PROVISION OF PLATFORM FOR DCN ANTENNA AND DG SET , PROVN OF VIEW CUTTER ON PERIMETER WALL FOR SECURITY PURPOSE AND PROVISION OF CABINET/ OTHER MISC WORK IN CERTAIN OMQS AT AFS MADH ISLAND UNDER GE(AF) THANE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out getting out in hard/dense soil ,complete all as specified and as directed by Engr-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Hard/Dense soil ,complete all as specified and as directed by Engr-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Soft/ disintegrated rock ,complete all as specified and as directed by Engr-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Hard rock ,complete all as specified and as directed by Engr-in-charge.

M&L for Cement concrete type D2 (1:4:8) (40 mm graded srone aggregate) in foundations, filling and mass concrete ,complete all as specified and as directed by Engr-in-charge.

Material and labour for reinforced cement concrete M-30 (Design mix) in foundation incl footings, etc ,complete all as specified and as directed by Engr-in-charge.

Material and labour for reinforced cement concrete M-30 (Design mix) slab supported on walls, and the like ,above top of footings, incl attached pillasters and butresses etc complete all as specified and as directed.

Material and labour for reinforced cement concrete M-30 (Design mix) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and labour for reinforced cement concrete M-30 (Design mix) for Columns, pillars, piers, posts and struts complete all as specified and as directed.

Formwork to sides of flat surface of concrete foundations, footings, bases of columns, raft and roof beams, sides and soffits (if any) of foundation and plinth beams; and similar work etc, vertical or to batter for rough finished surfaces ,complete all as specified and as directed by Engr-in-charge.

Formwork to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide ,complete all as specified and as directed by Engr-in-charge.

Form work to sides of pillars, posts, struts, piers, columns and stanchions ,complete all as specified and as directed by Engr-in-charge.

M & L for TMT bars 10 mm dia & over cut to length , bend to shape required , including cranking and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all specified and as directed.

M & L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binder cut to length , bend to shape required , including cranking and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all specified and as directed

M&L for moorum / red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering ,complete all as specified and as directed by Engr-in-charge.

Removing excavated material exc. 500m and n.exc 1.5 km and depositing where as directed ,complete all as specified and as directed by Engr-in-charge.

M&L for precast cement concrete block masonry with solid blocks, exc 10 cm in width and and setting in mortar, Type C1 (1:3:6) complete all as specified and directed by Engr - in - Charge.

M&L for Rendering, 20mm thick in two coats (15+5) in cement mortar 1:4 with using integral waterproofing compound finished even & smooth without using extra cement ( Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.).

Supply only liquid water proofing compound ,complete all as specified and as directed by Engr-in-charge.

M&L for finishing walls with Acrylic smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm) ,complete all as specified and as directed by Engr-in-charge.

M&L for Hardcore of gauge n.exc 63 mm deposited spread and levelled in layers n exc 15 cm thick, watered and rolled/ rammed to a true surface ,complete all as specified and as directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles ,complete all as specified and as directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any discrption not otherwise provided for ,complete all as specified and as directed by Engr-in-charge.

Formwork to flat faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter to rough finished surfaces of concrete all as specified and as directed.

M&L Cement concrete using type B2 1:2:4 (40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) ,complete all as specified and as directed by Engr-in-charge.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 all as specified and as directed ,complete all as specified and as directed by Engr-in-charge.

S&F Rolled mild steel Fe-410- W(Gde- E-250) quality- B in: Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) all as specified and directed by Engr - in - Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified ,complete all as specified and as directed by Engr-in-charge.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ,complete all as specified and as directed by Engr-in-charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or squarenut, n exc 5cm long ,complete all as specified and as directed by Engr-in-charge.

M&L Painting to new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats over a coat of red oxide primer ,complete all as specified and as directed by Engr-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.

M&L Painting to new steel surfaces of any description, n.exc 10cm in width or girth,not otherwise described and applying two coats over a coat of red oxide primer ,complete all as specified and as directed by Engr-in-charge.

S&F factory made single exstruded WPC (Wood polymer composite) solid door/ window ceosetory window & other frames/ chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K Value 58-60 (suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/ mm2 , modules of elasticyty 900N / mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer -in - charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note :- For WPC Solid door/ window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood polymer composite ) solid plain flush door/cupboard shutter of 18 mm size comprising of virgin polymer of K value 58-60 ((suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) f having minimum frame density of 650 kg/ cum, screw withdrawal strength of1800 N (Face) & 900N (Edge), minimum compressive strength of 50N/ mm2 , modules of elasticyty 850N / mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer -in - charge. Note Stainless steel butt hinges and necessary S S Screws shall be paid separately)

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with 30mm Width of flaps (when open) ,complete all as specified and as directed by Engr-in-charge.

Supply only stainless steel star headed full treaded wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88 mm nominal shank dia) n. exc 50 mm ,complete all as specified and as directed by Engr-in-charge.

S & F Extruded brass handles, fabricated type polished of 125mm size ,complete all as specified and as directed by Engr-in-charge.

S & F Locks, cupboard, grade I, size 50 mm of brass two levers ,complete all as specified and as directed by Engr-in-charge.

S & F Locks, drawer, grade I, size 50 mm of brass two levers ,complete all as specified and as directed by Engr-in-charge.

S & F Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc ,complete all as specified and as directed by Engr-in-charge.

S & F Magnetic catch suitable for cupboards ,complete all as specified and as directed by Engr-in-charge.

S&F single pole and neutral encloser with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts ,complete all as specified and as directed by Engr-in-charge.

M&L for sub main wiring with two single core 4 Sqmm PVC insulated FR multistranded flexible copper conductor cable 660/1100 Volts grade drawn in through flexible non metallic PVC conduit with and including PVC insulated 4 Sqmm single core cable and strand copper conductor as continuous eart wire in green color connected to common earth dolly ,complete all as specified and as directed by Engr-in-charge.

Jay Jyotirling construction co.

Vishal Builders