MP Fund 2023-24 - Marungoor Town Panchayat

Amount

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification

Plain Cement Concrete 1:4:8 (One Cement, Four Sand and Eight aggregate) mix using 40mm ISS HBG metal including cost and conveyance and all labour charges etc. complete.

Supplying and errecting Steel Shuttering including necessary supports for plane sufaces in foundation and in all floors for RCC Plinth Beams , using mild steel sheets of suitable size 90cm x 60cm and 10 gauge stiffened with including all labour charges etc., complete. (Footing , grade beam)

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification (RCC Slab)

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification (Column work )

R.C.C.1:1 1/2:3 mix using 20mm ISS HBG metal including Cost and conveyance and all labour charges for mixing laying finishing and curing etc complete but excluding cost of steel & Centering charges etc., complete as per SS(up to basement)

R.C.C.1:1 1/2:3 mix using 20mm ISS HBG metal including Cost and conveyance and all labour charges for mixing laying finishing and curing etc complete but excluding cost of steel & Centering charges etc., complete as per SS (Ground Floor)

Supply and fabricating and placing in position of steel Reinforcement using Mild steel of Ribbed tor steel rods for all RCC works as per the design given by the department officers including cost of steel and binding wire and all labour charges for cutting bending and tying and placing in position etc., complete as per SS

Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of II class chamber bricks of size (8 3/4"x41/4"x 23/4" ) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Special Ceiling Plastering with cm 1:3 mix (One Cement and Three Sand), 10mm thick including concrete surface cleaning, finishing, curing and all labour charges etc complete as per standard specification.

Plastering with cm 1:4 mix (One Cement and Five Sand), 12mm thick cost and conveyance of all materials finishing, curing and all labour charges etc complete as per standard specification.

Supply and fixing of steel Windows,with suitable design including cost of materials,welding and conveyance of all materials to site locking arrangements and painting one coat of primer including cost and conveyance and all labour charges etc. complete.

Supply and fixing of steel Doors,with suitable design including cost of materials,welding and conveyance of all materials to site locking arrangements and painting one coat of primer including cost and conveyance and all labour charges etc. complete.

Paving the floor with Plain/Design Ceramic tiles ( Colour and shade as directed ) of Vitrified Tiles of size 600 x 600 x 8mm in all floors over a base layer of cm 1:3 mix 20mm thick laid in situ and pointed with same coloured cement ( white cement mixed with colouring pigment ) neatly and fixed in position so as to make it perfectly smooth and shining,to the alignment etc.complete complying with standared specifications and as directed by the departmental officers. The sample colour and shade of the ceramic tiles should be got approved from the departmental officers before use in the works

Floor Finishing First Quality Design Ceramic tiles of All colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete

Dadooing with glazed tiles of 300mm*200mm*6mm size of approved quality and colour set in c.m 1:2mix (one cement and two sand) 10 mm thick and pointing with white cement using 0.4 kg /m2 neatly as directed -including cost of all materials and labour charges etc complete as per SS

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)

Painting two coats over new iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS

Wiring with 2x1.5 sqmm PVC unsheathed Sc. Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch in fush with wall with 3mm thick hylum sheet cover for making good of the coneal3ed portion with suitable colour for PVC concealed light point (Assume 5points per coil). (SD 25)

Wiring with 2 x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, wtih 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD 38)

Wiring with 2 x 4sqmm (56/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, wtih 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 15A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD 40)

Supply and fixing of 16 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board with PWD Earthing (SD-141)

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD-125)

Providing and fixing 4" dia PVC rain water down fall pipes with necessary PVCshoes, pvcbends, other specials clamps, screws, nails, teekwood plucks etc, complete including cost of all materials and labour charges as per SS. for 110mm dia pipe 4 kg. per cm2

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position

Supplying & Fixing in position of white glazed Indian type water closet with 'P' (or) 'S' trap and Orissa slope set in brick jelly cement concrete 1:4:8 100mm thick using 20mm thick brick jelly ISS gauge and finished to sludge out any leakage and defalut including cost of WC 'P' (or) 'S' trap and foot rest etc., complete

Supplying and fixing in position SS elbow Action tap of size 15 MM including all labour charges ..etc

Supplying and fixing in position SS elbow Down tap of size 20 MM including all labour charges ..etc

75mm PVC elbow 4 K.g

75mm PVC door elbow 4 K.g

75mm PVC 45 elbow 4 K.g

110mm PVC door elbow

110mm PVC45 elbow

32mm PVC elbow

25mm PVC elbow

32mm PVC Tee

25mm PVC Tee

32mmx25mm PVC tee

25mmx20mm PVC Tee

32mmx25mmPVC Reducer

110mm PVC elbow

25mm PVC endcap

40mm PVC pipe

40mm PVC End cap

110mm PVC bend

110mmPVC Y

20mm PVC Pipe

20mmPVC Tee

20mm GI Elbow

20mm G.I tee

25mm/15mm GI Reduer

40mm PVC Bend

40mm PVC 45 elbow

40mm PVC FTA

40mm PVC Union

40mm PVC Tee

40x32mm PVC Reducer

32 mm PVC 45 Elbow

32mm PVC coupler

15mm PVC tap

shawer

Angle cock

15 mm Plate Tap

15mm Angle coach

50mm PVC pipe

50mm PVC Tee

50mm PVC Bend

50mm PVC Endcap

110mm PVC Endcap

Supplying and fixing position 32 mm Gunmetal Gate valve with ISI mark including cost labour charge etc complete ...

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of PCC 1:4:8 and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. (1000 litre)

TMR BUILDERS