Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest bid | |
| 2 | L2₹7.3 L+₹1.1 L (18.3%)Rejected-AOC | L2 | Rejected-AOC Not being lowest bid | |
| 3 | L3₹9.7 L+₹3.5 L (56.1%)Rejected-AOC | L3 | Rejected-AOC Not being lowest bid | |
| 4 | L4₹10.1 L+₹3.9 L (62.3%)Rejected-AOC PLOT NO 53 54 SAMLL FACTORY AREA AUTOMOTIVE SQUARE KAMPTEE ROAD NAGPUR MAHARASHTRA 440026 UDYAM MH 20 0159507 | NAGPUR | MAHARASHTRA | 440026 | L4 | Rejected-AOC Not being lowest bid | |
| 5 | L5₹10.8 L+₹4.6 L (73.8%)Rejected-AOC | L5 | Rejected-AOC Not being lowest bid |
Tender Value
₹9.7 L
EMD Value
₹19,360
Closing Date
2 Oct 2024, 6:00 pmClosed
AGE (I) AF Sonegaon, Nagpur
Bldg P-51, 44 Wings AF Station Sonegaon, Nagpur-440005
PROVN OF SHED FOR VEHICLES AT AF STATION SONEGAON ,NAGPUR
2024_MES_671664_1
8523/E8
Open Tender
Civil Works
Item Rate
180 days
Sonegaon
As per NIT
8 documents required · 8 mandatory
₹500
AGE (I) AF Sonegaon
₹19,360
Yes
4 Nov 2024
4 Sept 2024
9 Oct 2024
4 Sept 2024
2 Oct 2024
18 Sept 2024
4 Sept 2024 - 11 Sept 2024
Amount
Excavation in post holes (or similar holes) in hard/ dense soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.
Excavation over areas in soft/loose soil n. exc. 1.50m deep and getting out complete all as specified and directed.
Removing of surplus excavated material to a distance exceeding 50 mtr and not exceeding 100m and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed.
M&L for broken stone or boulders hardcore of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for providing PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigments over sand cushioning laid as per manufacturer's instructions complete all as specified and directed. Note : Sand shall be measured and paid seperately.
M&L for sand filling under floors or in paver block including watering and consolidation complete all as specified and as directed.
M & L for brickwork with flyash bricks using old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick/ concrete surface finished even and smooth complete all as specified and directed.
Material and labour for applying three coats of white wash on walls including preparation of newly plastered surfaces all as specified and as directed.
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate set in CM 1:6 as in coping, kerbs, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.
M&L for Fe 410-W (Gde-E- 250) quality-B Roof trusses (framed), trussed,purlins, crane gantries, rails ,column/ vertical posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and as directed.
S&F Fe 410-W (Gde-E- 250) quality-A Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
S&F 11mm to 15mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.
S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering with cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering with semi circular shape /cladding to wall, fixed with self tapping screws complete all as specified and directed.
M &L for preparation new steel and iron surfaces not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer of red oxide complete all as specified and as directed.
chronicle enterprises (BID ID -3125583)
M/s M.G. Hargunani (BID ID -3124649)
Raja Furniture and Interior (BID ID -3124659)
PURVA ENTERPRISES (BID ID -3125162)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .