8851 PROVN OF CERTAIN LBW RW MW IN THE AREA OF CHSC CMDC MINTSD AND SPECIAL REPAIRS TO BLDG No P-102 AT MINTSD AND SPECIAL REPAIR TO NON ACCESSIBLE ROOF, CHAJJA, PLASTER, BACK, LINTEL IN VARIOUS MD ACCN IN SAIBABA COMPLEX UNDER AGE BR II SOUTH PUNE

Amount

Excavation over area n exc 1.5m in depth getting out in Hard/dense Soil complete all as specified and as directed.

Removing excavation material(soils) exc. 250m and not exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point in Soil complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller capacity exc 5.0 ton & n. exc 8.0 ton all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 Cum getting out in hard / dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and as directed.

M&L for cement concrete Type B2 1:2:4 in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers in not exc 15cm thick water and rammed to a true surface complete all as specified and as directed.

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in subbase 100mm thick complete all as specified and as directed.

M&L cement concrete type B-1 1:2:4 (20mm Graded aggregate) finishig cement concrete surface even and smooth using extra cement and using vaccum dewatering method (i.e. Tremix flooring. 150mm thick) complete all as specified and as directed.

M&L for Forming Contraction joint 30mm deep x 10mm wide filled with Grade B sealing compound complete all as specified and as directed.

M&L for forming contraction joint (Dummy Joint) 65mm deep X 10mm wide filled with sealing compound Grade B complete all as specified and as directed. [Note : Guarantee period for above items will be for 3 years from executor & Contractor]

S&F for out door Volley ball net system with two number powder coated MS poles of approved colour with net and all accessories. The length and size of net system all as per international volley ball sports standered complete all as specified and as directed.

M&L for 8 layer synthetic acrylic flooring in blue/red colour or any colour as per following procedure Including necessary Line marking on synthetic flooring as per standards of sports authority of India. (i) Cleaning the surface chemically and mechanically thoroughly, earmarking the area and sealing the joints and surface cracks with elastomeric sealer to avoid the gaps between joint of the concrete surface. ii) Resurfacer : 1 Layer iii) PolyTurf coarse rubber : 1 Layer iv) PolyBase Fine rubber : 2 Layers v) Polysealer coat : 2 Layers vi) Acrylic Texture coat : 1 Layer vii) Acrylic Finish coat : 1 Layer [Note : Work should be carried out from authorised applicator i.e. Sundek sports system Mumbai or equivalent company which is specialised in sports court/ground flooring.]

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stoane agg ) as lean concrete in foundation filling complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soil complete all as specified and as directed.

Rendering 12mm thick in CM (1:4) on fair faces of PCC block walling surface finished even & smooth with sponge finish complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating AZ-150, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified in roof, wall etc. complete all as specified and as directed.

M & L mild steel rolled section (conforming gde Fe-410-W) as in roof trusses (framed) rafters, trussed purlins including distance pieces,cleats,base plates and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc including welding work complete all as specified and directed by the Engineer-in-Charge

Preparing surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below & above ground level) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and jointed in any mortar complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B0 (12.5mm graded stone aggregate) as in leveling course of floor tiles etc complete all as specified and directed by Engineer-in-Charge.

M & L glazed colour ceramic tiles of size 300mm x 450mm x 6 to 7mm thick in dado/skirting laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles etc complete all as spcecified and directed.

M&L for coloured Non skid ceramic tiles 9 to 10mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Taking up & down steel tubing & connections including cleaning for refixing 20mm dia complete all as specified and as directed.

S & F, 20mm dia. steel water tubing 'medium grade' galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (wall, ceilings, floors etc) 20mm on bore complete all as specified and as directed.

Taking up or down GI water tubing with fittings including cleaning for re-fixing or removing from site of size 15mm bore complete all as specified and as directed.

Supply and fixing in repairs GI water tubing,medium grade with fittings, fixed to wall and ceiling or laid in floor of size 15mm bore complete all as specified and as directed.

Cutting chases in brick wall, girth not exceeding 10 cm for concealing water tubing and making good in cement mortar (1:3) complete all as specified and as directed.

S&F in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including seat and cover for pedestal pattern complete all as specfied and directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc. complete all as specified and directed.

M&L for cast iron floor/Nahani trap with grating 75mm dia including jointing to waste pipe including removing old traps complete all as specified and as directed.

S&F stainless steel grating 75 to 100 mm dia suitable for nahani trap complete all as specified and as directed.

S & F in repair for Wash Hand basins, Vitreous China, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S&F in repairs pillars taps CP 15mm dia , cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe complete all as specified and as directed.

Supply only 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.

Dismantling of CI / AC/ PVC pipes of various dia jointed in CM or adhesive 75 to 100mm dia complete all as specified and as directed.

S&F for 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F for 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed

M&L for 15 mm bore stop cock chromium plated cast copper alloy with wall flange complete all as specified and directed

M&L for 15 mm bore bib tap in repair chromium plated cast copper alloy long body with wall flange complete all as specified and directed

M&L for Brass CP wall mixer 15 mm bore for hot & cold water screwed down for iron pipe fixed in repairs complete all as specified and directed

Taking down and Refixing shutter in same opening of any discription exc. 1 sqm but not exc. 2 sqm complete all as specified and directed.

Excavation in trenches n.exc 1.5M and n.exc 1.5m in depth for foundation etc n.exc 10 Sqm on plan and n.exc 1.50M in depth and getting out hard/dense soil complete all as specified and as directed.

M & L for cement concrete in foundation of post and mass concrete type C-1 in type 1:3:6 (20mm graded aggregate) complete all as specified and as directed.

M&L Precast Cement concrete block masnory CM 1:6 type C-1 1:3:6 (20mm graded aggregate)with solid blocks exc 10 cm in width complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on pcc/ concrete block wall surface finish with sponge finish to the plastered surface complete all as specified and as directed.

M&L for preparation of new plastered surfaces & applying two coats of exterior emulsion paint complete all as specified and as directed.

S&F MS angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire bolting etc and similar works confoirming fe-410-0 or fe310-0 complete all as specified and as directed.

M & L for TMT steel bars 10 mm dia and over cut to length, bent to shape required,including cranking, bending spirally etc. and binding with and including MS (annealed )wire not less than 0.9 mm dia complete all as specified and as directed.

S&F mild steel round bars 10mm dia and over binded in chain link fencing with the help of GI stepples (for tightening of chainlink fencing) complete all as specified and as directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire complete all as specified and as directed.

Supply only chain link MS Galvanised fencing any size or type complete all as specified and as directed.

S & F MS flat 50x3 mm fixing with nut - bolts chain link fencing as verticle complete all as specified and as directed.

S & F Fe 410-0 or Fe 310-0 framed work as in door or gates of angle or other section with guest plates rails , braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, fastening, etc complete all as directed by Engr-in-Charge.

Demolition of stone / block masonry /brick masonsy built in CM complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any decreiption and in any position not otherwise specifically provided for

All as per Sl Item No. 62.00 above but reinforced concrete complete all as specified and as directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc 0.11Sqm in floor etc set & jointed in neat cement slurry and poited in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM 1:6 all as specified and directed .

M&L for Vitrified Ceramic tiles 10 mm thick Colour (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Screed Bed 15 mm thick in Cement Mortar (1:6) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by EIC, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for broken stone hardcore of gauge n exc. 63mm deposited spreed and levelled in layers n exc. 15cm thick, watered and rammed to a true sruface complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base 75mm thick complete all as specified and as directed.

Dismantling of PVC water tanks of 1000 ltr capacity removing to store and all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 300mm long complete all as specified and as directed.

Supply and fix in repair brass chromium plated shower rose 125mm size complete all as specified and as directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding and PVC low level flushing cistern 10 Ltr capacity including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 105x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F three track sliding window with two or more shutter with 4 mm thick tinted glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge:- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Dismalting wrought iron or mild steel work of any description not otehrwise provided for

M&L for MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F aluminium anodised, 20mm length of barrel tower boltts of extuded section and fixed complete all as specified and as directed.

S&F extruded, aluminium alloy handles 150mm fabricated type anodised complete all as specified and as directed.

S&F aluminium alloy anodised 300 mm long sliding door bolt with hasp stable (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone wall etc. incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L rendering 10 mm thick in cm 1:3 on fair faces of brick work or concrete surface in ceiling of roof, chajja and facia etc complete all as specified and as directed.

M & L for 3mm thick wall care putty on wall complete all as specified and as directed.

M & L for 3mm thick wall care putty on ceiling complete all as specified and as directed.

M&L for rendering 10mm thick in ready mix in cement mortar (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15 mm rendering in ready mix cement mortar (1:4) using water proofing compound @ 2 % by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. [Note :- water proofing compound shall be measured and paid separately.]

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistance primer complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 25 mm bore all as specified & as directed.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

Supply only water proofing compound, ISI marked complete all as specified and as directed.

M&L for providing cement concrete type C- 1, 1: 3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection laid in boys not exceeding 2 sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection complete all as specified and as directed.

S&F in repairs CP towel rail 600 mm long 20mm dia Fixed with plastic guities with steel screws etc. Complete all as specified.

S&F ball valve brass 20mm dia bore with fly nut and float complete screwed for iron pipes or brass ferrules. Complete all as specified and as directed.

S&F in repairs soap dish chromium plated brass fixed width brass screws complete all as specified and as directed.

S&F in repairs stainless steel Wire cloth 0.56mm nominal dia of Wire and average Width of aperture 1.18mm and fixed with stainless steel stapple/ wooden beads to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed.

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m all as directed by Engr-in-Charge

M&L water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane non woven, polyster weighing not less than 3.5 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge.

Rough excavation in any type of soil not exceeding 1.50m deep and getting out complete all as specified and as directed.

Removing of excavated soil exc 250 mtr but not exc 500 mtr and depositing where directed

Surface excavation averaging 30 cm deep and getting out in any type of soil complete all as specified and as directed.

M & L for 75 mm thick cement concrete type B-1 1:2:4 (40 mm graded aggrgate) complete all as specified and as directed.

M & L for precast cement concrete type B-1 (20 mm Graded aggregate) as in perforated covers slab and set in Cm 1:4 complete all as specified and as directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc. 6 mtr mean radius, built in Cm 1:4 complete all as specified and as directed.

M&L for cement concrete type B1 1:2:4 (20mm graded aggregate) as in copings water troughs and the like incl weathering slightly rounded or chamfered angle and throughting as directed

All as per Sl Item No. 112.00 above but as in RCC complete all as specified and as directed.

S&F PVC SWR branch piece , (single 'Y') equal or unequal of 110 mm bore provided with access door complete all as specified and as directed.

S&F PVC SWR branch piece , (single 'Y') equal or unequal of 75 mm bore provided with access door complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall/floor/ ceilings etc) of size 15mm bore complete all as specified and as directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and as directed.

S&F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and as directed. (a) SP - 20048 (b) Glazing clips - 19352.

Disconnecting existing tanks ,setting aside (or lowering if required) for repair ,cleaning etc and hoisting if required reconnecting and refixing in position exc. 250 & not exc 500 ltr Complete all as specified and as directed

M&L(SWG) gulley trap 150mm setting and jointing with solvent cement complete all as specified and as directed.

Dismantling of PVC water tanks of 500 ltr capacity and removing to store and all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC cover for water storage tank of 300litres/ 500 litres Capacity fixed with PVC locking arrangements complete all as specified and as directed.

S&F in repair 20 mm bore gunmetal ,globe or gate valve with iron wheel head ,screwed both ends for iron pipes complete all as specified and as directed

S&F in repair 25 mm bore gunmetal ,globe or gate valve with iron wheel head ,screwed both ends for iron pipes complete all as specified and as directed

Demolition of cement concrete in Roofs, floors (Other than ground floor,beams staircase, landings, chajjas and similar suspended work) un-reinforced complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm stone aggregate of any thickness not more than 150mm for making the slope of roof finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipes complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II. Complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheet 5mm thick for top rail, lock rail and bottom rail and stile and rails having one side feathered edge, on other side 10mm 90° bent edge, panelling to be fitted in MS frame welded/sealed to the stiles and rails and 15mm thick PVC sheet beading inside and decorative PVC beading of 10mm x 10mm all as specified and directed and as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010

M&L for rendering 10mm thick in cement mortar 1:6 on concrete surfaces finished with sagol finish to plasterred surface by using readymix plaster complete all as specified and as directed. [Make :- Godrej / Buildwell / Ascolite].

M&L Rendering 15mm thick in CM 1:4 on stone surface finished even and smooth with thin layer of sponge finish by using readymix plaster complete all as specified and as directed. [Make :- Godrej / Buildwell / Ascolite]

M&L Rendering 5mm thick in CM 1:3 on concrete surface finished even and smooth with a thin layer of sagol as in ceiling by using readymix plaster complete all as specified and as directed. [Make :- Godrej /Buildwell / Ascolite]

M&L for applying three coats of white wash on ceiling and incl. preparation of new plaster surface complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls & applying two coats of weather shield acrylic latex paint which gives 5 year of performance warranty (Make : Burger/Nerolac/Asian paint) complete all as specified & directed.all as specified.

S&F, in repair, CP angle cock 15mm dia cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes for unions complete all as specified and as directed.

S&F in repair, concealed stop cock brass CP with long shank and cup, 15mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes for unions complete all as specified and as directed.

Repairs to chajja by taking down loose concrete cleaning the surface, applying anti corrosive paint to steel and sealing with PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates including necessary formwork and finishing the surface with cement plaster 10mm thick in CM 1:4 size of thickness shall be 70 to 80 mm and height of filling shall be 75 to 100mm complete all as specified and as directed. (Note : Reinforcement shall be measured and paid in respective item)

M&L for formwork to soffits and sides of slab fair faces complete all as specified and as directed.

S&F vitreous china bowl urinal flat back of 4655 x 355 x 265 mm, white colour (minium), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including S&F brass CP urinal spreader complete all as specified and as directed.

Supply and fixing PVC insulated sheathed wire with copper conductor flexible 2 core 2.5 sqmm for working voltage including 1100 V cable, PVC insulated passing through PVC rigid conduit of size 20 mm dia fixed to FRP junction box to street light fitting with suitable clamp as required for 8.5/9 mtr long pole for fixing to PVC conduit including suitable size of lugs for looping all as specified and directed by Engineer-in-Charge.

Supply, lay, test connecting and commissioning underground stranded aluminium conductor cable LT 1100 volt grade heavy duty XLPE insulated armoured complete laid in trenches/fixed to poles /drawn through pipes with suitable size cable glands criping type cable lugs etc all as specified and directed of size 16 Sqmm 2 core,including takind down old unserviceable cable complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 m in depth for foundation and getting out in Soft /Loose Soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 m in depth for foundation and getting out in Hard/Dense soil complete all as specified and as directed.

Returning filling in incluiding spreading levelling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 600 x 600 x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed by Eng-in-Charge.

Supply and fix FRP junction box light weight suitable for pole mounting including MCB SP 6 Amps single pole and necessary connector for loop in loop out cable connection and suitable size glands of size 250 x200x100mm complete all as specified and as directed by Engr-in-Charge. (Make: Sintex or of equivalent make)

Design, fabricate, supply, iInstalling, testing and commissioning of LT panel board outdoor type, IP 54 and all as per IE rules, prewired, and fabricated out of 2.00 mm thick CRCA sheet double door with aprons, dust, vermin, weather proof duly powder coated mounted on suitable size MS iron angle frame 50 x 50 x 6 mm welded in shape with two coats of enamel paints over a coat of red oxide primer including necessary grouting in PCC 1:3:6 type C-1 with 20 mm grade stone aggregate completed with legs 30 cm in ground in PCC and 40 cm above ground, including connecting to cable with cable glands, lugs etc. and consisting of the following:- (a) Aluminium bus bar 100 Amps - 02 Nos one for phases and - 01 No for neutral duly colour sleeved mounted on epoxy insulator - 01 set (b) Incoming MCB SPN 63 Amps 10 KA, 240 V - 01 No (c) Outgoing MCB 32 Amp SP 10 KA, 240 V - 01No

Supply and errecting in true vertical position steel tubular staged pole 8.5 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, including painting with anti corrosive black bituminous paint internally complete and externally up to planting depth with and externally exposed portion with Aluminium paint twin coat over a coat of red oxide primer upto 1.5 mtr above ground level all as required at site or directed with angle iron of size 50 x 6 mm upto 2 mtr long for hanging of flood light of four nos inculding nut, bolts washer for fixing by Engr-in-charge. (Note: Excavation and earth work, PCC for foundation and coping rate shall be shall be included under respective item of this schedule.)

S&F LED flood lights fitting 140 watts with die cast aluminium housing and toughened glass cover Specially designed for LED Floodlight luminaire with energy saving and advance optical system conforming to CAT Part No JETAIRISFLS140WLED730SYMLTG of Havells and equivalent in Bajaj/ Wipro/Phillips complete all as specified and as directed by Engr-in-Charge.

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.

Taking down old unserviceable / worn out aluminium sub main of any type and size

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC rigid conduits 20 mm or higher dia as reqd at site,totally concealed in walls/floors/ceiling including all conduit accessories / fittings / function / junction boxes / inspection covers etc.,heavy duty ISI marked,mild steel concealed sunken boxes, 1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches / sockets, etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- [Note:- Making good of disturbed surfaces will be done by contractor without any claims.]

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC rigid conduits 20 mm or higher dia as reqd at site,totally concealed in walls/floors/ceiling including all conduit accessories/fittings/function/junction boxes/inspection covers etc.,heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets,etc,including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 amps sockets outlet point on independent board. (Note:- Making good of disturbed surfaces will be done by contractor without any claims.)

S&F piano type switch 5 amps single pole, 240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals,240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F switch socket outlet,combination multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb complete etc. (Make- Philips / Wipro / HPL)

S&F in replacement of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as directed

M & L for submain wiring complete with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable contineous copper earth wire,1100 volts, FRLS grade in and including PVC conduit for concealed including copper earth wire 4 Sqmm complete all as directed. [Note :- (i) 2 runs of 6 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.) (ii) Making good of disturbed surfaces will be done by contractor without any claims.]

S&F MCB DB TPN l 4 way TPN double door, with 200 A rated busbar 415 Volts,recess mounted/wall mounted all as specified and directed by Engineer in charge. (Make :- Legrand,Scenider,HPL)

S&F MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 V,recess mounted all as specified and directed by engineer in charge. (Make :- Legrand / Scenider / HPL)

S&F MCB TPN 63 amps,10KA, 415 Volts 'C' series complete all as specified and as directed.

S&F MCB SP 6-32amps,10KA,'C' series complete all as specified and as directed.

S&F MCB SPN 10-40 amps,10KA, 240V,'C' series complete all as specified and as directed.

Taking down ceiling fans/Exhaust fan/wall fan safely from the site and deposited to store for keeping in safe custody and after completion of work cleaning,lubricating, spray painting one coat with synthetic enamel paint, writing MES No., replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations.

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver,glare free,smooth light distribution conforming to CAT Part No.Garnet 20 W LED (D532065) of Wipro or of equivalent in Havells / HPL / Philips complete all as specified and as directed.

Supply and fixing Integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories conforming to Cat Part No : HPLLEDSL3060S of HPL or of equivalent in Wipro/phillips/Havells/Fortune Art all as specified here-in-after including taking down old fitting.

shiva traders

Gauri Associates