Construction of Ayurvedic Health Centre at village Gangoti Tehsil Amb Distt. Una HP SH CO Main Building portion including Water supply and Sanitary Installation Septic Tank and rain water harvesting tank against deposit

Amount

Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavation in earth work and banking in 20 cm (twenty centimeter) layers including breaking clods, ramming and dressing ground for the purpose of making embankment or filling up ground depressions upto any lead and lift as directed by the Engineer in charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as directed by the Engineer in charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded crushed stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortor 1:6 (one cement: six sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etcetera upto any thickness as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string cousrses and the like as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in stair cases with sloping or stepped soffits, excluding landings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in edges of slab and breaks in floor and walls upto any width as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 mechanically mixed (One cement : six sand : twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying reinforced cement concrete M-20 design mix to obtain the minimum compressive strength of 20N/mm² with graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give smooth and even surface and cement contents not less than at the rate of 320 kg (three hundred twenty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in foundation and plinth inclusive as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying reinforced cement concrete M-20 design mix to obtain the minimum compressive strength of 20N/mm² with graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give smooth and even surface and cement contents not less than at the rate of 320 kg (three hundred twenty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in suspended floor roofs landing and shelves and their support balconies, beams, girders bressumers and cantilever upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter) thick cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size and curing complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying a coat of hot bitumen(mexphalt 80-100 or equivalent) using 1.70 kg. per sqmtr. (one point seventy Kilogram per square meter) on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying reinforced cement concrete M-25 design mix to obtain the minimum compressive strength of 25N/mm² with graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give smooth and even surface and cement contents not less than at the rate of 340 kg (three hundred forty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in foundations, footings, bases of columns and the like and mass concrete upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying reinforced cement concrete M-20 design mix to obtain the minimum compressive strength of 20N/mm² with graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give smooth and even surface and cement contents not less than at the rate of 320 kg (three hundred twenty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in mouldings as in cornices windows sills etcetera not exceeding 15cm (fifteen centimeter) in girth upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Tor steel reinforcement approved make i.e. SAIL, RINL,Shyam Steel/TISCO for reinforced cement concrete work including bending binding straightning and placing in position complete including cost of binding wire upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work using common burnt clay Second class building bricks in foundation and plinth in cement mortar 1:6(One cement: six sand) in all heights and depth as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Brick work using common burnt clay Second class building bricks in superstructure in cement mortar 1:6(One cement: six sand) in all heights and depth as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Half brick masonry using common burnt clay Second Class building bricks in superstructure above plinth level upto any floor level/height in cement mortor 1:4 (one cement: four sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry using common burnt clay Second Class building bricks in foundation and plinth above plinth level upto any floor level/height in cement mortor 1:3 (one cement: three sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying cement slurry on reinforcement cement concrete slab or cement concrete work using 2.75 kg. (two point seven five kilogram) of cement per square meter of floor area before laying cement concrete flooring including roughening cleaning of concrete surface complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing anodised aluminium work for doors, window, ventilators and gloazed partitions frames with extruded built up standard tubular and other sections of approved Hindalco, Jindal, Indian Aluminum CO. approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) size 127 x 44.45 x 3.18mm (one hundred twenty seven into four four point four five into three point one eight millimeter) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screwsupto any floor level/height all complete for doors windows and ventilatiors and glazed partitions frames as per architectural drawings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing anodised aluminium work for shutter of doors, windows, ventilators and partitions with extruded built up standard tubular and other sections as approved make of Hindalco, Jindal, Aluminum CO. conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera . Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screwsupto any floor level/height all complete for shutters of doors windows and ventilatiors including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) as per architectural drawingsas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing glazing with glass panes of 4.00mm (four point zero zero millimeter) thickness (weight not less than 10.00 kg/ sqm (ten point zero zero kilogram per square meter) in aluminium door, window, ventilator shutters make of Hindal Co., Jindal, Indian aluminum Co. and partition etcetera with PVC/neoprens gasket etcetera complete upto any floor level/height as per the architectural drawings and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12 mm (twelve millimeter) thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters with frame of second class deodar wood for cup board including nickel plated bright finished piano hinges -25mm (twenty five millimeter)thick frame as per the architectural drawings and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300x16mm(three hundred into sixteen millimeter ) anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etcetera complete any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etcetera complete any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fiflty into ten millimeters) aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeters) aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminum handle anodized transparent or dyed to required color and shade with necessary screws etecetra complete as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing hydraulic door closer ISI marked including all necessary fittings as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per the direction of Engineer-In-Charge including making good the floors as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 200mm (two hundred millimeter) oxidized M.S. hooks and eye as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing mild steel plain grills of required pattern in wooden/steel frames of windows etcetera with mild steel flats, Square or round bars with round headed bolts and nuts or by screws as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Providing and fixing 12mm (twelve millimete) thick 100mm (one hundred millimeter) wide pelmet with 25mm (twenty five millimeter) diameter wooden curtain rods and brackets including fixing 25 x 3mm (twenty five imnto three millimeter) M.S. flat at 10 cm.(ten centimeter) long and plugs etcetera complete in first class deodar wood upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) M.S. double acting spring hinges bright finished with necessary screws etceter complete as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 10 (Ten ) milimetre thick antiskid water proof stain and impact resistant heavy duty vetrified tiles make of Somany, Orient, RAK, Johnson & Johnson of Nitco or Kazaria 600 x 600 x 10mm ( Six hundred into six hundred into ten millimeter) manufactured of approved shade and colour in flooring ,treads of steps and landings laid over 12 (Twelve) milimetre thick cement mortor 1:3 (one cement :three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles as required complete as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying red sand stone slab flooring 40mm (forty millimeter) average thick on 20mm (twenty millimeter) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying granite marble in flooring 20mm (twenty millimeter) (average)thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete any floor level/ height 20mm (twenty millimeter) thick as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Extra for making moulded nosing including returned mouled ends and angles to mouldings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Grade-IV spartic ceremic tiles 5.5 ( Five point five ) milimeter thick in flooring make of Kajaria, NITCO, Somany orient, RAK, Johanson & Johanson {(300x300mm/ 400 x 400 mm (three hundred into three hundred milimeter / four hundred into four hundred millimeter) size treads of steps laid on bed of 12 ( Twelve ) milimeter thick cement mortor 1:3 (one cement :three sand ) finished with flush pointing in white cement complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

White glazed tiles 6 (six) milimeter thick of approved grade make of Kajaria, NITCO, Somany orient, RAK, Johanson & Johanson in skirting ,riser of steps and dado 12 (Twelve) milimeter thick cement mortor 1:3 (one cement :three sand ) and jointed with white cement slurry complete any floor level/ height as per directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeters) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeters) dia meter with prepainted limpet and rubber washers complete with all accesoriees as required as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.60mm (zero point six zero millimeter ) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets of TATA Durashine with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing valley 60 cm (sixty millimeter) overall 0.60mm (zero point six zero millimeter ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet of TATA Durashine with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) dia pipe on wall face PVC (Finolex Supreme, AKG, Prince, Kisan, SFMC, Diplast make) rain water pipes of working pressure not less than 4.5 kg/sq. cm (four point five kilogramme per square centimeter) including filling the joints with approved adhesive complete upto any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PVC Plain bend 150mm (one hundred fifty millimeters) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PVC Plain bend 150mm (one hundred fifty millimeter) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeters) diameter for C.I.pipe M.S..holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten certimeters) of 1:2:4:mix (one cement : two sand :four graded / crushed stone aggregate 20 mm (twenty millimeters) nominal size and cost of cutting holes and making good the wall etecetra as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S.fan clamp type -1 of 16 mm (sixteen millimeter) dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 0.63mm (zero point six three millimeter s) thick 15 cm (fifteen centimeter s) wide 45 cm (forty five centimeter s) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm (forlty into three millimeter s) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make i.e.TATA/JINDAL Udyog (Rajpura),including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings complete upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (one cement :three sand) over a 12 mm (twelve millimeter) layer of cement mortar 1:3 (one cement :three sand ) and finished neat upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimeter) dia M.S. pipe hand rail slip resistant with round end at two level i.e. 75cm (seventy five centimeter) and 90cm (ninety centimeter) height and extend 30 cm (thirty centimeter) beyond the top and bottom of the ramp and 25mm (twenty five millimeter) dia M.S. pipe baluster welded to 50mm (fifty millimeter) dia MS pipe embedded in cement mortor 1:3:6 (one cement: three sand: six graded/crushed stone aggregate 20mm (twnety millimeter) nominal size in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat make of ICI, Nerolac, Berger, Assian Paint, Shalimar over new steel and other metal surfacesurfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting two coats make of ICI, Nerolac, Berger, Assian Paint, Shalimar (excluding priming coat)on new steel and other metal surfaces with enamel paint other than white brushing to give an even shade including cleaning of all dirt,dust and other foreign matter complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat over make of ICI, Nerolac, Berger, Asian Paint, Shalimar new concreete /masonary/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering required with readymixed primer in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

