges in 125 mm long type C11 with brass screws complete all as specified and directed.

S&F 150 mm long Extruded Brass handles, fabricated type polished with brass screws complete all as specified and directed.

Supply and fixed Floor door stopper 140mm long of brass body and tongue with hard drawn steel spring, complete all as specified and directed.

Dismantling of wall and ceiling boards of any type or any size (fibre, pulp, insulation, etc) or insulation boards / slabs/ blankets, any thickness, incl cover fillet complete all as specified and directed.

M&L for Providing PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed. Make: Rajshri or equivalent of make as specified in PS or as approved by GE.

M&L for PVC 'L' angles fixed at where direction changed portion with adhessive or as per manufacture instruction complete all as specified and directed.

M&L for GI powder coated micro preforated micro look false ceiling with fleece lay-in-type, 0.50mm thick, suitable for grid/frame module of 600mm x 600mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspented by 4mm GI rod from roof slab including steel fastner wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm celing etc complete all as specified and directed.

S&F CP grating 125 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as specified and directed.

S & F 50 mm dia Unplasticised PVC pipes of pressure rating (10 kgf/ cm2) pipe, fixed to walls, ceilings or in floors etc, any type of pipe incl fittings as ends, elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips etc complete all as specified and directed.

S&F Mild steel screw bolts with dia of neck 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm and n exc 10 cm, incl drilling/making hole in concrete to fix the screw/bolt with a suitable adhesive complete all as specified and directed.

S&F Plates chequered (Fe-410 -W(Gde E-250) quality-B) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including all required assesseries complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge, hip, valley gutter, cladding to wall, fixed with self tapping screws, colour as approved by engr in charge complete all as specified and directed.

S&F Steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed.

M&L for reinforced cement concrete type B-1 1:2:4 using 20 mm graded aggregates (Nominal Mix) as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like. complete all as specified and directed.

M&L Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces (Horizontal or sloping surface) complete all as specified and directed.

M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for rough finished surfaces complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item no 82.00 above but 6 to 8 mm dia complete all as specified and directed.

S&F 18 mm thick MDF board pre laminated both side (of approved colour) fixed with screws as in storage cabinet/Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 600 Kg /cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary brass hardware fitting i.e Piano hinge ,handle, ball catchers including mortice locking arrangement, hole cap including lipping etc, and siliding rail in each Cup board complete all as specified and directed.

M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone complete all as specified and directed. Note:- Size and colour of stone to be matched with existing stone) complete all as specified and directed.

M&L for 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with 15 mm thick backing layer of cement mortar 1:4 and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment comlete all as specified and directed. Note:- Size and colour of stone to be matched with existing stone

M&L for Granite (of any type) tiles 20mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface of size 600mm x 300mm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over including backing layer 10 mm thick in CM 1:3 on wall colour and pattern as decided by GE complete all as specified and directed.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

S&F handmade stainless steel 1.2 mm thick kitchen sink single bowl SS-304 grade with 8% nickle that actively resists rusting for alonger time, size (32"x20"x10") with inbuilt standard size tap hole (30 - 32 mm diameter) for easy attachment of countertop or table mount faucets like swan neck taps with swivel spouts and pull-out faucets, Brushed matte finish sink, slightly rounded corners, Spacious: handmade kitchen sink have straight sides that form a perfect rectangular shape, offering a deep bowl and more space, sound absorption quality with a stainless steel coupling, 1 pvc waste pipe (30"), 1 No. adjustable vegetable basket incl. connecting union to pipe complete all as specified and directed.

Supply and fixed Kitchen Sink Mixer single pull-out sink mixer with 1/2 x 450 mm flexible hose Swivel spout 450 mm long braided hose 15mm bore dia chromium plated Brass round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of approved colour, size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri / Fenesta / Ecocell

Providing and fixing at site Factory Made 24 mm thick 100% Solid WPC (Wood polymer Composite) Plain Jali cut on CNC machine of approved design & measured size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. Make :Make : Rajshri / Fenesta / Ecocell

M&L for rendering 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick putty complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surfacesof any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F powder coated aluminium (Minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coating of any colour for aluminium (Minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung/ sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1 no.) complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge complete all as specified and directed.

S&F aluminium powder coated door using Jindal aluminum sections . Door chowkhat with section(14130) size- 101.6mm x44.45mm x 2.00mm and Doorshutter : vertical style with sections(19560) size- ( 85mmx44.45mm x 2.70 mmthick) , top rail section(19563) size- 85X44.45X2.0 thick ), lock rail section(15964) size- 100X44.50X2.0thick and bottom rail sectio (15964) size 101.60 x 44.50x2.50 thick ) incl 5 mm thick glass on top panel and Partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading and rubber gasket.The each shutter will be fitted with 01 No tower bolt 200mm, 02 Nos handle D type 200 mm long and one hydraulic floor spring & mortice lock complete all as specified and directed.

S&F precoated aluminium composite panels fixed in aluminium doors, windows and partitions as fixed portion complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete in all respect as specified.

M&L for 25 mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in sub bsae floor complete all as specified and directed.

M&L for Cement concrete 75mm thick type D-2, 1:4:8 (using 40mm graded stone aggregate) in concrete sub base / floors pavings etc finished even & smooth with out using extra cement complete all as specified and directed.

S&F 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in soft/loose soil incl removing the unserviceable material/soil out side the MOD land complete all as specified and directed.

M&L for cement concrete 1:2:4 type B2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F Stairs (framed) Fe-410 -W(Gde E-250) quality-B including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed. Note : (a) The work described in these items shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. (b) Removing building materials /debris / old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land. (c) Excavation to be carried out manually if during excavation there are any LT/HT cables, water supply pipe lines and other cable / pipe comes, need to be shifted carefully incl required fittings / accessories and cost of same deemed to be included in the quoted rates.

friends associeates (BID ID -3084984)

BEHAL TRADERS (BID ID -3084295)

SANJEEV ENTERPRISES (BID ID -3092842)

R.P Builders (BID ID -3084680)

MRITUNJYA ASSOCIATES (BID ID -3094162)

M/S SONU ENTERPRISES (BID ID -3076239)