SPL REPAIRS TO BLDG NO 12/11 AT TX STN TELIBAGH AND TILING AND ALLIED WORK IN BLDG NO 13S THIMMAYYA ROAD- PROVN OF RAIN WATER SHELTER AT BLDG NO 15A- MRA VIHAR AND LOOKING MIRROR OF ALL ROOMS AT SURYA SAINIK ARAMGRAH UNDER GE (WEST) LUCKNOW

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed.

Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floor and paving not exc 15cm thicknes below or above ground level complete all as specified and directed

Taking down steel tubing and connections and fittings 15mm bore including cleaning for refixing or removing from site complete all as specified and directed.

Taking down steel tubing and connections and fittings 20mm bore including cleaning for refixing or removing from site complete all as specified and directed.

Taking down steel tubing and connections and fittings 25mm bore including cleaning for refixing or removing from site complete all as specified and directed.

M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:4 not exc 10cm in girth complete all as specified and directed.

M & L for GI tubing 15mm dia, medium grade, galvanised with all fittings fixed to wall and floor complete all as specified and directed.

M & L for GI tubing 20mm dia, medium grade, galvanised with all fittings fixed to wall and floor complete all as specified and directed.

M & L for GI tubing 25mm dia, medium grade, galvanised with all fittings fixed to wall and floor complete all as specified and directed.

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compund shall be measured and paid seprately.)

Supply only Integral water proofing compound confirming to IS-2645-2003of approved Make complete all as specified and directed.

Material and Labour for rendering 10mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed.

M & L for rendering 10 mm thick in CM 1:3 on concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and directed.

Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement morter (1:6) complete all as specified and directed.

Material and Labour for coloured glazed ceramic tiles 300 x 450 x 6-7 mm thick on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM (1:4) including setting with cement paste and pointing with coloured/white cementeto match the tiles complete all as specified and directed.

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Supply and Fixing in repair 100mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

Material and labour Extra over 100 mm dia cast iron pipes and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed

Supply and Fixing in repair 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified and directed.

Supply and Fixing for cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and as directed.

Supply and Fixing for cast iron bends (any radius) diminishing pieces or tapers for 75mm dia complete all as specified and as directed.

Material and labour for salt glazed stoneware gully trap 150x150mm size fixed with PCC type B0, 1:2:4 using 12.5mm graded stone aggregate, all as specified and directed.

Material and Labour 75 mm dia cast iron floor trap, with grating including jointing to waste pipe, fixed in plain cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate complete all as specified and directed.

S & F 100mm bore cast iron branch piece, double (equal or unequal), ordinary or inverted (Spigot or socketed type) or with parrellel branches complete all as specified and as directed.

S & F 75mm dia cast iron cowl complete all as specified and directed.

S & F 100mm dia cast iron cowl complete all as specified and directed.

S & F 100mm bore CI Tee, single (equal or unequal), ordinary or inverted (Spigot or socketed type) or with parrellel branches complete all as specified and as directed.

S & F 75mm bore CI Tee, single (equal or unequal), ordinary or inverted (Spigot or socketed type) or with parrellel branches complete all as specified and as directed.

Supply and Fixing in repair WHB vitreous China white flat back size 550 x 400mm including brackets, brass CP waste coupling and PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand all as specified and directed.

Supply and Fixing in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float, flush pipe and handle including brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe complete all as specified and directed

S & F in repair Vitreous chinal urinal half stall type of size 355 x 345 x 535mm complete including provision and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal in back of cement including connecting to flushing pipe and outgoing pipe complete all as specified and directed.

S & F cast copper alloy bib taps chromium plated 15mm bore pipe with captain head complete all as specified and directed.

S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.

S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union complete all as specified and directed.

S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified and directed.

Supply and Fixing in repairs PVC connection pipe 15mm bore, 600mm long complete all as specified and directed.

S & F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed.

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed.

S & F Gun-metal, globe or gate valves 25mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 35mm thick Second class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkhats all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

Supply and fixing butt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and directed.

S & F 150mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.

S & F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.

S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

Material and Labour for 4mm thick plain sheet glass, ordinary quality incl glazing with putty, area n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F figured glass 4 mm thick, pin head type and glazing with oil putty in squares n exe 0.5 sqm in each pane.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material and Labour for complete removal of old treatment from walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls by washing rubbing and applying two coats of oil bound distemper over and including primer all as specified and directed.

M & L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over and including primer all as specified and directed.

M & L for for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for for complete removal of existing treatment from ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/coping and blocks for holdfasts etc.complete all as specified and directed.

M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151/Cemcrete acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151, two parts of cement by weight complete all as specified and directed.

M & L for 75 mm thick cement concrete type C-2 (1:3:6) using 20mm graded stone aggrtegate as in plinth protection including finsihing even & fair complete all as specified directed.

Surface Excavation not exceeding 30 cm deep and averaging 7.5 cm deep and getting out in soft/ loose soil complete all as specified and as directed.

Material and Labour for 75 mm thick PCC 1:4:8, type D-2 using 40mm stone aggregate as in subbase complete all as specified and directed.

M&L for sand filling under floors as in coushoning for interlocking tiles complete all as specified and directed.

M & L for factory made machine pressed precast 60mm thick PCC inter locking paver blocks M-35 grade as design & pattern approved by GE as in hard standing and filling of joints with fine sand complete all as specified and directed:

Repairing of RCC Chhajja projections, roof, facia etc bynecessary preparation scrapping cutting chiselling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete 1:1.5:3 using 12.5mm graded stone aggregate including necessary form work andreinforcement with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats offinishes as provided to the existing surfaces to match with the existing surfaces all as specified and directed.

Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. M & L for providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 25mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface.

M&L for Rendering 10mm thick in cm 1 : 3 mixed with water proofing compound as per manufacturers instructions on concrete/brick surfaces when PCC is still green including finishe even and smooth etc complete all as directed (WPC measured & paid separately).

M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of aluminium paint on membrane surface all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

M&L Cement concrete type D-2, 1:3:6( 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.incl brushing neat cement slurry with 3.0kg of cement per sq. metre

M & L for coloured vitrified ceramic tiles, light shade of size 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No-4 above but as in vertical surfaces as in dado/skirting with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over required sand cushining complete all as specified.

M&L Providing, cement concrete type B-1,using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed bedding layer in CM 1:6 including grinding,cutting, rubbing and mirror polishing complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick as in riser of steps, skirting, dado and pillar and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 15 mm thick screed bed bedding layer in CM 1:4 including grinding,cutting, rubbing and mirror polishing complete all as specified and directed.

M&L Marble tiles 30cmx20cm x20mm thick machine cut, bedded jointed and pointed with grey cement slurry and laid over 20 mm thick screed bedding layer in CM 1:6 including cutting,grinding and polishing complete all as specified and directed.

Excavating in post holes (or similar holes) of soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specifed and directed.

Cement concret Type B2 1:2:4 (40 mm graded aggregate) in walls or in walls or x any thickness, size or shape including columns, pillar and posts (including caps and bases) complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 all complete all as specified and directed.

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down carefullycopper/aluminium point wiring (light, fan, bell, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC existing concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light/fan point controlled by one switch

All as item No 99 but one socket outlet point 5 Amp on an independent board complete all as specified and directed.

All as item No 99 but on the same board complete all as specified and directed.

All as item no 99 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board complete all as specified and directed.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

Ditto as item 103 but using 15 Amps complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed.

S&F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and directed.

Supply & fix fan regulator electronic step type for ceiling fan fixed, in existing board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and directed.

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 8 way double door type , 240 volts complete all as specified and directed.

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 4 way double door type , 240 volts complete all as specified and directed.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

S&F in repairs of recess type round LED 7/9W downlighter 6500/4000K all as per specified and directed

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, triple pole & neutral 100 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source complete all as specified and directed.

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed.

Supply and fix wall mounting fans 400 mm (white) string controlled oscillating type including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed .

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, “ IP66 and IK 07 average life 50000 burning hours with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed.

Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size ,grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed.

M/s Bhadoria Associates (BID ID -3192060)

M/s Sudhir Enterprises (BID ID -3185155)

EVEREST CONSTRUCTION (BID ID -3186662)

GANGA TRADERS (BID ID -3186633)

m/s raghubar dayal (BID ID -3186378)

M/s Vimal Traders (BID ID -3192609)

PROTON CONSTRUCTIONS COMPANY (BID ID -3191372)