Construction of New Anganwadi Building at ammanpettai in Melur Panchayat.

Amount

Construction of Anganwadi building at Ammanpettai in Melur Panchayat.

Earth work excavation and depositing on bank with initial lead and lift in hard stiff clay soil and hard gravel soil as per standard specification SS20 B for narrow foundation.

Collection and supply of GOOD EARTH and filling including all cost & conveyance to worksite and labour charges etc complete.

Supllying filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Brick Work in Cement Mortor 1:5 mix using courntry bricks including cost and conveyance of all materials to site and all labour charges etc., complete

Reinforced Cement Concrete 1:1.5:3 mix for RCC using 20mm ISS BG metal including cost and conveyance of all materials to site including all labour charges for filling etc complete.

Supplying and fabrication of steel including cost and conveyance and all labour charges etc., complete.

Centering for Sides and soffits including cost and conveyance and all labour charges etc., complete. BGL

Centering for Sides and soffits including cost and conveyance and all labour charges etc., complete.AGL

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Paving the floor with best approved quality fine polished shahabad stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicificationlabour charges etc complete

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing with glazed tiles of size 300x200x6mm including cost and conveyance of materials to site and all labour charges etc complete.

Plastering Inside with cement mortor 1:5 mix 12mm thick including cost of conveyance of all materials to work site and all labour charges etc., complete

Special ceiling plastering with cement mortor 1:3 mix to 10mm thickness including cost and conveyance of all materials to site and all labour charges etc. complete

Fabrication and supply of mild steel Door of size with single leaf outer frame made of size with any 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fullycovered with 18 G plate etc complete.

Fabrication and supply of mild steel Window of any size with single leaf outer frame,mullion section made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

White washing with two coats including cost and conveyance of all materials to site and all labour charges etc., complete.

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all lobour charges etc complete (Inner wall)

Painting two coats with Exterior emulsion over one coat of primary coat including cleaning preparing the surface

Painting with Oil Paint in two Coats Shade & quality as directed by the departmental engineer in charge including cost and conveyance of all materials and labour charges etc., complete

Cost and supply of RCC jolly including all cost and conveyance of all materials to site and all labour charges etc complete.

Supply and delivery and fixing of Cudappa Slab including all cost and conveyance and all labour charges etc complete

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 24

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 154

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 62

Supply and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 83 ]

Supply and fixing of water tight Bulk Head fitting with guard (Philips / Bajaj / Crompton / Klite) suitable for incandencent lamp and 60W bulb (SD N0.83)

Supply and fixing of 1200mm AC ceiling fan with stepped electronic 300w regulator with 300mm down rod on the existing clamp

Supply, delivery and fixing of HDPE Tank with ISI marking (500 litre capacity ) inluding transportion fixing etc., complete.

Supply, delivery and fixing of Indian type water closet etc., complete.

Supply, delivery and fixing of European type water closet etc., complete.

Provision for Rain water Harvesting pipe & Specials

Provision for Water supply arrangement

Provision for Ramp Hand rails for SS materials including all cost etc

provision for Name board Charges etc., complete

provision for Photographic charges etc

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Karthik Kanagavel (BID ID -1300631)