Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹4.7 L+₹21,289.02 (4.78%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹6.8 L+₹2.4 L (53.3%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
Noida
WELCOME MAINTENANCE OF SAILORS MD ACCN AT COAST GUARD NOIDA UNDER AGE I CG NOIDA
2022_MES_563519_1
AGE I CGN 30 22 23
Open Tender
Civil Works
Item Rate
300 days
Noida
E a i
7 documents required · 7 mandatory
₹500
AGE I CG
₹16,000
4 Mar 2023
17 Nov 2022
17 Dec 2022
17 Nov 2022
15 Dec 2022
1 Dec 2022
Amount
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc
Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc.
Demolition of cement concrete (unreinforced in ground floors & pavings n.exc 15 cm thick (below or above ground level)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises
Demolition of reinforced cement concrete of any description (reinforcement cut as reqquired to facilitate demolition)
Taking down chowkhats or frames not exc. 1.5 Sqm but with shutters (without taking off shutters from the frames)
Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each
Taking down shutter of any description n exc 1.00 sqm each
Taking down shutter any description area exceeding 1 sqm but not exceeding 2 sqm each
M&L for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified
M&L rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and directed
M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar 1:3 finishing on brick or concrete surfaces finished even & smooth without using extra cement in ceiling complete.
M&L for RCC 1:1.5:3 M20 type B1 (using 20 mm graded aggregate) as in slabs supported on walls, beams, and columns etc complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slabs, floors, slabs , landing and similar works etc all as specified as directed not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete
M&L for MS TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia.
M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. all as specified.
S&F vitrified ceramic dark shade coloured tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 all as specified and directed
M&L for vitrified /Granite /Marble /wood tiles textures ceramic 10 mm tiles in vertical surfaces n exc 0.36 Sqm, over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match .
M&L for Non skid ceramic coloured joint free tiles 400mm x 400mm 7to 8mm thick, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.
M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x250x7mm/450x350x7mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match all as spd .
M&L for 10mm thick rendering for backing of tiles in CM 1:3 on fair faces of brick work or concrete surfaces.
M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match thick shade of the slab including rubbing and polishing laid over 15mm thick screed bed in cm (1:4) complete all as spd.
All as per item No 23 above here-in-before but on vertical surfaces of walls /skirting/dado etc over 15 mm thick backing coat in CM 1:4 complete all as spd.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in cm 1:4 all as spd & directed.
M&L for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded aggregate ) as in sub-bases, sub-floors, floors and paving etc for receiving floor finishes etc.
M&L for machine pressed precast concrete interlocking paver block any shape and size confiRming to IS 15658 -2006 of 60 mm thick M -35 grade with grey cement and pigment all as specified and directed.
M&L for sand filling 50 mm under floors or foundation, and receiving to interlocking tiles, complete.
S&F 2nd class hard wood, plain, solid, straight chowkhats and frames,wrought,framed rebated on the solid rounded or chamfered put together with glue pinned at joints.
S&F 35mm thick 2nd class Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a)
S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F Bands, straps, supports or staysfor rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chain hand made sliding bolts; clamps;hold fasts; wall ties; hooks forhanging fans; plain angle cleats for securing purlins to woodtrusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles confoRming toFe-290 Gde-E-165 complete all as specified and as directed by engr-in-charge
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S & F Stainless steel butt hinges fixed type 100mm size including necessary fittings,SS Screws complete all as specified and as directed by engr-in-charge.
S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F in repair aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F aluminium anodised barrel tower bolts of extruded section of size 200 mm, all as specified and directed
S&F in repair aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed
S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed
S&F in repair aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed
S&F extruded aluminium alloy handle, fabricated type anodised of size 150 mm complete all as spd and directed.
S&F in repair extruded aluminium alloy handle, fabricated type anodised of size 150 mm complete all as spd and directed.
S&F in repair extruded aluminium alloy handle, fabricated type anodised of size 100 mm complete all as spd and directed.
S&F in repairs butt hinges 100mm medium weight cold rolled mild steel.
S&F in repair butt hinges 100mm medium weight cold rolled mild steel.
S&F in repair butt hinges 75 mm medium weight cold rolled mild steel.
S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete.
Taking up or down 15mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
Taking up or down 20 mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
S&F 15 mm bore GI tubing med grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors
S&F 20 mm bore GI tubing med grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors
Fixing only 15mm GI tubing in any grade to walls and ceilings or laid in floors
Fixing only 20mm GI tubing in any grade to walls and ceilings or laid in floors
S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&Fin repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall.
S&Fin repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&Fin repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls.
S&F 75mm bore PVC (SWR) bends any radius
S&F 110mm bore PVC (SWR) bends any radius
S&F 110mm PVC (SWR) vent cowl
S&F 75mm PVC (SWR) vent cowl
M &L for preparing plastered or un plastered NEW SURFACE of walls and applying two coats of cement base paint and priming with alkali resistant priming paint on walls
M&L for applying 3 mm thick wall care putty and two coats of oil bound distemper on NEWLY plastered surfaces of wall including preparation of surfaces complete
M &L for preparing plastered or un plastered NEW surface of ceiling and applying three coats of white wash.
M&L for applying 3 mm thick wall care putty on OLD SURFACES of wall and including two coats of oil bound distemper on plastered/ unplastered surfaces of wall including complete removal of existing treatment.
M&L for applying two coats of white wash on OLD SURFACES of ceiling including complete removal of existing treatment.
M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over a coat of pink primer to new surfaces including preparation of surfaces, over 10cm width or girth.
M&L for two coats of synthetic enamel paint on NEW STEEL surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including roof CGI painting complete all as specified and directed.
M&L for two coats of synthetic enamel paint on OLD WOODEN SURFACES including preparation of surfaces over 10cm width or girth.
M & L for preparation of OLD STEEL SURFACES over 10 cm width or girth and applying two coats of synthetic enamel paint including roof painting complete all as spd.
M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.
M/S R.S. Builders
Shree Ganpati Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .