SPECIAL REPAIR TO BLDG NO P 27 TRANSIT OFFICERS ACCN UNDER GE NORTH DELHI CANTT 10

Amount

Taking down cement plaster on brick or stone walls/ceiling including racking out joints, hacking for key scrubbing down with water etc. Complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone / masonry, brick work, rendering finished even and smooth (without using extra cement) complete all as specified and directed.

M&L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with liquid water proofing compound @ 3% by weight of cement or as specified by the manufacturer all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L 15 mm thick sand faced plaster on brick work or concrete surface in cement mortar 1:2 on external mixed with liqued water proofing compound @ 3% by weight of cement or as specified by the manufacturer all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L Rendering 5mm thick CM (1:3) on fair faces of brick work or concrete surfaces as in ceiling/chajja/RCC surfaces complete all as specified and directed.

Supply only integral water proofing compound all as specified and as directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for 1/2 brick thick brick work with sub class B brick using old size brick, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed

M&L preparation of newly plastered surface of wall and applying two coats of plastic emulsion paint using auto-roller and airless paint sprayer over a coat of primer over two coats of wall care putty. all as specified and directed.

M&L two coats of Distemper oil emulsion, white or tinted on new ceiling surface including preparation of surface.

M&L for preparation of new external wall surface applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004,alkali and fungal resistence,dirt resistence exterior paint of required shade (company depot tinted) with silicon aditives at 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 Ltr/10 sqm complete all as specified and all as directed by Engineer in charge .

Complete removal of existing treatment & leveling of wall/ceiling surface using mechanical / electrical operated sanding / scraping machine within-built vacuum suction system to suck the existing treatment as retrieved by scrapping/sanding etc . complete all as specified and directed by Engr-in-Charge.

M & L for providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed

M&L for two coats of plastic emulsion paint over prepared surface of wall using auto-roller and airless paint sprayer complete all as specified and directed by Engr-in-Charge.

M&L preparing of old plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43l/10sqm using auto-roller and airless paint sprayer all as specified and directed.

M&L including dismantling , double charged GVT Vitrified glazed tiles (Designer type) 8-10 mm thick square/rectangular light shade texture polished, area of each tiles exceeding 0.42 sqm but n exc 1.0 Sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed. Make :Somany ,Kajarya ,Orientbell

M&L including dismantling , Double charged GVT Vitrified glazed tiles (Designer type) 8-10 mm thick square/rectangular light shade texture polished area of each tiles exceeding 0.42 sqm but n exc 1.0 Sqm, as in dado/skirting over 10mm thick plaster in CM 1:4 all as specified.

M&L incl dismantling, for Non - skid coloured ceramic tiles (300x300mm) x7-8 mm thick in floors etc. (Square or rectangular) area of each tile exc 0.06 but n exc 0.11 sqm set and jointed in neat cement slurry and pointed in coloured cement to match colors of tiles & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L incl dismantling, for digital glazed coloured ceramic tiles of size 450x300/600x300 7mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and removing from site all as directed.

Ditto as per item no- above but exc 1.5 sqm but n.exc 4sqm each

Cutting holes exc. half brick but not exc one brick in brick walls built in CM or in cement lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required

S&F in repair 12 mm thick toughened glass door shutters of size area exc 1.50 Sqm but n exc 6 Sqm, including necessary floor spring hydraulically regulated, otherside fixed on pivote. CP fiitings and fixtures, CP handles CP Locking arrangement, necessary cutting & holes moulding and fixed in complete as specified and directed by Engr in Charge.

Grinding & polishing of existing flooring (Kota stone, white marble, green marble etc) by electric operated machine complete incl filling of joints with white cement mixed with pigment to match the floor including required polishing etc. complete all as specified and directed.

Supply and fixing factory made uPVC coulered Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash xtruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Incl Stainless Steel Butt Hinges and necessary stainless steel screws.

Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,window-cills, cooking platform and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 15 mm thick bedding layer in cement mortar 1:6 as in cooking platform complete all as specified and directed.

S&F 140mm long Floor door stopper of brass body & tongue with hard drawn steel spring.complete all as specified and directed.

S & Fix in repair powder coated Anodised Aluminium window and ventilator shutter with frame of aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, glass lours, screws, suitable anodised aluminium fitting such as handle 150mm, tower bolts,stoppers etc ( glass shall be measured seperatly) all as dirictered by Engr in Charge

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.complete all as specified and directed.

M&L in repair brass coated aluminium decorative curtain rod 20mm dia of make VISTA or eqv. including brackets, side knobs and fixed to wall complete all as specified and directed.

S&F in repair Zebra venetian blinds of any colour or size as approved by Engr-in-Charge fixed to wall including all accessories complete all as specified and direcred.

S&F in repair Aluminium (Diecast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.complete all as specified and directed.

S&F in repairs wall hung wc colour white with PP soft close seat cover,hinges,accessories set of vitreous china size 365x635x770mm including cistern with cistern fittings for cat pot no. set and connection to trap and flushing pipe etc complete all as specified and directed.Make Jaquar Cat OPS-WHT-15953BIUFPM or Hindware Cat No 92054 (P-22) or Cera Cat Pat No

S&F in repairs vitreous china, wash hand basin with pedestal , size 585x450x200mm including MS brackets including cutting and priming in with 32mm CP waste coupling and bottle trap complete all as specified and as directed. (Make Jaquar FLS-WHT-5801 & 5301 or Make Hindware Cat No 10100 & 11003)

S&F in repairs Single Lever Wall Mixer With Provision For Overhead Shower With 115mm Long Bend Pipe On upper Side, Connecting Legs & Wall Flanges.(Make Jaquar KUP-35117PM & Make hindware Cat No F520019) complete all as specified and directed.

S&Fix in repair Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses & Base Flange (Make Jaquar FLP-5051BPM or Make Hindware Cat No F360019RGD) complete all as specified and directed.

S&F 100mm cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified.

Dismantling and breaking up old cast iron drain pipes of 75/100/110mm dia jointed in cement mortar and taking out of trenches and removing materials from site of work complete all as specified.

S&F 75mm bore cast iron soil, waste and vent spun pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified.

S&F 100mm bore cast iron soil, waste and vent spun pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified.

S&F 110mm bore PVC(SWR) pipe single socketed, in any length fixed to wall with rubber ring joint, ISI marked complete all as specified.

S&F 75mm bore (any radious) cast iron bends diminishing pieces or tapers complete all as specified.

S&F 75mm bore (any radious) cast iron bends diminishing pieces or tapers with oval access door complete all as specified.

S&F100mm bore (any radious) cast iron bends diminishing pieces or tapers complete all as specified.

S&F100mm bore (any radious) cast iron bends diminishing pieces or tapers with oval access door complete all as specified.

S&F 110mm bore (any radious) PVC (SWR) bend, ISI marked complete all as specified.

S&F 75mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F stack clamps for 75mm bore pipeout of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for all as specified.

M&L RCC type B-1, 1:2:4 (20mm graded stone aggregate) as in chajjas/ shelves etc complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs,curved and similar items including edges complete all as specified and directed.

M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip). complete all as specified and directed.

All as per Sl item No- above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete and 20mm tjick scread bed in C;M 1: 6 complete all as spfd and directed.

M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

M&L roughening concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc incl taking down tarfelt and brushing neat cement slurry @3Kg/Sqm incl 20mm thick screeding in Cement mortar (1:4) finished even and smooth and M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- Application of water proofing treatment will be done by Authorised Applicator only. (i) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

S&F in repair 12 mm thick toughned glass as in partition including neccessary. CP fiitings and fixtures, CP frame work, neccessary cuting & holes moulding and fixed in complete as specified and directed by Engr in Charge.

S&F in repair 12 mm thick toughned glass as in railing including neccessary CP fitings and fixtures.neccessary cuting & holes moulding and fixed in complete as specified and directed by Engr in Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement incl window grill (Grade- 304) using 10mm thick square bars 100mm centre to centre of weight not less than 0.50 kg/Rm incl necessary frame in rectangular hollow section and accessories for window and ventilator grill/ guard bar complete all as specified and directed.

M & L for 12mm thick POP false ceiling incl wire mesh and aluminium framed grid alongwith nuts and bolts as in ceiling fixed with screws as per manufactures instructions incl reinforced with expanded wire mesh and applying two coats of plastic emulsion paint over a coat of primer on exposed surfaces complete all as specified and directed by Engr - in - Charge. Note : Design of ceiling incl Cove etc shall be as approved by GE.

M &L for standard colourless solid glass bricks / blocks of 80% light transmision tinted or frosted glass block of size 190x190x80mm fixed in almn frame 38mm standard size (powder coated) incl all accessories required to proper fixed in existing wall / frame. Fire exposure of glass brick shall be according to ASTM E 163 & apply sealent evenly is fulll depth to fixed the glass brick to frame and wall as per specification.

S&F RAJSHRI brand factory Made WPC railing combining WPC board/fancy designer type grating and WPC frame 100% Solid WPC ( Wood polymer Composite ) railing of required length and of 2' to 2.5' ht, comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from single Extrusion process, WPC foam sheet Single Extruded (Inner ) with having minimum density not less than 650 kg/cbm and WPC frame having min density 780kg/cbm manufactured by RAJSHRI an ISO 9001-2015 certificate company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/ mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Resistance. For WPC railing 18mm thick WPC Jali to be fixed with WPC frame of size 75 x 50mm size with necessary support vertical frame length incl demolition of existing RCC jaali with necessary full body threaded star headed counter sunk SS Screws complete all as specified and as directed of Engineer -In-Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type skelton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Incl Stainless Steel Butt Hinges and necessary stainless steel screws.

Material and labour for existing point wiring and conduit and replacement of all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white/magnesium grey cover plate with frame, blanking plate etc suitable for Mylinc / Coral / Sleek model accessories etc and making good to the disturbed surfaces to match the existing complete all and Taking down all Switch, Socket and all complete including fixture and fittings as specified and directed by Engr-in-Charge for one light point controlled by one, one way switch 06 Amps.

All as per srl item No 72 here-in-before but one bell point controlled by one bell push switch 06 Amps.

All as per srl item No 72 here-in-before but one light point controlled by 2-way switches.

All as per srl item No 72 here-in-before but one ceiling / Exhaust fan point controlled by one, one way switch 06 Amps.

All as per above item No 72 here-in-before but one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per above item No 72 here-in-before but with point wiring 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin, 16 Amps socket outlet point on independent board controlled by one, one way 16 Amps switch

All as per above item No 77 above here-in-before one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board and independent MCB complete

S&F in repair modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified and directed by Engr-in-Charge. Make-Legrand Cat Part No 573400/ Schnider Cat No X1001WH/Anchor Roma Cat No 21011 or equivalent of Command approved make

S&F in repair modular bell push with indicator, 06 Amps, single pole, one way, 230 volts complete all as specified and directed by Engr-in-Charge. Make-Legrand Cat Part No 573413/ Schnider Cat No X1005WH/Anchor Roma Cat No 21044 or equivalent of Command approved make

S&F in repair modular switch 2 way 6 Amp, 230 Volt, single pole two way complete all as specified and directed by Engr-in-Charge. Make-Legrand Cat Part No 573413/ Schnider Cat No X1002WH/Anchor Roma Cat No 21022 or equivalent of Command approved make

S&F in repair modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete all as specified and directed by Engr-in-Charge. Make-Legrand Cat Part No 573410/ Schnider Cat No X1001WH/Anchor Roma Cat No 21066 or equivalent of Command approved make

S&F in repair modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified and directed by Engr-in-Charge. Make-Legrand Cat Part No 573424/ Schnider Cat No X2005WH/Anchor Roma Cat No 21102 or equivalent of Command approved make

S&F in repair modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete all as specified and directed by Engr-in-Charge. Make-Legrand Cat Part No 573471/ Schnider Cat No X2106WH/Anchor Roma Cat No 21124 or equivalent of Command approved make

S&F in repair modular ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals complete all as specified and directed by Engr-in-Charge

S&F modular ceiling fan regulator, 02 module, AC, 230 volts, 120 watts, duly ISI marked complete all as specified and directed by Engr-in-Charge. Make-Legrand Cat Part No 573416/ Schnider Cat No X3100WH/Anchor Roma Cat No 22546 or equivalent of Command approved make

S&F in repair modular TV Co Axial Socket 01 module complete all as specified and directed by Engr-in-Charge

S&F in repair modular RJ-11 Telephone Jack, single with shutter 1M complete all as specified and directed by Engr-in-Charge

S&F in repair Decorative aesthic design mirror luminaire copper antique / brass finish 15Watt lum with all accessories prewired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. Make: Eveready / Philips / Havells

S&F in repair decorative wall mounting light MS/Glass E-27 Base/ Brass, lamp holder, including 9 watts LED bulb for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as specified and directed by Engr-in-Charge. Make: Eveready / Philips / Havells

Supply and fixing in repair 15 Watt round LED panel recess/ mounting downlight in 6500K/CDL with integrated driver to delivered superior light output and uniformity , ceiling cutout 148mm dia height max 35 mm recess luminaires all as specified and directed by Engr-in-Charge. Make Eveready / Philips / Havells

S&F of Pendant modern interior Chandelier Brass White E27 lamp MS /Glass brass finish /with eletrical accessories wired to the electrical connection arrangement equivalent complete all as approval, specified and directed by Engr-in-Charge. Make: Eveready / Philips / Havells

S&F surface mounted LED building security light fitting in high pressure die cast aluminium housing not less than 35 watt fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V including light grade GI tube mounting size 40MM bracket of suitable size & length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete and one coat of primer and one coat of synthetic enamel paint after coating of primer on GI bracket and pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core complete all as specified and directed by Engr-in-Charge.

S&F LED strip light/profile lighting 24 W per meter, 6500K, length- 5 Mtr complete all as specified and directed by Engr-in-Charge.

S&F (in replacement) industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed by point Engr-in-Charge.

M/s Verma and Co (BID ID -3292936)

M/S Rohit Enterprises (BID ID -3293942)

blues developers pvt ltd (BID ID -3293914)

M/S SIMRAN CONSTRUCTION CO (BID ID -3294014)

MINHAS CONSTRUCTIONS (BID ID -3293346)

The new hut furnitures (BID ID -3293836)

M/S Parshant Associates (BID ID -3294000)