WORK OF PAINTING OF VARIOUS EQUIPMENTS LIKE CT, PT, CVT, CB ALONG WITH THEIR MECHANISM BOXES ETC. AT 220 KV SUB STATION MOTIRAM ADDA, GORAKHPUR UNDER E400 KV SUB STATION DIVISION, GORAKHPUR

Amount

Scratching of old and rusted painted surface of cubicles and applying putty on holes then providing red oxide primer of luxol burger make in 02 coats. Apploying spray painting of smoke grey colour enamel paint in 02 coats after 12 hours interval of Burger/Nerolec/Asian make along with brush painting of inner surface by white/ grey colour and then writing of nomenclature details on Isolator MOM Boxes, 220 /132KV CT/CVT/PT Junction boxes, 220/132KV Circuit Breaker's Marshalling Boxes, A.C. Supply cubicle boxes using radium sheet with all cost of men, material, T&P etc. required to complete the Job as per details given below.

220KV C.T. Junction Box of size 900×400×700 mm

220KV C.V.T. Junction Box of size 1020×620×410 mm

220 KV Circuit Breaker Marshalling Box of size 1380×490×800 mm

220 KV Circuit Breaker Mechanism Box of size 600×600×450 mm

220 KV Current Transformers.

220 KV Capacitor Voltage Transformers.

132 KV Circuit Breaker Mechanism Box of size 1100×900×600 mm

A.C. Power Supply Cubicles of size 1650×1510×400 mm.

A.C. Power Supply Cubicles of size 1250×550×620 mm.

A.C. Power Supply Cubicles of size 1860×620×540 mm.

132KV Current Transformers.

132KV Potential Transformers.

132KV C.T. Junction Box of Size 380×170×610 mm

132KV P.T. Junction Box of Size 380×170×610 mm

220KV Isolator MOM Boxes (LSI / BSI / Tandem) of size 330×500×280 mm

132KV Isolator MOM Boxes (LSI / BSI / Tandem) of size 330×500×280 mm

Providing and Fixing of 3" dia Circular Phase Colour marking on radium sheet of 3M make in Phase Colours on all sides at about 6' height of equipments / equipment lattice structures installed in 220/132KV Switchyard in Red/Yellow/Blue Colour after due cleaning of rusted & oily surfaces.

Scratching of old and painted surface of 02 mtr. long lawn light poles and then applying 01 coat of red oxide primer and then 02 coats of synthetic enamel white colour aluminium brush painting with all cost of men, materials and T&P for the work.

Scratching of old rusted surface of 200×200×150 mm size 16swg MS Sheet light junction boxes and then applying 01 coat of red oxide primer and then 02 coats of synthetic enamel white colour aluminium brush painting with all cost of men, materials and T&P for the work.

Writing of nomenclature details on various control and relay panels , ACDB, ACLDB Panels, Battery charger panels, Mulsifyre system Panels, DG Set panel, CTR Panel, RTCC Panel and RTU Panel installed at 220KV S/S Gorakhpur-II control room in white colour synthetic enamel paint as per direction of UPPTCL Supervisor/Engineer.

M/s Meera Enterprises

M/S PRABHATT ENGINEERING WORKS

R.K. ENTERPRISES

V.P.Associates