Upgradation of Guest House at Ujh Barrage

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete

Distempering with 1st quality acrylic/oil bound wash able distemper (Readymade) having VOC content less than 50 grams/Liters of approved manufacturer and of required shade and colour complete as per manufacturers specifications, one or more coats on old work

Finishing walls with water proofing cement paints of required shade a/ Old work (one or more coats applied @ 2.20 Kg per Ten Sqm) over priming coat of primer applied @ 0.80 Ltrs. Per 10Sqm complete including cost of priming coat

Renewing glass panes with wooden filets wherever necessary a/Float glass panes of thickness 4.0mm (weight not less than 10Kg /Sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade, one or more coats on old work

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 Sqm and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with in 50 m leads a/ with cement mortar 1:4(1Cement: 4 coarse sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and fixing 12mm thick plaster of Paris (gypsum, anhydrous, ceiling tiles upto a height of 5M above floor level over wooden frames and rendered smooth with plaster of Paris (Frame work to be paid separately)

Taking out doors, window and clerestory windows shutters( steel or wood) including stacking within 50M lead. (a)Of area 3sqm and below.

Dismantling wood work in frames, trusses, purloins and rafters upto 10 M span and 5 M height including stacking the material within 50M leads a/ Of sectional area 40sq.cm and above

Providing wood work in frames of doors, windows, clerestory windows and other frames, Wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (Hold fast lugs or with dash fasteners shall be paid separately ) a/ Sal wood

Providing and fixing panelled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws , excluding paneling which will be paid for separately, all complete as per direction of Engineer-In-charge a/First class Kail Wood

Providing and fixing panelling or Panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick a/ Plane particle board flat pressed, three layer or graded wood particle board medium density Grade 1, IS: 3087 Marked

Providing and fixing wash basin with CI Brackets, 15mmCP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required. a/White vitreous China wash basin size 630x450mm with a pair of 15mm CP brass pilar taps

Providing and fixing white vitreous china flat backs half stall urinal of size 580x380x350mm with white PVC automatic flushing system, with fitting, standard sixe CP brass flush pipe, spreaders with Unions and clamps.(All in CP brass)with waste fitting as per IS, 2556, CI trap with outlet grating and other couplings in CP brass, including painting of fitting and cutting and making good the walls and floors wherever required a/Single half stall urinal with 5Ltr PVC automatic flushing system

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing PVC waste pipe for Sink or Wash basin including PVC waste fittings complete a/ Semi rigid pipe 40mm dia

Skilled & unskilled labour required for removing paint from wood work, removing old sanitary fitting including replacing and fixing new connection and repair of wood works.

Fitter Garde-I

Carpenters First Class

Labour

Providing and Fixing G.I. Pipes completes with G.I Fittings and clamps, including cutting and making good the walls etc Internal work – exposed on wall

15 mm dia Nominal bore

20mm dia. Nominal Bore

Providing and fixing un-plasticized – PVC pipe clips of approved designed to un-plasticized –PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length, including cutting brick work and fixing in cement mortar 1:4(1Cement:4 course sand) and making good the wall etc complete a/ 75mm

Structural steel work in built up sections, trusses and framed works, including cutting, hosting, fixing in position and applying a primary coat of approved steel primer all complete a/ welded

Providing and fixing G.I Chain Link Fabric fencing of required width in mesh sixe 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the directions of engineer-in-charge. a/ Made of G.I wire of dia 4 mm

Earthwork in excavation by manual means in tranches for foundation, drains, pipes, cables etc (not exceeding in 1.5M in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5M, including getting out excavated earth and disposal of surplus excavated earth as directed (1M from cutting edge) All kinds of soil

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement Mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 M (stacks of cleaned bricks shall be measured): a/ from bricks work in cement mortar

Demolishing cement concrete manually/ by Mechanical means including disposal of material within 50 mtr. lead as per direction of engineer -in –charge 1:3:6 or richer mix .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with 1:3:6(1cement:3 coarse sand:6 graded stone aggregate 20mm nominal size

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, butteresses, string of lacing courses, parapets, coping, bed blocks, anchors bocks, plain windows sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with a) 1:1.5:3 (1 Cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal sixe)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottles green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality a/- Rectangular shape 600x450 internal dimensions

Dry stone pitching (any thickness) excluding cost of stones

Horizontal

On slopes

Grouting of stone pitching using M-10 nominal mix concrete maximum size of aggregates 20mm nominal @ 6 M3/100M2 on Horizontal /side slopes complete including curing

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600X600 mm

Providing and fixing gyser of 25 litres capacity of ISI brand and manufacture. (LMR)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: (a)Cement Mortar 1:6 (1 cement : 6 coarse sand)(excluding supply of bricks)

Centering and shuttering including strutting, propping etc and removal of form for: c) Columns, pillars, piers, abutments, posts and struts

Centering and shuttering including strutting, propping etc. and removal of form for: (b) Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Carriage of sand and stone aggregates from source to site of work avg. distance 10KM by Mechanical Transport

Lettering with black Japan paint of approved brand and manufacture.

Supply of scaffolding /Ladder for painting of gauge at site including carriage of scaffolding and line charges and return back to the market after completion of work.

RUNVIJAY GOVT CONTRACTOR

M/S ROCKEY GUPTA GOVT CONTRACTOR

davinder singh

BACHITER SINGH