Special Repair of Urban Primary Health Centre at Village Ratia in Fatehabad Distt. (Recalled)

Amount

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm thick without concrete base (HSR 8.26)

Scraping of white wash and colour wash (HSR 8.32 (a)

Scraping of cement plaster (HSR 8.32 (c)

Cement concrete 1:8:16 with brick ballast 40 mm nominal size in foundation and plinth (HSR 10.26)

Cement concrete 1:8:16 with stone aggregate 40 mm Nominal sie in foundation and plinth. (HSR 10.28)

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (Note:- Reputed make PVC Pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.89 (a) 100 mm dia PVC pipe 6 kg. pressure. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

(b) 150 mm dia PVC pipe 6 kg. pressure.

Providing and fixing PVC Bend ISI Mark. (Note:- Reputed make PVC Bend such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.90 (a) 100 mm dia PVC Bend. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

(b) 150 mm dia PVC pipe 6 kg. pressure.

Providing & Fixing false ceiling with grooves with 12 to 15 mm thick, 600 x 600 mm best quality mineral fibre tiles of approved make fixed on MS steel runners frame i/c cost of screws angles, cleats, rawel plugs, with taping and painting etc. complete in all respects as approved by the Engineer-In-Charge (HSR 13.93)

Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (Note:- Reputed make Tile Only ISI marked will be used as approved by Engineer-in-charge). (HSR 14.45+Note). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing and Fixing vitrified tiles of 600 x 600 mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (HSR 14.89) Note: - Tile shall be to premium quality (first quality) of reputed manufacturer like NITCO, KAJA-RIA, SOMANI, ORIENT, JOHNSONS & RAK

Providing and fixing 1st quality ceramic glazed wall tiles condirming to I.S 15622 (thickness to by specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. b) size of ceramic glazed tiles 300 x 450 mm NITCO, KAJA-RIA,SOMANI, ORIENT & JOHNSONS shall be used as approved by Engineer-In-Charge. (HSR 14.92 (b) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

12 mm thick cement plaster 1:4 (HSR 15.5)

Cement pointing 1:3 flush on brick & tile walls (HSR 15.63)

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.5)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.25).

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint (HSR 16.79 (b) Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge

Wire gauze fixed on chowkats with 25 mm thick deodar wood cover moulding of full width (HSR 17.21)

Supplying and fixing glass panes with deodar wood moulding (HSR 17.24 (c) 4 mm thick (glazing area above 55 sq dm, but upto 84 sq dm of each pane)

Cost of aluminum fittings complete for doors and windows such as tower bolts, handles, etc and screws for these fittings (excluding sliding bolt) (HSR 17.72 (b)

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy & chapllash etc. (non coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/ cleats, stops, nails etc. complete, fixed in position (excluding the cost of any fittings, other than speified above, but including labour for fixing the same in position (HSR 17.90 (a) - 17.18 (ii) note 35 mm thick

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling C.P brass/stainless steel screws, etc. complete shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required including aluminium fitting. (HSR 17.96+Note (i)].

Providing and fixing 12 mm thick preleminated paticle board flat pressed three layer or graded wood particle board conforming to IS;12823 grade I type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p brass / stainlees steel screws etc. complete (b) Pre-laminated particle board with decorative lamination on both sides. [HSR 17.97 (b)].

Providing & Fixing aluminium round shape handle of outer dia 100 mm with secrews etc. complete (HSR 17.102 (iii) Polyester powder coated minimum thickness 50 micron aluminium

Providing and Fixing parking shed of japani sheet as per approved color with 25 mm thick square MS tube frame of 450 x 450 mm spacing and outer support with 50 mm square tube and vertical post 75 mm dia MS pipe with cement concrete 1:2:4 foundation including cutting, welding, all size screws, nut bolt and placing in position as direction by Engineer-In-Charge (NS)

Public Health Work Cutting holes upto 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required (HSR 28.24 (b) 22.86 cm thickness of wall

Providing and fixing SFRC manhole covers and frames markd with IS: 12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage loading, unloading stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-in-charge. Type: Extra heavy duty set (MD-10) 560 mm clear opening. (HSR 29.94)

Providing and fixing in position best indian make (as approved by the engineer-in-charge) european type water closet suit, syphonic type, consisting (HSR 30.5 (b) Double trap syphonic WC suite (ii) single colour

Extra over item nos. 30.1 to 30.4 and 30.6 for providing and fixing 15 litres capacity c.i. low level vitreous chinaware cistern complete with flush bend all other necessary fittings instead of c.i high level cistern complete with fittings. (HSR 30.12 (i) White.

Extra over item Nos. 30.3 to 30.6 for providing and fixing best indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid (HSR 30.13 (i) White plastic seat (solid)

Providing and fixing position best indian make flat back or angular lipped front urinal 465 mm high consisting (HSR 30.19 (i) white

Providing and fixing in position best indian make (ordinary) lavatory suites consisting of :- Lavatory in vitreous chinaware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary. (HSR 30.41) white (v) R.S or C.I brackets for building into wall including painting 32 mm C.P brass waste with C.P brass chain and rubber plug 15 mm C.P brass screw down pillar tap with jamnuts or couplings best design (as approved by the Engineer-in-charge) All fittings best Indian make and; to the approval of the Engineer-in-charge All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc. Size 560 mm x 450 mm with one no. tap

Providing and Fixing in Position Best Indian Make Paper Holders Fixed into Wall With C. P Brass Screws Complete in all respects including cutting and making good the walls etc. (HSR 30.67 (b) Vitreous Chinaware (i) single colour

Providing and fixing in position best indian make towel rails fixed in with rawlslugs embedded in walls with C.P Brass screws, complete in all respect including cutting and making goods the walls etc. (As per item no 30.41) (HSR 30.68) (b) 20 mm dia C.P brass adjustable (i) 750 mm long

Providing and fixing in position glass shelf fixed in with rawl plugs with C.P brass screws complete including cutting and making good the walls etc. (As per item no 30.41) (HSR 30.69) (a) with C. P. Brass brackets and guard rail (i) 600 x 125 mm

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making goods the walls etc. (HSR 30.70 (a) C.P. Brass (i) Soap dish Large.

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer -in -charge) complete including cutting and making good the walls etc. (As per item no 30.41) (HSR 30.71) (a) Indian make (I) 600mmx450mm

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer-In-charge) (HSR 30.75) (a) Bib cock long body

Providing and fixing in position C. P. brass stop cocks (as approved by the Engineer-In-Charge) (HSR 30.76 (a) 15 mm stop cock (ii) Concealed stop cock with flange

Providing and fixing in position best indian make elexible tube connection (HSR 30.82) (b) C. P. Brass (i) 15 mm x 300 mm

Providing and fixing HDPE water storage tanks of sintex, Diplast, O.K. supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing Iin position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer. (HSR 30.119) 1000 Ltr. Cap.

Providing for laying, jointing, fixing and testing G.I. (Medium class "B" type of Tata & Jindal make) pipe lines and specials tees bends, sockets, elbows etc. inside building and testing etc. complete including cutting threading. Including cost of Special. G.I. specials shall be of Make:- UNIK, TATA, ZOLOTO. (NS) (i) 15 mm internal diameter of pipeline

(ii) 20 mm internal diameter of pipeline

(iii) 25 mm internal diameter of pipeline

Providing for fixing and jointing union couplings in G.I. and W.I. pipelines. [NS]. (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

Providing, fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside building including cartage from divisional stores or nearest railway station to site of works. (NS). (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

Providing & Fixing angle valve complete in all respect as per PWD specification (NS)

SHREE GANESH TRADERS