Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bid Value. | |
| 2 | L2₹16.2 L+₹3.2 L (24.3%)Rejected-AOC NO 64 5TH C MAIN 7TH CROSS AGROGYAPPA LAYOUT KAMMANAHALLI NEAR RAJ KUMAR PARK BANGALORE 560084 | BENGALURU URBAN | KARNATAKA | 560084 | L2 | Rejected-AOC Higher Bid Value. | |
| 3 | L3₹17.0 L+₹4.0 L (30.8%)Rejected-AOC 6 1ST CROSS 1ST MAIN OLD POLICE STATION ROAD LAKKASANDRA BANGALORE 560 030 | BENGALURU URBAN | KARNATAKA | 560030 | L3 | Rejected-AOC Higher Bid Value. | |
| 4 | L4₹17.4 L+₹4.3 L (33.3%)Rejected-AOC 14 10 4TH MAIN 8TH C CROSS SRINIVASA NAGAR BSK 3RD STAGE BENGALURU 560085 | BENGALURU URBAN | KARNATAKA | 560085 | L4 | Rejected-AOC Higher Bid Value. |
Tender Value
₹20 L
EMD Value
₹20,000
Closing Date
28 Jul 2020, 6:00 pmClosed
GE (AF) BANGALORE
GE (AF) BANGALORE HQ TC AIR FORCE BANGALORE 560006
REPAIRS TO STROM WATER DRAIN, CULVERT COVER AND OTHER MISC WORKS AT CHAF BANGALORE
2020_MES_357781_1
8695/GE-37
Open Tender
Civil Works
Item Rate
180 days
CH (AF) BANGALORE
AS PER NIT
5 documents required · 5 mandatory
₹500
Yes
GE (AF) BANGALORE
₹20,000
Yes
18 Aug 2020
2 Jul 2020
30 Jul 2020
2 Jul 2020
28 Jul 2020
15 Jul 2020
3 Jul 2020 - 10 Jul 2020
Amount
Demolition brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for, complete all as specified and directed.
Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses, complete all as specified and directed.
Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) set in cement mortar (1:6), complete all as specified and directed.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4, finished even and smooth without using extra cement, complete all as specified and as directed.
Preparation of new undecorated surface of wall and applying two coats of cement base paint, complete all as specified and directed.
PCC (1:3:6) type-C1 using (40mm graded broken stone as in surface channel and drain including. necessary form work, complete all as specified and directed.
Extra fair forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement, including forms, moulds, mi-tred/stopped ends etc., complete all as specified and directed.
Providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, copings bed plates, blocks, including use of form work and finishing the cement concrete surfaces all as specified in clause 4.11.16.2(e) of MES Schedule Part-I, complete all as specified and directed.
Cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair, complete all as specified and directed.
100mm thick cement concrete 1:2:4 type B2 (40mm graded aggregate) as in floor finishines & pavings even and smooth without using extra cement, complete all as specified and directed.
Precast RCC 1:2:4 type B1 as in manhole cover including necessary form work set in cement mortar 1:4, complete all as specified and directed.
Mild steel TMT bars 10 mm dia and over, quality conforming to Grade Fe-500 or 550 cut to length , bent to shape required including cranking , bending spirally for hooping for columns,, hooking ends, binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Mild steel TMT bars 6 to 8 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
Mild steel round bars 25 mm dia and over, quality conforming to Grade Fe-500 or 550 cut to length , bent to shape required including cranking , bending spirally for hooping for columns,, hooking ends, binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
75mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base, complete all as specified and directed.
Chequered cement tiles of size 300mm x 300mm x 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
60mm thick coloured machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-35 Grade laid over 25mm thick sand cutioning layer and grouted with dry sand, complete all as specified and directed.
Preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer, complete all as specified and directed.
Preparation of untreated new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer, complete all as specified and directed.
Preparation of old treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality ), complete all as specified and directed.
Taking up or down steel tubing and connections,15mm bore including cleaning for serviceable pipe for re-fixing or removal of unserviceable pipe from site of work, complete all as specified and directed.
All as per item No. 26 here in before but 20mm bore, complete all as specified and directed.
All as per item No. 26 here in before but 25mm bore, complete all as specified and directed.
Re- fixing 15mm bore GI tubing, medium grade with provn of new fittings as required and fixing accessories in new or old position (walls,ceiling floor etc) including testing, complete all as specified and directed.
All as item No 29 herein before but 20mm bore, complete all as specified and directed.
All as item No 29 herein before but 25mm bore, complete all as specified and directed.
GI tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including testing, complete all as specified and directed.
All as item No 32 herein before but 20mm bore, complete all as specified and directed.
All as item No 32 herein before but 25mm bore, complete all as specified and directed.
Dismantling of PVC drain pipes of 75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work, complete all as specified and directed.
Mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.
100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4), fixed as in repairs, complete all as specified and directed.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc., fixed as in repairs, complete all as specified and directed.
PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement, fixed as in repairs, complete all as specified and directed.
PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed as in repairs to walls, complete all as specified and directed.
PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in floor, fixed as in repairs, complete all as specified and directed.
PVC (SWR) bend with access door 110 mm bore, fixed as in repairs, complete all as specified and directed.
PVC (SWR) bend 110 mm bore, fixed as in repairs, complete all as specified and directed.
PVC (SWR) double (Single Y) branch piece, with access door 110 mm bore, fixed as in repairs, complete all as specified and directed.
PVC (SWR) Branch piece single equal or unequal with access door 110mm bore, fixed as in repairs, complete all as specified and directed.
PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed as in repairs to walls, complete all as specified and directed.
PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor, fixed as in repairs, complete all as specified and directed.
PVC (SWR) 75mm bore bends any radius with access door, fixed as in repairs, complete all as specified and directed.
PVC (SWR) 75mm bore bends any radius, fixed as in repairs, complete all as specified and directed.
PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore, fixed as in repairs, complete all as specified and directed.
PVC (SWR) 75mm bore vent cowl, fixed as in repairs, complete all as specified and directed.
PVC (SWR) Branch piece single equal or unequal with access door 75mm bore, fixed as in repairs, complete all as specified and directed.
Removing of vegetation/plants growth/weeds etc including acid treatement for roots and necessary plastering in patches not ext 1sqm to the existing wall in terraces, wall surface of building etc complete at all floor levels, complete all as specified and directed.
Preparation of old decorated plastered or concrete surfaces or asbestos surfaces of any description and applying one coat of cement based paint all as specified, complete all as specified and directed.
K V RAJANNA
Sri Vijalakshmi Constructions
Kavitha Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .