EXTERNAL PERIODICAL SERVICES AND CERTAIN CONNECTED ITEMS AT ANAND PARBAT AND TIMARPUR AND REPAIR TO BOUNDRY WALL COMPOUND WALL FENCING PATH DRAIN AND OTHER MISC BR WORK AT CFL DPDO AND 339 ASC TIMARPUR IN THE AOR OF AGE B/R II UNDER GE NORTH DELHI

Amount

M&L for preparation of old decoreated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and One coat of cement base paint complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decoreated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and two coat of cement base paint complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decoreated external wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and one coats of weather proofing exterior acrylic emulsion paint complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decoreated external wall surface applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004,alkali and fungal resistence,dirt resistence exterior paint of requqred shade (company depot tinted) with silicon aditives at 1.43 ltr/10 sqm complete all as specified and all as directed by Engineer in charge .

Taking down cement plaster in brick walls, including raking out joints, hacking for key, scrubbing down with water etc.

M & L for brick work with sub class 'B' bricks of old size, straight or curved on plan exc 6m mean radius, built in CM 1:6 including Demolition of brick work built in cement morter incl all quoins arches pillars etc.

M&L for ready mix plaster of 05mm thick on brick or conc surfaces in ceilling / chajja and reinforced cement concrete surfaces incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

M&L for preparation of new external wall surface applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004,alkali and fungal resistence,dirt resistence exterior paint of requqred shade (company depot tinted) with silicon aditives at 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 Ltr/10 sqm complete all as specified and all as directed by Engineer in charge .

M&L for ready mix plaster of 15mm thick on brick or conc surfaces in wall (External Surfaces) incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

M&L for preparation of new plastered wall surface two coat of cement base paint with one coat primer and wall care putty complete all as specified and all as directed by Engineer in charge .

M&L for preparing new plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

M & L for providing precast reinforced cement concrete jallies 45 mm thick including all mouldings type B-0 1:2:4 (12.5mm graded stone aggreagte) set in cement mortar 1:4 including taking down Old RCC Jallies complete all as specified.

M&L for writing letters or figures (Block, Roman, Italic or Indian) not exc 30 cm ( avge ht 20 cm) of height complete all as specified.

M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc.

Dismantling fencing wire mesh, any type complete all as specified.

M&L PCC in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for punched tape concertina coil (PTTC) 610mm dia coil provided on Y shaped MS section including necessary biding/welding complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome

M&L for applying two coats of synthetic enamel paint on Old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surface complete all as specified.

Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced)

M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. complete all as specified.

S& F for precast fibre reinforced cement concrete perforated drain cover of size 450x600 and 75 mm thick with MS flat at side of cover with necessary holding arrangement complete.

Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 300 mm

M&L Reinforced concrete pipes 300mm dia, class NP3, laid & jointed complete with collars all as specified.

Demolition of cement concrete in ground floor (unreinforced) and pavings including tiles etc ,n exc 15cm thickness (below or above ground level) complete all as specified.

M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified

M&L for Ultra design coloured tiles with PU coating of size 300x300x25 mm thick rubber moulded with white cement, as in floors incl over 15 mm thick screed bed in CM 1:6 jointed and pointed in neat cement slurry all as directed.

M & L machine precast colour concrete decorative interlocking paver block of a with grey cement and pigment any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified.

M & L sand filling under floors including watering and consolidation complete all as specified.

M&L for providing precast reinforced cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in jallies 45mm thick (measured solid) set in cement mortar 1:4, complete all as directed and specified.

Schedule of Credit - Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 16,950.00

R. S. Associates

M/S Blues Developers Pvt. ltd

S GOURAV PRAKASH ENTERPRISES

V.V CONSTRUCTIONS

The new hut furnitures

BEHAL TRADERS

MOHIT ENTERPRISES