EEE-III/RZ/NZ/TC/2022-23/06.1

Amount

Supplying and erection of galvanized D-iron complete with shackle insulator (75 x 90 mm ) GI bolt and nut coach screws etc as required.

Supply and fixing of 1.1 kv Grade XLPE insulated Arial Bunched Cable, IS 14255 of Al. conductor, 2Cx16 Sq. mm+25 Sq.mm (Bare) including tension clamp, J hook or I hook, Self tightening (Dead End) with pole bracket using stainless Steel Strap clamp, Self locking suspension clamp with pole bracket using stainless Steel Strap & Buckles including all accessories as complete as required.

Supply of XLPE insulated and PVC sheathed Al conductor un-armoured cable of 1.1KV grade conforming to IS 7098 of following size:- (a) 2x10 sqmm

Supply and fixing of 32mm dia G.I.Pipe(Medium Class) 1Mt.long bracket i/c wiring with 2.5 sq.mm copper conductor wire as reqd.

SITC of 60 watt LED street light luminaire fitted with lens made of pressure die casting aluminium housing & toughened glass cover with following specification & fixing on existing pole complete with required IPC i/c connections as reqd (a) Total system wattage =60 watt + 5 % (b) luminous efficacy > 95 lumens/watt (c) Power factor = > 0.9 (d) Protection level - IP 66

Earthing with G.I. earth pipe 4.5 mtr long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply & Erection of R.C.C/.PCC pole of length 9 mtr, the top section of the pole shall not be less than 115 MM X 105 MM and bottom section shall not be less than 315 MM X 105 MM, in brick blast and ramming foundation I/C excavation and refilling etc as complete as required and finishing with 150 mm thick cement concrete (1:3:6) layer on top.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-(a) 2C x 25 sqmm

P/f of hot press sheet moulded compound (SMC) fire retardent (temp. resistance upto 200 C) , IP-55 weather proof pole box of inner dimention 300 mm X 200 mm X 105 mm (NS) complete with suitable arrangement for fixing 4 nos. SP MCB &63 Amp.Double pole isolator (MCB/Isolator excluded) with neutral link duly shorting on DIN Channel with 2 nos. MS clamps with SS back plate of suitable size with Danger plate, Monogram property printed on the cover etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(a) 100Amp,16KA,TPMCCB

SITC of Pillar box size 900 mm x 450mm x 250mm suitable for mounting incomer of 250 A MCCB/Main switch 4 Pole and energy meter 3 phase complete with eleethoypic grade Aluminium bus bar of size 25mm x 10mm mounted on galvanized M. S. body power quoted pilferage proof SMC door duly welded with S.S. with rain com size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below grand and covered with shode proof SMC sheet of 3 mm as required.

Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd.

SACHDEVA ELECTRICALS