REPAIR/ REPLACEMENT TO JOINERY, FLOORING, SANITATION AREA, ROLLING SHUTTERS, ATT, WPT AND OTHER CONNECTED ITEMS AND MES INSTALLATION AT NCHC POWAI (ZONE B) ULHASNAGAR UNDER GE(NW) BHANDUP

Amount

Taking down aluminum window shutter carefully and refixing the same in position replacing rubber bead, worn-out handles and replacing existing broken Aluminum section / glass/wire cloth/backlite sheet, if any, and making window shutter serviceable, complete all as specified and directed. Note - Aluminum section / Glass / wire cloth / Bakelite sheet, handle etc shall be measured and paid separately as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

Taking down chowkat or frame with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames), exc 1.50 sqm but not exc 4.0 sqm each complete as directed

Taking down shutters of any description, exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed

Taking down and refixing in the same opening shutters of any description exceeding 1 Sq.m but not exceeding 2 Sq.m each complete all as specified and directed.

M&L for IInd class Hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and directed.

S & F,IInd class hardwood 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 2nd class hardwood, glazed and skelton shutter, 35mm thick, open rebated and prepared to receive glass, gauze etc, divided into square with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plane, chamfered or rounded, fitted with cut and mitered bead for securing glass, gauze etc, size of member of shutters as specified in SSR Part -I, section 8, class 8.24(a) (Door shutter), supplied and fitted to chowkats all as specified and directed.

S & F in repairs, IInd class Hard wood plain fillets squares, rectangular or triangular in section, wrought, secured with screws, sectional area exc 13 Sqcm and not exc 25 Sqcm complete all as specified and directed.

M&L for 19 mm thick block boards, grade - I quality, exterior grade, decorative type with decorative face veneer on both sides with external teak wood lipping, 6 mm thick alround fixed with screws to timber frame work for cuboard self or shutters etc, complete all as specified and directed..

S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed.

S&F factory Made solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet with Free EPS shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing for SI No.8080 on ser page No.156 in SSR-2020 (Pt-II), complete all as specified and directed.

M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen plateform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed

M&L for 18-20mm thick granite(of any type) work table rubbed and polished as in jambs, pillars, door and windows-cill, cooking platform , jambs, wash basin platform and the like in cement mortar (1:4) including pointing in white / coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of oval shape for fixing of counter wash hand basin etc over and including 10mm thick rendering / screed in CM 1:4 on fair faces of brick/concrete surfaces complete all as specified and directed.

S&F machine cut and machine polished, green marble, 18-20mm thick on horizontal or vertical surface,as in window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including rendering coat of 10 mm thick in CM 1:4 all as specified and directed.

S&F standard aluminum section powder coated in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of approved makes). Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

S&F aluminum anodised grill DG- 202 ( 10 mm x 5.2mm ) of approved makes fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and directed

Supply only 4.80mm thick glass ordinary quality plain not exc 0.5 Sqm each pane with including wooden/rubber beading or gasket for aluminium section complete all as specified.

Supply only 4.80 mm thick glass ordinary quality in plain exc 0.50 Sqm each pane including rubber beading or gasket for aluminium section complete all as specified.

Supply only for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations for aluminium frame work with including rubber beading or gasket for aluminium section complete all as specified.

Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

S&F bands, straps supports or stay heavy for large gates, hook and pintle hinges clamps, hold fasts, wall tiles, hooks for hanging fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for providing cement concrete type C1, 1:3:6, using 20mm graded stone aggregate as in bed block for hold fast, coping etc including necessary form work complete all as specified and directed.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden / steel frame or stone, concrete or brick surrounding, glazed with putty or fixed with beads complete all as specified and directed.

S&F for 4.0mm thick sheet glass ordinary quality and glazing with oil putty in steel windows and teak wood beading in wooden shutters square not exc 0.5 Sqm in each pane complete all as specified and directed.

All as per item No-26 above but 4.0mm thick figured glass pin headed type complete all as specified and directed.

S &F, in repairs, aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with in wooden windows, doors etc,and fixing of teak wooden beeding complete all as specified and as directed.

Supply and fix aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 250 mm fixed at any position all as specified and directed.

S&F in stainless steel butt hinges, 100mm, medium weight complete all as specified and directed

S&F in extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed.

S&F in aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F in repair for 20mm dia fancy type chromium plated curtain rods with fixing fancy brackets, brass screws etc complete all as specified and directed

S&F in repair for 20mm dia aluminium coated curtain rods complete all as specified and directed

S&F in repair brass chromium plated towel rail 20mm dia 'D' type 600mm long between flanges of with and including chromium plated brass screws etc complete all as specified and directed.

S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed..

S&F in repairs vitreous china squatting pan, white, orissa pattern pan of size 580 mm x 440 mm of standard quality with integral foot rests,and including 'P' trap or 'S' Trap complete including connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specifiedand directed.

S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed.

Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed.

S&F in repair for CP concealed stop cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type complete all as specified and directed.

S&F in repair CP pillar taps 15mm bore., cast copper alloy, chromium plated fancy type complete all as specified and directed.

S&F in repair 15 mm bore Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

M&Lin repair waste fitting of 32 mm bore brass, chromium plated for glazed ware wash basin etc complete all as specified and directed..

M&Lin repair waste fitting of 40 mm bore brass , chromium plated for glazed ware for sink coulpling etc complete all as specified and directed..

S&Fin repair waste pipe for WHB/ sink 32mm bore fixed to wash hand basin/sinks coupling length pipe 0.90 mtrs each Make -prayag complete all as specified and directed..

S&Fin repair 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed.

S&F in repair stainless steel grating in ground shape 100mm dia complete all as specified and directed.

All as per item No 51 above but with hole complete all as specified and directed.

S&Fin repair plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed..

S&F stainless steel kitchen plate rack size 900x600mm etc complete all as specified and directed.

S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers including CI cantilever bracket, connecting union etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm including supply and fixing bib tap CP with long body screwed for iron pipe complete all as specified and directed.

S&F in repair low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc.

S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed.

S&F in repair soap dish Cat No BA -25 complete all as specified and directed.

S&F in repair Toilet paper holder cat No BA-58 complete all as specified and directed.

S&F in repair Health faucet with 1 mtr tube & hook complete all as specified and directed.

S&F in repair CP corner glass with brass bracket screws etc complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

S&F 15mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

All as per item No 64 above but 20 mm bore complete all as specified and directed.

Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles.complete all as specifed and directed

M&L for brick work with sub class B old size bricks and of class designation 35 (Minimum compressive strength 35 Kg/Sqcm) , straight or curved on plan exc. 6metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone wall surface including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land etc complete all as specified and directed.

M & L for rendering 10 mm thick in CM 1:6 on brick walls or concrete surfaces in patches and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 as in ceiling in patches finishing even and fair etc complete all as specified and directed by EIC.

M/L for 15mm thick rendering in CM 1:4 on surface of wall in patches mixed with water proofing compound and shall be scored to provide key for rough finishing coat. including necessary scaffoldings etc complete all as specified and directed Note:- WPC shall be measured and paid seperately.

M&L chipping, removing carefully concrete surface by low impact hamer/bracker without damaging the structure incl preparation of old surfaces of reinforcement bars as per manufacturer's instruction and disposal of debris out side MOD land and applying anticorrosive protective coating for steel reinforcement surfaces and allpying epoxy bond coat of approved make over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new mortar, by brush application and building up the profile of structural members by using polymer modified mortar of approved, upto 20mm thickness including levelling, profiling etc complete all as specified and directed.

Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:3) using water proofing compound @ 3% by weight of cement complete all as specified and directed BY Engr-in-charge ( Note : water proofing compound will be measured and paid seperately)

"Supply and Application of 7 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over-coating with sandwich coat of NEEWP + Cement mixture as waterproofing layer with 80 GSM non-woven fibre mesh, application of 3rd coat of NEEWP + Cement mixture elastomeric waterproofing layer having +450% Elongation. The surface is then to be tested for water tightness with ponding/ flooring test for min. 3 days and then top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only"

Supply only integral water proofing compound.

M&L for dismantling asbestos cement (corrugated micorrugatedetc.) sheet in roof covering/ fibre sheets etc complete all as specified and directed.

S&F pre-coloured corrugated galvalume (55% aluminium + 43.5% Zinc+ 1.5% Silicon) steel sheets as in roofing/wall cladding, 0.50mm thick (Total coated thickness), 0.45 mm ( base metal thickness )conforming to AS-1397/ASTM A-792 and having yield strength minimum 550 MPA fixed with hot dip galvanised, self drilling and self tapping screws neoprene and EPDM washers and fixed as per manufacturers instructions complete all as specified and directed.

S&F pre-coloured plain galvalume (55% aluminium + 43.5% Zinc+ 1.5% Silicon) steel sheets, 0.50mm thick (Total coated thickness), 0.45 mm ( base metal thickness ) conforming to AS-1397/ASTM A-792 and having yield strength minimum 550 MPA fixed with hot dip galvanised, self drilling and self tapping screws neoprene and EPDM washers and fixed as per manufacturers instructions complete all as specified and directed.

Dismantling of MS works of any description such as ,ladders,gates work,grating etc, including necessary straightening of bends complete all as specified and directed.

S&F Mild steel work of Framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including welding, complete all as specified and directed.

S & F MS steel work in tubular/roof trusses (framed), purlines, rafters, brackets, wind tiles including distance pieces clates,crane gantries, rails and fastenings and heavy bracket framing, etc (beam,tee,angle,channel or flat sections and circular sections in columns) etc., complete including nessary cutting, welding,fabrication and eraction Machine hydraulic bending , confirming toFe 410 - W (Gde E-250) quality-A. complete, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over coat of alkali resistant primer with roller etc complete all as specified and directed.

M&L for for preparation of new plastered surfaces on walls, chajjas and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of primer in approved shade and as per manufactur's instructions complete all as specified and as directed.

S & F in repairs Anodised alluminium snap grid frame work size 605x605mm for false ceiling all as specified.

M & L in repairs for 12 mm thick perforated particle board / tiles for insulation and acoustic purposes, 60 x 60 cm in size, fixed with screws to timber frame work or with staples on snap grid in ceilings, flat or sloping complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.

Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L providing cement concrete type B0, 1:2:4 (12.5mm graded aggregate) 30mm thick as in flooring all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M/L for Non-skid ceramic tiles (Coloured) Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed.

M/L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed.

M/L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in vertical surfaces such as skirtings, dados etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed.

S & F in repairs Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type thk of laths 1.25mm all as specified and directed.

M&L for preparation for two coats of synthetic enamel paint over on new steel /iron surfaces over one coat of red oxide primer complete all as specified.

S&F in repair stainless steel heavy duty continuous piano hinges for cupboar/cabinet etc complete all as specified and directed.

M&L for post construction anti- termite traetment along the wall below concreate or masonary apron using chemical emulsion @2.25 liters per linear meter including drilling and plugging holes with cement morter 1:2 to match the existng floor etc complete all as specified and directed.

M & L for post construction anti - termit treatment at points of contract of wood work using chemical emulision (in oil or kerosin based solution ) @ 0.5 liters per holy by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm centere to center and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed.

M&L for injecting chemical GLYPHOSPHATE 41% SL 20 ml or till refusal by making cuty/injection of the stem of plant 30 mm C/C and spraying with solution (25 ml GLYPHOSPHATE 41% diluted with 1 ltr of water) and removing the plant/vegitation including penetrated roots complete including necesary scaffolding etc all as specified and directed for plants/vegetation

Deduct Credit for Demolished/ Dismantled material Rs. (-) 63675.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

SB CONSTRUCTION

M/s Qureshi Construction Co

Anjali Constructions

R J ENTERPRISES

PANKAJ AND BROTHERS