REPAIR MAINT OF MOTORS PUMPS STARTERS AND ITS CONNECTED ITEMS UNDER GE ARMY DHAR ROAD

Taking out with proper shut down by disconnecting all the electrical connections, dismantling the unsvase 3 Ph induction motor 75KW/100 HP rating alongwith Vertical terbine pump set , four stage (Mode-lBHR 28-18 , Make - kirloskar) installed at Jackwell at GE (Army) Dhar Road from the base plate,column pipe and shifting the Motor to Civil workshop for repair/rewinding. Dismantling the motor, rotor ,shaft, slip rings,carbon brush assembly etc carefully. cutting and removing the old heated up/burnt winding of the stator /rotor, cleaning the slots and replacement of brunt spare parts and re-assembling the motor including transportation back the same after rewinding and re-assembling in same position at the same location, complete all as specified and as directed by Engr -in- Charge. Note:- (a) cost of rewinding will be measured and paid separately. (b) Motor shall be dismantled at workshop and its winding shall be cut in presence of authorised MES rep. (c) Labour for fixing of any type Spare parts will be included. (d) Major Spare parts such as bearing & shaft if found defective will be measured and paid separately. (e) The rates quoted shall be deemed to include the cost of loading/unloading, transportation (To & From), greasing & replacement of worn out nuts, bolts,safety pins, rubber gasket, washers, insulating materials for motor/stator winding etc i.e varnish, cotton tape insulating paper and soldering of any type/size and shape in order to make it functional and testing at its original location/position complete.

Taking out with proper shut down by disconnecting all the electrical connections, dismantling the unsv Vertical terbine pump set , four stage (BHR 28-18) along with 3 Ph induction motor 75KW/100 HP installed at Jackwell at GE (Army) Dhar Road from the base plate,column pipe and shifting the same to Civil workshop for repair of pump set. Dismantling the pump parts such as key, coupling,bush, gland, ring, shaft sleeve,impeller, bearing, nut,bolt,washers,rubber gaskets/oil seals etc any type and size from the pump carefully. Replacement of UNSV spare parts and reassembling & refitting the Pump set complete in same position after testing including transportation complete all as specified and as directed by Engr-in-Charge. Note:- (a) Pump shall be dismantled at workshop in presence of authorised MES rep. (b) The rate includes the labour for fixing of any type Spare parts will be included. (c ) The rates quoted shall be deemed to include the cost of loading/unloading Motor , transportation(To & From), greasing, relacement of worn out nuts, bolts,safety pins, rubber gaskets/oil seals and washers etc of any size and shape duly. (d) Major Spare parts will be measured and paid separately. (e) The rate includes refixing the pumps in its original positioin, testing complete .

All as per Item no 1 above but for repair of 3 Phase induction Motor 55KW/75HP alongwith Centrifugal pump set , Model - DSM 125/40 Make Kirloskar installed at Fresh water sump at Dhar Road complete all as specified and directed by Engr -in- Charge. Note:-(a) to (e) all as per item 1 above

All as per Item no 2 above but for repair of Centrifugal Pump 55KW/75HP alongwith 3 Phase induction Motor , Model - DSM 125/40 Make Kirloskar installed at Fresh water sump at Dhar Road complete all as specified and directed by Engr -in- Charge. Note:-(a) to (e) all as per item 2 above

All as per Item no 1 above but for repair of 3 Ph induction Motor 1.5kw/5kw alongwith Centrifugal pump set , Model - DSM 125/40 Make Kirloskar installed at Fresh water sump at Dhar Road complete all as specified and directed by Engr -in- Charge. Note:-(a) to (e) all as per item 1 above

All as per Item no 1 above but for repair of unserviceable 3 Phase induction motor of 15 KW/20 HP rating alongwith Pump Set make Kirloskar, having RPM 2940,head 300 Mtrs, discharge 7.2 Cubic Meter per Hour installed at Samana Banj Station under GE (A) Dhar Road complete all as specified and directed by Engr -in- Charge. Note:- (a) to (e) all as per item 1 above

All as per Item no 2 above but for repair of Centrifugal Pump of 16 KW/20 HP alongwith 3 Phase induction Motor make Kirloskar , having RPM 2940, head 300 Mtrs, discharge 7.2 Cubic Meter per Hour installed at Samana Banj Station under GE (A) Dhar Road complete all as specified and directed by Engr -in- Charge. Note:-(a) to (e) all as per item 2 above

Taking out with proper shut down by disconnecting all the electrical connections, dismantling the unserviceable Diesel engine driven Kirloskar make having prime mover(Motor) rating 32 HP,24 KW, Speed installed at Samana Banj location under GE (A) Dhar Road from the base plate and shifting the same to civil workshop for repair of pump set. Dismantling the pump parts such as key, coupling,bush, gland, ring, shaft sleeve,impeller, bearing, nut,bolt,washers,rubber gasket etc any type and size from the pump carefully. Replacement of UNSV spare parts and re-assembling the Pump set complete as before including transportation and fixing it back after repairing and testing complete all as specified and directed by Engr -in- Charge. Note:- (a) Pump shall be dismantled at workshop in presence of authorised MES rep. (b) The rate includes the labour for fixing of any type Spare parts will be included. (c) The rates quoted shall be deemed to be included the cost of loading/unloading, transportation from Samanabanj station under GE (A) Dhar Raod, grease, nuts, bolts,pins, rubber gaskets, oil seals and washers etc of any size and shape duly. (d) Major Spare parts will be measured and paid separately. (e) Quoted rate includes refixing the pump with Engine in its original positioin including testing complete all as directed by EIC.

Taking out with proper shut down by disconnecting all the electrical connections, dismantling the unserviceable Diesel engine driven Kirloskar make having prime mover(Motor) rating 15 KW, Speed 2930 Rpm, pump head 280 Mtrs, discharge 7.20 cubic meter/hour, pump inupt 10.67 KW installed at Samana Banj location from the base plate and shifting the same to civil workshop for repair of Engine set. Dismantling the IC Engine parts such as cylinder head ,Fuel pipes, FIP assembly, air/ fuel/ lub oil filters, greasing whereas required including replacement of worn out nut,bolt,washers,rubber gaskets, oil seals etc any type and size from the Engine set carefully. Replacement of UNSV spare parts and reassembling the Engine complete in same position including transportation and reinstalling after repairing and testing complete all as specified and directed by Engr -in- Charge. Note:- (a) Engine shall be dismantled at workshop in presence of authorised MES rep. (b) The rate includes the labour for fixing of any type Spare parts. (c) The rates quoted shall be deemed to include the cost of loading/unloading, transportation(To & from) from Samanabanj station under GE (A) Dhar Raod, grease, nuts, bolts,pins, rubber gaskets, oil seals and washers etc of any size and shape. (d) Major Spare parts will be measured and paid separately. (e) Quoted rate includes refixing the Engine with pump in its original positioin including testing complete all as directed by EIC.

M&L for cleaning of over head tank /under ground sump by scrapping / removing all algae/moss,funges, scales, dust, sludge etc from inner walls & floor of the over head tank and depositing the same to a distance exc. 50 mtrs and n.exc. 100 mtrs including washing the walls & floor of the over head tank with water and disinfection chemical such as bleaching powder etc and writing date of cleaning, Capacity of tank, CA No with synthetic enamel black/white paint complete for 150000 Gallons capacity complete all as specified and directed. (Near Filtration Plant)