6mm (six millimeters) Cement plaster to ceiling in cement mortor 1:3 (one cement: three sand) as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeters) Cement plaster in single coat on the fair side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeters) in girth and finished even and smooth in cement mortor 1:6 (one cement: six sand) as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeters) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeters) in girth and finished even and smooth in cement mortor 1:6 (one cement: six sand) as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Wall painting (two coats) with acrylic emulsion paint of Nerolac, Berger (Bison Acrylic) Assian Pains (Tractor Acrylic) , Shalimar make for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed or dry brick/stone/aggregate 40mm (forty millimeter) nominal size, well rammed and consolidated and grouted with fine sand including preparation of ground as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cm (fifteen into twenty two centimeter s) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (One Cement: three Sand) including earth work and laying 10 cm (ten centimeter s) cement concrete in 1:5:10 (One Cement : five Sand : ten graded/crushed stone aggregate) of 40 mm (forty millimeter s) nominal size and 7.5 cm (seven point five centimeter s) cement concrete 1:2:4 (One Cement : Two Sand : Four Graded/crushed stone aggregate of 20 mm (twenty millimeter s) nominal size and finished with a floating coat of neat cement complete as per standard design and as per direction of Engineer-in-charge including all leads and lifts and other incidential complete as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Excavation in drain and channel etcetera in earth work in all classification of soil such as pick jumper work blasting work in soft soil and hard rock saturated soil any other mixed varity of soil in dry of saturated conditions upto any depth and lift/height including dressing of side bed and disposing of all surplus excavated earth upto all lead disposed earth to be levelled and neatly dressed as per the direction by Engineer in charge including entire carriage of material with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeter) nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) as per the direction by Engineer in charge including entire carriage of material with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 15mm (fifteen millimeter) to wall ceiling and floor, galvanised mild steel tubes (medium grade), tube fittings and clamps complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeter) to wall ceiling and floor, galvanised mild steel tubes (medium grade), tube fittings and clamps complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm (twenty millimeter) to 40mm (forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipes complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1000 (one thousand) litres net capacity tank three layers technology Sixtax water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia high pressure PVC spigot and socket,waste and ventilating pipes make of kitech D-plast/ Finolex heavy working pressure 6.00 kg. per sqcm (six point zero zero kilogram per square centimeter) including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia high pressure PVC spigotand socket,waste and ventilating pipes make of kitech D-plast/ Finolex heavy working pressure 4.00 kg. per sqcm (four point zero zero kilogram per square centimeter) including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC single equal branch with oval access door, make of kitech insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC door bend with oval access door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts make of Finolex complete including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 63mm (sixty three millimeter) dia PVC single equal branch with oval access door, make of kitech insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC Collars make of Finolex including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC Collars make of Finolex including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimeter) dia PVC door bend with oval access door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm x 90mm (one hundred ten millimeter into ninety millimeter) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC cowl make of Finolex in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC cowl make of Finolex in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing orrisa pattern vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (five hundred eighty millimeter) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing ordinary closet vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Anglo Indian Universal vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT coloured/white high density polyethylene / poly propylene CERA/Hindware MAKE 10(ten) litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing G.I. Inlet connection make of BST, Jindal, Tata Steel, Parkash Surya for flush pipe with W.C. Pan in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing solid type white plastic seat and cover make of Commandor, Diplomat, Hindware, Hindustan for wash down water closet with C.P. Brass hinges and rubber buffers in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing vitreous China squatting plate pattern urinal JAQUAR/kingston make of size 450mm x350mm (four hundred fifty millimeter into three hundred fifty millimeter) with integral longitudinal flush pipe as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 10 (ten) litres capacity Vitreous China automatic flushing cistern JAQUAR/kingston make with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass flush pipe / spreaders for urinal with fitting such as unions, clamps etc. (all in C.P. Brass) including cutting holes and making good the same make of BST, Jindal, Tata Steel, Parkash Surya for flush pipe with W.C. Pan in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Flat back 550mm x 400mm (five hundred fifty millimeter into four hundred millimeter) vitreous China wash basin make of Parryware, Hindware, Saintarywase,, Naycer, Cera Cat No. 1025 or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 470 x 420 mm (four hundred seventy into four hundred twenty millimeter) with bowl depth178 mm (one hundred seventy eight millimeter) stainless steel kitchen sink of approved standard ISI No. 1022XD of Prayag India Polymers with C.I. Or M.S brackets, painted white including cutting holes in walls and making good the same but including fittings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing vitreous China pedestal make of Kingston, Gem, Parko, Techno , Jal, Jaquor for wash basin complete recessed at the back for the reception of pipes and fittings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia C.P. Brass waste (heavy duty make of Kingston, Gem, Parko, Techno , Jal, Jaquor for wash basin or sink in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass Pillar tap (heavy duty make of Zoloto Sani,L&K,Leader, Jaquar with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass stop cock (heavy duty make of Zoloto Sani,L&K,Leader, Jaquar with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass Angle valve (heavy duty make of Zoloto Sani,L&K,Leader, Jaquar with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore P.V.C connection make of Finolex 300/450mm (three hundred oblic four hundred fifty millimeter) length with brass unions as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass full way valve make of Leader, Zoloto, Kilburn, CIM, Valves,Sam with wheel in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm x 15mm (twenty millimeter into fifteen millimeter) PTMT Push Cock of Prayag with reducer of approved quality and colour in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT jet spray make of Viking, Prayag of approved quality and colour with one metre tubeas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying cast iron cover without frame for manholes for frame of internal dimension 455mm x 610mm (four hundred fifty five millimeter into six hundred ten millimeter) rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg (twenty three kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying cast iron cover without frame for manholes for frame of 500mm (five hundred millimeter) internal diameter C.I. cover (medium duty) the weight of cover to be not less than 58kg. (fifty six kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing grab bars in handicaped toilet of CP 40mm (forlty millimeter) dia steel pipes 78 cm (seventy eighty centimeter) heighwelded with MS plate as per detail and position of WC seat in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimeters nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimeters nominal size) inside plastering 15mm (Fifteen milimeters) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimeters nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimeters) and 500mm(Five hundred milimeters) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten milimeters) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (two hundred millimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) complete as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1:2:4 mix(One cement: Two sand: Four graded crushed stone aggregate 20mm (twenty millimeter) nominal size foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty millimeter nominal size) inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimeter nominal size) finished smooth complete in cluding curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimeter ) and 1.00 mtrs(One meter) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten millimeter ) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kgs(twenty three kilogram) and weight of frame 15 Kgs (Fifteen kilogram) with 200mm (two hundred millimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) complete in all respects as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling crushed stone aggregate of different sizes in soak pit as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Sandeep Kumar Dhiman

Sushil Kumar

SAURABH SHARMA GOVT. CONTT.

Sanjay Kumar