REPAIR AND REPLACEMENT OF B/R WORKS AT R CENTER AND 25 AAD UNDER AGE B/R III, AT BB CANTT, SRINAGAR

Taking down chowkhats/frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Taking down chowkhats/frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each, complete all as specified and directed.

S&F for 2nd class hard-wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton door shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a), complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled door shutter any number of panel with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated, complete all as specified and directed.

M&L for aluminium anodised powder coated sections of approved and required size for door / windows frames or chowkats / partitions / shutters, sliding channels / tracks etc including jointing cleats, MS nut & bolts or steel screws, dash fasteners, rowel plug for fixing of screws in wall or floor etc., complete all as specified and as directed.

S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, EPDM beading, handles 2 Nos, 01 X lock with duplicate key & 03 x hinges 100 mm in each door, anodised aluminum snap beading, screws etc and 12 mm thick particle board in lower panel ad 5 mm thick glass in upper panel and any other accessory required, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified.