Construction of Control Room Building extension ,Providing foundation concrete structure, Equipment Plinth, Plinth for Breaker, Transformer Plinth, Cable Duct and other Civil related works for the establishment of 110 22 kV SS at Maravanmadam

Amount

Civil works

Clearing juliflora jungle with uprooting and dispose them away from the site including all cost of all lead, lift etc., complete

Earth work execavation in all type of soil including initial lead of 10m and lift of 2m.

In hard stiff clay stiff black cotton hard red earth shales murram gravel stoney earth earth mixed with small size boulders and hard gravelly soil with initial lead of 10m and lift of 2m.

In soft disintegrated rock, laterite not requiring blasting.

In mediun rock and dense medium rock not requiring blasting.

In hard rock measured in solid including blasting and stacking.

Providing antitermite treatement in 4 stages (I). immediately after earthwork excavation and before laying foundation concrete. (ii). after refilling for sides of foundation. (iii). Before laying of flooring concrete and (iv). outside of basement upto 1m alround the building using termit 250ml for 5 litres of water.

Supplying and filling of M' sand in foundation and basement with well watering and consolidation as per STD specification including cost of all materials, lead, lift, etc., complete.

Supplying and filling of quarry dust including watering, consolidation, cost of quarry dust, lead, lift etc., complete.

Supplying and filling of gravel including watering and consolidation as per standard specification including cost of all materials, lead, lift etc., complete.

PCC 1:4:8 mix using 40mm HBG machine crushed metal for foundation with out form work including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

PCC 1:3:6 mix using 40mm HBG machine crushed metal for foundation without form work including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

PCC 1:2:4 mix using 20mm HBG machine crushed metal without form work including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

PCC 1:2:4 mix using 20mm HBG machine crushed metal with form work including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RR masonry in CM 1:6 mix using HBG stone for foundation and basement including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for raft including all cost labour materials, lead, lift etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for plinth beam with formwork including all cost labour, materials, lead, lift etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of all materials labour, lead, lift, curing etc., complete. Sulpha resistance cement to be used

Brickwork in CM 1:3 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of all materials, labour, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for continous lintel, tier slab, bed blocks, cover slab for staircase, water tank slab with formwork including all cost oc labour, materials, lead, lift, curing etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for sunshade 60cm projection 80mm thick at wall end and 50mm thick at free end and loft slab with formwork including all cost labour, materials, lead, lift, curing etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for columns & beam with formwork including all cost labour, materials, lead, lift, curing etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

Flooring with PCC 1:5:10 mix using 40mm HBS machine crushed metal for flooring including cost of materials lead lift labour curing etc complete. Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for roof slab concrete with formwork including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement Sulpha resistance cement to be used (By using mixer machine and vibrator) 100 mm thick

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for roof slab concrete with formwork including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement Sulpha resistance cement to be used (By using mixer machine and vibrator) 125mm thick

Plastering with CM 1:3, mix 20mm thick over the flooring with smooth finish and thread lined immediately after laying flooring concrete including all cost labour materials lead lift curing etc complete.

Plastering with CM 1:5, mix 12mm thick for inside and outside walls including all cost labour materials lead lift etc complete.

Plastering with CM 1:3, mix 12mm thick for ceiling including all cost labour materials lead lift labour curing etc complete.

Pointing with CM 1:3 for RR masonry including cost of materials labour lead lift etc complete

Providing weathering course with one course of cool proof tiles of size 25x25x2cm embeded in CM 1:3 12mm thick and pointed with mortor mixed with crude oil 10% by weight of cement and pointed with the same oil mixed CM 1:3 used over a bed of brick jelly lime concrete of 80mm thick with ratio of 32:12.5 etc (No sand) with the required slope and beaten with wooden beaters, cost of all materials curing etc complete.

Providing projected border of 7.5 cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost all materials lead lift curing etc complete.

Providing projected border of 20cm width for plinth beam in CM 1:3 mix 20mm thick including cost all materials lead lift curing etc complete.

Supplying and fabricating and placing in position RTS (ACRS) steel reinforcement for RCC works including labour for cutting bending tying and Fixing in position as per specification including cost all materials, lead, lift, cost of binding wire etc., complete.

Manufacturing and supplying of steel door using 40x40x6mm for outer frame 25x25x6mm for shutter frame with MS flat 25x6mm 3nos and for panels with 18swg MS sheet with bolts, washers, hinges 12mm dia tower bolt of 200x38x2.40mm at top and 150x38x2.4mm at bottom and one no 250x16mm aldrop etc complete as per standard drawing and specn Steel door of size 1.00 x 2.20m. (Single leaf)

Manufacturing and supplying of steel windows using 35x35x5mm and 35x5mm T angle for frame 25x25x3mm for shutter frame with 18swg MS sheet, 10 Nos. of 12mm dia MS bars with locking arrangements etc complete as per STD drawing and specn.

Providing PVC downfall pipe using 110mm dia 4KSC PVC pipe and PVC clamp line supreme etc including fixing SWR washer type door bend and shoe in correct postion and connecting from the roof slab including cost of all materials labour transport lead lift etc complete including SWR accesries and washers.

Flooring with approved Vertified tiles over cement mortor 1:3 12mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete.

Dadooing with glazed tiles of best quality of approved make Johnson Neycer etc over 1:3 12mm thick plastering including cost of all materials labour lead lift etc complete.

Providing and fixing sanitary fittings consisting of Neycer/ Parry ware of water closet single 60cm with P or S trap connecting with PVC ventilating shaft and Y bend complete including cost of all materials lead lift etc complete.

Supplying and fixing 100x75mm PVC floor trap in bath room with one PVC door bend , shoe of 50mm dia including cost of all materials lead lift etc complete

Supplying and fixing of HDPE hose of fine / flow TEL make ISI with connecting specials including the cost of all materials, welding, lead, lft etc., complete 32mm dia pipe

Supplying and fixing of HDPE hose of fine / flow TEL make ISI with connecting specials including the cost of all materials, welding, lead, lft etc., complete 25mm dia pipe

Supplying and fixing of HDPE hose of fine / flow TEL make ISI with connecting specials including the cost of all materials, welding, lead, lft etc., complete 15 mm dia pipe

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete. 32mm dia

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete. 25mm dia

Engraving the month and year of construction in the plinth of the building including cost of granite stone labour fixing charges etc complete.

Supplying, cutting, fabricating and fixing of MS / GI angles, Chennel and Chequired plates to the required size for cable duct including the cost of materials, labour, lead etc., complete.,

MS/GI angles

MS chennel 100x50 mm

Chequire plate 6 mm thick

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make). (SD 173)

Wiring with 2 x 1.50 sqmm PVC unsheathed SC copper cable of 650V grade in suitable concealed PVC rigid pipe in wall or ceiling with PVC accessories with T.W switch box in flush with wall covered with hylam sheet of 3mm thick with painting of suitable colour with continous earthwire connection of 14 SWG TC wire for light points and fan points.

Wiring with 2 x 4 sqmm PVC unsheathed SC copper cable of 650V grade in suitable, PVC rigid pipe in wall or ceiling with PVC accessories with 150mm x100mm x113mm T.W switch box in flush with wall covered with 3mm tk hylam sheet for 15Amp 3 pin flush type non interlocking C.S plug including pin top with painting of suitable colour with continous earthwire connection of 14 SWG TC wire for power plug points.

Supply and run of 2 of 4 sqmm PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC pie concealed in wall and ceiling with continuous earth wire 14 SWG TC wire for power pulg point on wall and ceiling with reputed make switch boxes etc. complete.

Supplying and fixing of 5 amps 3 pin socket in the existing switch including 3 pin top.

Supplying and fixing of 32 amps ICDP switch of 60 CV with phase and nuetral on suitable TW board with earthing

Earthing as per standard specification complete in all respects with necessary masonry works.

Supplying and fixing of precast slab in RCC 1:1.5:3 mix, using 12 to 20 mm HBG metal for cub-board slab including cost of all materials, lead, lift etc., complete.

Supplying of 20mm dia GI pipe and providing service connection including all cost of board, fuse carrier, materials such as screw, labour etc complete.

Manufacturing and fixing in position of anodised aluminium glazed door using 101.60x44.45x2.10mm box section @ 1.608kg/m and inner frame of 53.70x44.45x 2.30mm @ 1.238 kg/m for shutter bottom section 83.50x44.45x2.40mm @ 1.679 Kg/m, divider and top of frame 47.62x44.45x2.17 @ 1.072 Kg/m glazing clips of 17.30x19.0x0.60mm @ 0.083 Kg/m , floor gear glazing clips rubber beadings hinges handle 5mm thick CGL make cooling glass including cost of materials labour lead lift etc complete. Door size 1.20 x 2.40m (single leaf).

Supply and fixing UPVC (Un-Plasticized Polyvinyl cholirde) windows of casement type(Open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforecement with GI/1mm 125GsM and 100% corrosion free, the profiles are multi-chambered sections with wall thick of 2mm EPDM rubber covered with over all the edges of frame and shutter the shutter will be provided with espag multi power point locks ans also it operates as handle. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the EE before use on work cost of all materials, lead, lift etc., complete.

Manufacturing and fixing in position of anodised aluminium partially glazed door using 101.60x44.45x2.10mm box section @ 1.608kg/m and inner frame of 53.70x44.45x2.30mm @ 1.238 kg/m for shutter bottom section 83.50x44.45x2.40mm @ 1.679 Kg/m, divider and top of frame 47.62x44.45x2.17 @ 1.072 Kg/m glazing clips of 17.30x19.0x0.60mm @ 0.083 Kg/m, floor gear glazing clips rubber beadings hinges handle 5mm thick CGL make cooling glass including cost of materials labour lead lift etc complete. Door size 1.20 x 2.40m (single leaf).

Manufacturing and fixing in position of anodised aluminium panneled door using 100x44x2mm box section for frame and 95x44x2mm for shutter bottom style and 65x44mm section for other side style with glazing clips rubber beadings hinges handle with 12mm thick one side laminated MDF duratuff exterior Board single leaf of door size 1.0 x 2.20m.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl cholirde) door shutter made of chamber hallow plastic sections of size 200mmx20mm thick and PVC extracted shutter frame of size 24mmx50mm including necessary hard make PVC shutters including cost of oxidised aluminium fittings as per drawing and specification including cost of all materials lead lift etc complete. size 0.80 x 2.00m

Supplying and fixing of steel ventilators of size 0.75x0.45m fully glazed louver type as per standard specification with MS angle 35x35x5mm for frame and glass 4mm thick including providing 12mm dia bar including cost of all materials lead lift etc complete as per standard drawing and specn as well as as per the direction of Engineer at site. Ventilator of size 0.75x0.45m.

Supplying and fixing 600x450mm mirror including all cost of materails lead lift etc complete.

Supplying and fixing of wash basin of size 550x400mm of approved quality Neycer/ Parry ware including cost of wash basin with pedestal cock fixing with rug bolt and nuts, 15mm dia PVC connecting hose and outlet using 40mm dia PVC waste pipe , CP valve, tap etc complete.

Supplying and fixing of 110 mm dia PVC pipe including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC bend including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC TEE including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC pipe of 3m height with cowl for ventilation shaft including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size 90cm and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete

Supplying and fixing of PVC shower and Nickle control valve complete

Supplying and fixing in position of 15mm dia brass screw down bib cock of best quality including cost of materials lead lift labour etc complete.

Supplying and fixing musical quartz type wall clock of size 30cm in dia of approved quality such as Ajantha/Seiko/Citizen etc including cost of transport fixing charges etc complete.

Supply and fixing of 4'x36W single industrial type flu. fitting complete with Electronic choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. (SD 87)

Supply and fixing of 18 W CFL point. (SD 77)

Supply and fixing of Stree light fitting with CFL with complete set

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall. (SD 112)

Supplying and fixing of 1200mm sweep AC ceiling fan with electronic requlator with 300mm down rod on the existing clamps of approved quality of Crompton/Rally/ usha/bajaj including cost of all materials lead lift etc complete.

Colour washing two coats with approved cement paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats with approved exterior emulsion over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats with Oil Bound Distember over one coat of white cement primer for inside wall including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats with water based plastic emulsion over one coat of white cement primer for inside wall including cost of all materials, labour, lead, lift etc., complete.

White washing two coats with best quality of shell lime and robin blue bigments over primer coat for ceilings, beams, slabs and sunshades including cost of all materials, labour, lead, lift etc., complete.

Painting two coats to the all exposed faces of steel works over one coat of primer with approved enamel paint including cost of all materials, lead, lift etc., complete.

Supplying and filling with 40 mm metal as per STD specification including cost of all materials, lead, lift etc., complete for dispersion trench.

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) S Type chair

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Three drawer steel table

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Steel side rack open type 4 self

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Steel half bench

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Operator Table 6'x5'

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) PVC Chair of reputed make

Supplying fabricating and palcing in position MS. Angle of size 65x65x6mm for fence post including cutting, bending and trilling the holes as directed by the site engineer including transporting units etc., Complete.

Supplying fabricating and palcing in position MS Flate of size 50 x 5mm thick for holding chain link with post and digonal brazing @ every 15m intervals including cutting, bending and trilling the holes as directed by the site engineer, transporting units etc., Complete.

Supplying and tensioning of 4mm dia GI wire fabric of 50mm square (chainlink fence) including cost of 4mm dia GI wire fabric of 25mm square (chainlink fence) labour charges for laying and tensioning cost of GI binding wire, required GI bolt and nuts etc complete.

Supplying and fixing Eye bolt including all cost of materials, paiting, labour charges etc., complete

Supplying and fixing of Main gate and wicket gate including cost of angle, cost of two coat paint over one coat of primer paint, labour, lead, lift,transportation etc., Complete.

Writing the name of sub station, place with TANGEDCO emblem both in English and Tamil in the wingwall with initial coat paint and finishing including all cost of labour, paint etc., complete

Drilling 150mm dia deep borwell in all class of soil including hard rock etc.,charges for inserting in the drilled bore holes,welding the casing pipe etc.,transporting to site and supporting charges for site etc.,complete

Supplying, laying and jointing of 150mm dia PVC casing pipe of 60 kg/cm² including cost of all lead,lift labour,materials etc.,complete

Supplying and erection of 3 Phase 3HP compressor pump set of crompton/ELGI compressor and ELGI/Suguna motor make of good quality of ISI including handling charges lead, lift etc.,complete

Supplying and fixing in position 15 Amps L&T starter and bush button type including cost of material,lead,lift, labour, etc., complete.

Supplying & fixing of M.S rail (90 lbs) for transformer plinth including cost of rail, cutting the rail to the required length and welding grip rods for the rails, transport charges, labour for fixing and handling, T&P etc., complete.

Supplying and filling with 25mm metal as per standard specification inlcuding cost of all materials, labour, lead, lift, etc., complete.

Supplying and placing of 60 cm inner dia, 30 cm height and 5cm thick earth trough in two piece with top cover including necessary earth work excavation including cost of labour, lead ,lift, etc., complete.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibrator roller to acheive the desired density including cost of all materials, lead, lift, hire charges for machinery, fuel etc., complete as per clause 406 of Morth Rev-5.

SGST & CGST (If applicable quote the value, if not enter '0')

IGST (If applicable quote the value, if not enter '0')

S CHELLADURAI CONTRACTOR (BID ID -1485745)

petchimuthu (BID ID -1485573)