Contruction of Godown 1020MT and Machinery Shed 112.79 Sq.Mtr at Shelu Bajar

BUILDING STRUCTURE

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) By Mechanical Means WareHouse : 164.70 Machine Shed : 21.60 Total :

Excavation for foundation in earth, soil of all types, sand, gravel, and soft murum, including removing the excavated material up to a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting, etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means. WareHouse : 164.70 Machine Shed :25.92 Total :

Providing soling using 80mm size trap metal in 15cm layer including filling voids with crushed sand/grit, ramming, watering, etc. complete. WareHouse : 139.03 Machine Shed : 15.30 Total :

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete. WareHouse : 397.85 Machine Shed : 61.20 Total :

Providing pre-constructional anti-termite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorpyrifos per one square metre of vertical surface area covering 10 years guarantee on bond paperWareHouse : 828.30 Machine Shed : 0.00 Total :

Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete ,with fully automatic microprocess or base dPLCwith SCADA enable dreversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) WareHouse : 65.69 Machine Shed : 2.16 Total :

Providing and laying in situ cement concrete of M-20 grade of trap / granite/quartzite/gneiss metal for R.C.C. work like raft, grillages, strips, foundations and footings of R.C.C.columns and steel stanchions including bailing-out water manually, including centering formwork of plywood / steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement morter 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete. (Excluding reinforcement) The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed) Spec.No.:Bd.F.2 Page No. 298 /IS 456 (1978) WareHouse : 45.37 Machine Shed : 06.48 Total :

Sand :- i) Fineness

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) WareHouse : 21.80 Machine Shed : 6.98 Total :

Providing and laying Cast in situ/Ready Mix cement concrete in M-15 of trap / granite/gneiss/ quartzite metal for R.C.C. COPING of required thickness in positionas shown on the drawings or as directed by Engineer -in-charge including steel centering, plywood / steel form work, steel props, laying/ pumping, compaction ,finishing uneven and honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarp aulin etc. with fully automatic microprocess or based PLC with SCADA enable dreversible Drum Type mixer/ concrete Batchmix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) WareHouse : 2.14 Machine Shed :0.00 Total :

Providing and casting in situ cement concrete of M-20 grade of trap granite / quartzite / gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings or as directed including fixing plastic cover block of requird size at 27 Nos in per 10 Sqm to reinforcement to give a clear cover of 15mm in RCC slabs, fixing fan hook box of 100mm diameter PVC or MS material with required depth with holes or notches as required, bottom with 12mm diameter M.S. bar bend to shape with hooked ends for fan hook and painting to exposed surface, centering, formwork of steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Wooden planks / shuttering will not be allowed). Bd.F.8 Page No. 302 / IS 456:2000 WareHouse : 3.24 Machine Shed : 0.00 Total :

Providing and fixing rolling shutter fabricated from steell at hsofminimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fastarr angements, M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size attopand safety device sincluding mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade castir on or mild steel and one coat of redlead primer etc. complete.(I.S.62481979) (Without mechanical gear) WareHouse : 19.20 Machine Shed :9.30 Total :

Providing Brick masonry in cement mortal 1.6 using second Class Burnt Bricks in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually, striking joints on unexposed faces ,watering and scaffolding complete Bd. G. 1, Page No.313, WareHouse : 10.83 Machine Shed : 5.94 Total :

㌠挠牯⁥〱猠⹱浭椠牴湥档慷汬᤮慭楫杮琠敨琠敲据⁨湩猠楯⡬慭楫杮琠敨琠敲据⁨湩洠牵畲湡⁤慨⁤潲正/匀灵汰楹杮愠摮氠祡湩⁧㔷浭搠慩䜠䤮瀠灩⁥䈨䜩䅒䕄/匀灵汰楹杮愠摮氠祡湩⁧㔲浭搠慩䜠䤮瀠灩⁥䄨䜩䅒䕄^匀灵汰楹杮‬攠敲瑣湩⁧栠慥祶搠瑵⁹汦湡敧挠扡敬朊慬摮摥′潴㐠挠牯⁥⸲〵煳洮⽭′潴㐠挠牯⁥‴煳洮ね⁰潰湩⁴楷楲杮映牯猠牴敥⁴楬桧⁴″潣敲ㄠ㔮猠⹱浭Z匀灵汰楹杮†…攠敲瑣湩⁧慷整⁲牰潯⁦潰摷牥挠慯整⁤楤瑳畲畢楴湯戠慯摲㐠眠祡㈠㙸䄠灭‮⁓⁐䍍㑂♓⁅楷桴洠楡獮倠䍖甠慮浲畯摲⁥慣汢⁥″潣敲㈊㔮猠⹱浭A匀灵汰楹杮愠摮攠慲瑣湩⁧湡⁤慭歲瑩湩⁧䍍⁂景搠畯汢摥瀠汯づㄠ‶浡⹰$猀灵汰祩湩⁧桳捯火潲景琠灹⁥慨摮氠浡幰畳灰祬湩⁧湡⁤牥慥楴杮䰠䑅猠牴敥⁴楬桧⁴楦瑴湩੧畳瑩扡敬映牯㈠琰㔲眠‬湩汣摵湩⁧瑳敲瑥氠杩瑨%猀灵汰楹杮愠摮攠敲瑡湩⁧䥇攠牡桴瀠慬整(匀䔦猠敨瑥洠瑥污漠敮眠祡攠据潬獵⁥潦⁲捭䅢潰湩⁴楷楲杮映牯氠杩瑨戠汥獬眠瑩⁨ⴲㄠ㔮猠浱噐⁃湩畳慬瑴摥眠物䙥潰湩⁴楷楲杮映牯椠摮灥湥敤瑮瀠畬⁧楷桴㈠ㄭ㔮猠浱⹭倠䍖椠獮汵敬整⁤楷敲2瀀楯瑮眠物湩⁧楷桴†ⴲ⸱‵煳浭‮噐⁃湩畳汬瑥摥眠物ၥ♓⁆䙃⁌慬灭ㄠ圱*猀灵汰楹杮愠摮攠敲瑡湩⁧慭楲敮瀠祬潷摯ㄠ洹ᡭ⁐…⁆卍戠硯獥漠⁦㘱猠杷®猀灵汰楹杮愠摮攠敲瑡湩⁧敲祤琠獵⁥敲牴景瑩ㄠ‸䕌⁄㠱㈭‰啔䕂䥌䡇⁔楷桴瀠汯⁹慣牡潢慮整戠摯ⱹ栠瑡猠湩Ⱬ椠瑮来慲整⁤晨攠敬瑣潲楮⁣牤癩牥挠浯汰瑥⁥湡⁤潣灭瑥慩汢⁥潴吠⼸ㅔ′䕌♄⁓…⁅散汩湩⁧慦㠴•楷桴猠整⁰楤浡牥M猀灵汰楹杮愠摮攠敲瑡湩⁧潦牵瀠汯⁥湩畳慬整⁲湯祬猊楷桴瘠牥楳景䴠䉃漠⁦〴愠灭1匀☠䔠㐠洰楤⁡䥇瀠灩⁥⸲䴵氠湥瑧⁨景攠牡桴瀊慬整"倀☠䘠挠癯牥洠摡⁥景眠物⁥敭桳樠污ṩ⁓…⁅楤杮搠湯⁧祴数挠污敢汥+匀☠䔠㐠砢∴攠潰祸挠慯整⁤″慷⁹楪据楴湯戠硯8匀☠䔠猠整汥琠扡汵牡猠慷敧⁤潰敬ㄠ㤳㜮ㅸ㐱㌮㡸⸸‹浭搠慩䨮牃獵楨杮嘠污敵䌯浯牰獥楳敶匠牴湥瑧ⱨ†慗整⁲扁潳灲楴湯☠匠数楣楦⁣片癡瑩ⱹFȈ䴀〲䌠乏剃呅㩅䌠湯牣瑥⁥楍⁸敄楳湧⠠楗桴愠汬吠獥獴漠戠獡捩洠瑡牥慩獬)᠀฀ᤀ㤀ࠀ㉍‰佃䍎䕒䕔›潃灭敲獳癩⁥瑓敲杮桴传⁆⹃⹃䌠扵⁥匨瑥漠⁦3᠀฀ᤀ䄀ࠀㅍ‰佃䍎䕒䕔›潃灭敲獳癩⁥瑓敲杮桴传⁆⹃⹃䌠扵⁥匨瑥漠⁦″畣敢⥳.᠀ഀᤀ똀ࠀ䵔⁔呓䕅⁌›†††††††††††††††††††††††††††††††††††⠠敔獮汩⁥瑳敲杮桴‬Ⱕ䔠潬杮瑡潩Ɱ夠敩摬匠牴獥ⱳ敗杩瑨倭牥䴠瑥牥‬敂摮⼠删扥湥⁤敔瑳ਬ牐潯⁦瑓敲獳⤮ LȈ䴀牵浵㨠‭楩 瑁整扲牥⁧楌業⁴楩⥩䐠湥楳祴漠⁦潣灭捡整⁤慬敹楲⥶倠潲瑣牯吠獥t᠀Ԁᤀ嘀ࠀ
楂畴敭敐敮牴瑡潩Ɱ匠景整楮杮倠楯瑮‬汆獡⁨…楆敲倠楯瑮‬灓捥晩捩䜠慲楶祴‬楖捳獯瑩⹹XĈ䴀呅䱁䜠⁲⁉…片䤠⁉杁牲来瑡獥†䥁⁖敔瑳‬片摡瑡潩Ɱ慗整⁲扁潳灲瑡潩敔瑳䌬畲桳湩⁧慖畬ὥᤀ㤀ࠀㅍ‵佃䍎䕒䕔›潃灭敲獳癩⁥瑓敲杮桴传⁆⹃⹃䌠扵⁥匨瑥漠⁦3᠀ഀᤀ謀ࠁ楆汬湩⁧湩瀠楬瑮⁨湡⁤汦潯獲眠瑩⁨灡牰癯摥攠捸癡瑡摥洠瑡牥慩湩ㄠ挵⹭琠〲浣‮慬敹獲湩汣摵湩⁧慷整楲杮愠摮挠浯慰瑣湩⁧瑥⹣挠浯汰瑥⹥ †††††††††††††††††††††††††††††††††慗敲潈獵⁥†›†㌲⸳㈹††††††††††††††††††††††††††††††慍档湩⁥桓摥㨠〠‰†††††††††††††††††††††††††††††††潔慴†††††††††㈺㌳㤮蘲ᨀ蜀ᔀ∀潃瑮慲瑣丠㩯†㈠㈰張佄坁彂㈱㤳㐹″

