Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC Being overall rate reasonable | |
| 2 | L2₹28.3 L+₹1.6 L (6.18%)Rejected-Finance AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹29.9 L+₹3.3 L (12.2%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹35.2 L+₹8.5 L (32.1%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹35.7 L+₹9.0 L (33.8%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
1 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
COMPREHENSIVE REPAIRS MAINTENANCE AND WELCOME MAINT TO SF ORs JCOs ACCN AT ENGINE HOUSE ROAD HB ROAD ELPH ROAD CLARK ROAD ARJUN MARG DUNCAN ROAD RC ROAD BURR ROAD OVERSEER ROAD AND ACCN OF STN HQ KIRKEE IN ZONE A AREA AGE BR I C UNDER GE C KIRKEE.
2022_MES_522222_1
8636/E8 OF 2022-2023
Open Tender
Civil Works
Item Rate
270 days
Zone A area
Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹90,000
Yes
25 Jun 2022
6 May 2022
3 Jun 2022
6 May 2022
1 Jun 2022
20 May 2022
6 May 2022 - 19 May 2022
60 days
Amount
NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.
NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.
Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for rendering 10 mm thick on concrete surfaces in CM (1:6), finished with sagol finish on plastered surfaces of internal wall, complete all as specified and as directed.
Material and labour for rendering 20 mm thick in two layers on stone masonry surfaces in CM (1:4), finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces including finishing the surfaces fair and even using water proofing compound all as specified and directed. NOTE:- (i) Plaster work shall be in four storey building on wall surfaces. (ii) Water proofing compound shall be measured and paid separately.
Material and labour for rendering 5 mm thick on concrete surfaces as in ceiling in CM (1:3), finished with sagol finish on plastered surfaces of internal wall, complete all as specified and as directed.
Supply only integral liquid water proofing compound complete all as specified and as directed.
Material and labour for making holes in concrete or tiles surface, fixing the metallic packer for injecting hydrophobic PU foam and sealer as per manufacture's instuctions (average one metallic packer per sqm) complete all as specified and as directed. MAKE:- Build core chemicals / MC bouchmie / Pidilite or techno commercially equivalent makes approved.
Material and labour for CORESEAL 357A/ CORESEAL 357 CAT (forming agent for carring out non desrtuctive waterproofing treatment of sunken portion slab, floor and wall of bath, WC, WHB and floor trap (combined unit) by using construction chemical methods such as HYDROPHOBIC PU GROUTING including cleaning of surfaces with wire brush detecting the sources of leakages complete all as specified and as directed. MAKE:- Build core chemicals / MC bouchmie / Pidilite or techno commercially equivalent makes approved.
Material and labour for second course injection of CORESEAL 135A/CORESEAL 135B (sealing agent) complete all as specified and as directed. MAKE:- Build core chemicals / MC bouchmie / Pidilite or techno commercially equivalent makes approved.
Dismantling of floor hearth or wall tilling / Kota stone / Granite / interlocking tiles including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.
Material and labour for 25mm thick PCC 1:2:4 type B-0 (1:2:4) using12.5 mm graded stone aggregate as in leveling course of floor including demolition of existing PCC floor, complete all as specified and as directed.
Material and labour for Non skid ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile excieeding 0.06 sqm but not exceeding 0.18 sqm, as in floors etc. set, jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)
Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)
Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)
Material and labour for Glazed ceramic tiles as in vertical surfaces 300X600X7mm /300X450X7mm thick or equivalent set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar (1:3),pattern as approved complete all as specified and as directed. Make-Somany/Johnson/Kajaria
Material and labour for 15-20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking plat forms and like in 10 mm thick cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and as directed.
Material and labour for 3mm thick wall care putty on wall/ceiling complete all as specified and directed
Material and labour for complete removal of existing treatment on wall / ceiling / chajja,with water pressure gun and wire brush and filling cracks, holes,etc all as specified and as directed.
Material and labour for preparation of old plasterd or unplastered surfaces of walls and applying one coat of oil bound destemper complete all as specified and directed
Material and labour for preparation of old plasterd or unplastered surfaces of ceiling and applying one coat of oil bound destemper complete all as specified and directed
Material and labour for preparation of old/new plastered or unplastered surfaces of walls and applying two coats of oil bound destemper, including priming plastered and other surfaces with alkali resistant primer complete all as specified and directed.
Material and labour for preparation of old/new plastered or unplastered surfaces of ceiling and applying two coats of oil bound destemper, including priming plastered and other surfaces with alkali resistant primer complete all as specified and directed.
Material and labour for preparation of old/new plastered or unplastered surfaces of wall/roof and applying one coat of cement base paint complete all as specified and as directed.
Material and labour for preparation of old/new plastered or unplastered surfaces of wall/roof and applying two coats of cement base paint including priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. NOTE:- (i) Filling of cracks, holes and dents are deemed to be included in the quorted rates. (ii) Proper curing with water to be done before and after application of 1st coat.
Material and labour for water proofing treatment of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after cleaning the surfaces thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturers complete all as specified and as directed. Make : Dr Fixit or equivalent
Material and labour for cleaning treatment of external walls of stone masonary by applying 1 coat Sagatech SC @ 2.5 litre per Sqm (Stone and stone masonry cleaner) Make Saga polymer only ( approved by trial) or equivalent after cleaning the surface throughly and sealing all the pointing with cement and sand mortar with water proofing additive as per the manufacturers specification and direction of Engr-in-charge.
Material and labour for one coat of synthetic enamal paint over wooden surfaces including preparation of old surfaces over 10 cm width or girth complete all as directed.
All as per Sl Item No. 29 above but two coats of synthetic enamel paint on wooden surfaces.
Material and labour for one coat of synthetic enamal paint on steel surfaces including prepration of old surfaces of any description, over 10cm in width or girth complete all as specified and directed.
All as per Sl Item No. 31 above but two coats of synthetic enamel paint on wooden surfaces.
Supply and fix in repairs kitchen sink with drainage board made out of stainless steel 1mm thick with all fittings (i.e sink coupling and waste pipe) including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe overall size 915x 460 mm, bowl size 410x330x160mm complete all as specified and as directed.
Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane at any height complete all as specified and directed.
Supply and fix in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.
Supply and fix in repairs 18-19mm thick prelaminated particle board prelaminated one side, grade 2 quality, interior grade commercial type including 6 mm thick teak wood lipping, as in cupboards, kitchen cabinet and in similar works complete all as specified and as directed.
Supply and fix in repairs continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) in 40mm complete all as specified and directed.
Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
Supply and fix in repairs 75mm long hasp and staple, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Supply and fix in repairs 300mm long, ordinary mild steel rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and directed.
Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm complete all as specified and as directed.
Supply and fix in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and as directed.
Supply and fix galvanised iron tubing 15mm bore medium grade, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed.
Supply and fix galvanised iron tubing 20mm bore medium grade, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed.
Supply and fix in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Cleaning of Serviceable PVC water tanks exc 250ltrs and n.exc 500ltrs, removing all scales and dirt etc from tank and from mouth of circulating pipes etc complete all as specified and as directed.
Cleaning of Serviceable PVC water tanks exc 500ltrs and n.exc 1000ltrs, removing all scales and dirt etc from tank and from mouth of circulating pipes etc complete all as specified and as directed.
Supply and fix in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore dia of pipe complete all as specified and as directed.
Supply and fix in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 25mm bore dia of pipe complete all as specified and as directed.
Supply and fix in repairs cast iron floor trap/nahani trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 100 mm, complete all as specified and directed.
Material and labour for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and directed.
Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No CURTIS or techno commercially equivalent makes specified in PS fixed as in repairs, complete all as specified and as directed.
Supply and fix in repairs floor mounted coupled WC with PP soft close seat cover, hinged, fixing accessories set including cistern with cistern fittings all as per CERA Cat No: ARS-WHT-39751P, ARS-WHT-39751S or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Material and labour for Viterious china wash basin white flat back size 540 x 395 x185mm mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings all as per ESSCO Cat No CMS-WHT-10381 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix in repairs Pillar taps, 15mm dia, long body/swan neck, fancy type suitable for fixing to wash basin screwed for iron pipe and fixed with necessary fittings and including PVC connection all as per CERA Cat Part No F2004301or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repairs Bib taps, 15mm bore long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down,screwed for iron pipe or for brass ferrule all as per Prayag Cat No 8308 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix in repairs wall mixer 3 in 1 Brass CP for mixing hot & cold water screwed down for iron pipe and fixedall as per Prayag Cat Part No 9380-N or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repairs Shower rose 15mm dia brass chromium plated, 125mm size with swivel joint incl fixing to steel pipe all as per Prayag Cat No BS-30 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix in repairs Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, 15mm bore size screwed both ends for iron pipe or for unions and fittings all as per Prayag Cat No 7326 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Material and labour for PVC connection 450mm long with 2 nos brass check CP nuts as suitable complete fixed in repairs all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 75 mm thick plain cement concrete (1:3:6), type C2 using 40mm graded stone aggregate as in plinth protection and paths laid in alternate bays & surfaces finished even and smooth without using extra cement, complete all as specified and directed.
MAHESH DADAJI BACHHAV
JP ENTERPRISES
V.R.PRAJAPATI AND CO.
Shri Sant Cosntruction
L.K.R.TIWARI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .