IMPROVEMENT OF PATIENT AND STAFF MESS OF CH BSF CAMPUS KADAMTALA (SH R and M OF EI and EX FANS)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required A) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required B) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required C) 2 X 6 sqmm + 1x 6 sqmm

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required d) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. A) 3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. B) 3 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. A) 20 mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. A) 5/6 amps switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. B) 3 pin 5/6 amp socket outlet

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), 16 Way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Single Pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. B) Double Pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-Charge.

Providing and fixing 300 mm sweep Ventil Air exhaust fan light duty with suitable louver /shutter in existing opening hole including making good the damage, testing, commissioning, connection etc as required at site. (Havells/CG/Usha/Bajaj Make)

Providing and fixing 450 mm sweep 1400 rpm exhaust fan Heavy duty with suitable louver /shutter in existing opening hole including making good the damage, testing, commissioning, connection etc as required at site. (Havells/CG/Usha/Bajaj Make)

Providing and Fixing of 1X1 Feet 24 watt square / round surface / recess mounted LED slim downlight fitting complete with electronic driver & complete with all accessories etc as required. (Crompton/ Havells / Philps /Bajaj / make)

Supply, installation, testing and commissioning of 20 watt LED tube fittings prewired for LED tube with aluminium housing and polycarbonate diffuser, complete with all accessories and LED tube directly on ceiling/ wall including connection with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Model Orient/ Havells/ Philips/CG/Bajaj make)

Supplying and fixing 3 mm thick phenolic laminated sheet cover in front of MS switch box including making hole and metal screw stc. As required. Hylem/Formica/ As approved by engg incharge.

Providing and fixing of 9 watt B-22 (Bayonet Cap) LED bulb 3 star, 220-2240 V AC, 50/60 Hz, 800-900 lumens, 4000K-4500K cool white, power factor not less than 0.9, life span 15000 to 25000 hours, Plastic and aluminium or polycarbonate housing Etc complete as required. (Havells CG/Philips/Bajaj Make)

SITC of 1450 mm(L) x 600 mm(W) x1000 mm(H) double door main LT Pannel (essential and non-essential) made of 2 mm thick MS sheet steel including priming & powder coat paint etc as required. Panel having separate detachable gland plate, angle iron base frame made out of 50mm x 50mm x 5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity busbars to MCCBs spreader links including incoming/ Outgoing cables connection where ever required, spreader terminal links for spare MCCBs, heavy duty connectors/ terminals including incoming or outgoing cable connections, provision of incoming 125 amp MCCB (But without MCCB) - 2 nos and outgoing 100 amp MCCB (But without MCCB) - 04 nos. (Panel should be as per design & drawing approved by Engg in charge)

Please Enable Macros to View BoQ information