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough

to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. WareHouse : 399.84 Machine Shed : 177.84 Total :

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, etc. complete.WareHouse : 261.06 Machine Shed :126.76 Total :

Providing and applying white-wash in one coat on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. WareHouse : 261.06 Machine Shed : 00.00 Total :

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. WareHouse : 399.84 Machine Shed : 00.00 Total :

Providing and fixing steel ventilator fully glazed, partly fixed as per detailed drawing, with hot-dip zinc coating, including fabricating glazing with plain/obscured glass panes 5mm thick and approved type quality, and iron oxidized fixtures and fastening with guard square bars 12 mm, 10 cm c/c, and oil painting 2 coats, etc. Complete.WareHouse : 6.41 Machine Shed :7.68 Total :

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. WareHouse : 11.21 Machine Shed :1.38 Total :

PEB Structure Structural Steel E-350 ( JSW make)

Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position. WareHouse : 9.00 Machine Shed : Total : 9.00

Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases ,supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required for the complete work). WareHouse : 16.58 Machine Shed : 00 Total : 30.68

Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer in charge. WareHouse : 130.38.00 Machine Shed : 0.00 Total : 130.380

Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge WareHouse : 50.52 Machine Shed : Total : 50.52

Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge WareHouse : 78 Machine Shed : Total : 78

Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020 mtr wide & 1.7 mtr long. WareHouse : 8 Machine Shed : 3 Total : 11

Supply & fixing of 2mm thk polycarbonate sheet as per drawing & as directed by engineer in charge WareHouse : 30.72 Machine Shed : Total : 30.72

Supplying, fabricating, erecting and fixing in position of steel Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anti corrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. WareHouse : 0.00 Machine Shed : 3.5 Total : 3.5

Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.(Essar) Make) WareHouse : 6.63 Machine Shed : Total :

Royalty for Sand

Royalty for murum and Other material

Providing and fixing metacolor ,epoxy coating to match G.I Sheeting og 22 BWG ( 1 mm) over the ridge , hip pr va;;eu for meta color corrugated epoxy sheet roofing including fastening with G.I screw and bolt and lead and butumen washer etc. complete. WareHouse : 0.00 Machine Shed :17.46 otal : 17.46

BRICKS : Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks)

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct