REPAIR AND POLISHING OF WOODEN FURNITURE (FD/MAP) OF OMQS/SMQS/SINGLE ACCN AT 7 AFH KANPUR CANTT

Amount

Chair writing ( FD 280,FD 202,FD 261, FD 148) :- Replacement of the following old damaged/ decayed parts of chair writing with new parts made of Ist class new teak seasoned wood complet all as specified and shown on drg.

Front leg to Chair

Rear legs

Right or front or rear or Left rails of Seats with canning holes

Stiffener

Top Rails

Arms to Chair

Chair dinning ( FD 279 , FD 270, FD 262 ) :- Replacement of the following old damaged/ decayed parts of chair dinning with new parts made of Ist class new (teak )seasoned wood complete all as specified and shown on drg.

Front leg to Chair

Ready made rear leg to Chair

S&F right or front or rear or Left rails of Seats with canning holes

Stiffener

Back Rest stiffener

Chair Easy ( FD 229 ) :- Replacement of the following old damaged/ decayed parts of chair Easy with new parts made of Ist class new teak seasoned woodcomplete all as specified and shown on drg.

Front leg

Rear leg

Front, Rear, Side rails of seat with canning Holes

BED PLY WOOD TOP ( FD 246) ;- Dismantling of old U/S Existing ply wood top from Bed Ply Wood Top and S & F of new top 12 mm thick ply wood commercial face BWR Grade of same shape and size rest all as per Drg and as Directed by Engr-in-Charge

Dismantling of old U/S teak face ply wood 4 mm thick from Head Board and S & F new 4 mm thick one side teak face on both side of Head Board with 4 mm thick teak wood beading around the head board after repairing the complete head board. Rest all as per drg and as directed by Engr-in-Charge.

All as per item No.4.02 above But Foot board.

Removing of old U/S Leg of Bed Ply Wood top and S & F of new Leg made of seasoned sheesham wood to the same shape and size and as specified in drg and as directed by Engr-in-Charge.

Removing of old U/S long Rail of Bed Ply Wood top and S & F of new long rail made of well seasoned sheesham wood of same size and shape as per drg and as directed by Engr-in-Charge.

TABLE BED SIDE ( FD 276) :- Taking out old unseviceable components of table bed side as and where required from table bed side and S&F new components of existing shape and size all as specified on drawing and directed with following components.

Sides made of 18mm thick veneered teak face particle board exterior grade

Top made out of 18mm thick veeneared teak face particle board exterior grade with 1.5mm thick plastic laminated sheet on top

Bottom made out of 18mm thick veneered teak wood particle board, exterior grade

Shelves made out of 12mm thick veneered teak face particle board, exterior grade

Back ply 6mm thick plywood, BWR grade, commercial type

Table dressing ladies with Mirror (FD 251)& Table dressing ladies w/m & stool (D/E6/MAP-II/07) :-Taking out old U/S component of table dressing ladies as and where required and S&F of new components of existing shape and size as specified on drawing and directed with following components:-

Top made of 18mm thick prelaminated Particle board exterior grade, one side decorative with 3mm thick teak wood beading all around.

4mm thick mirror & 6mm thick plywood commercial type at back

4mm thick mirror & 6mm thick plywood commercial type at back

Brass knob best quality as per drg and directed by Engr-in-charge .

Removing of U/S cushion for stool table dressing ladies S&F new cushion of size 315 x 365mm and 40 density covered with leatherite as specified.

Removing of U/S ply openable shutter for stool table dressing ladies S&F new ply of size 315x365mmx12mm thick ply openable shutter as specified.

TABLE DRESSING GENTS (FD 230 );- Taking out old U/S component of table dressing gents as and where required and S&F of new components of existing shape and size all as specified on drawing and directed with following components:-

5.5 mm thick mirror & 6mm thick plywood commercial type at back

Drawer with front of 18mm thick prelaminated Particle board, exterior grade, one side decorative other sides of 12mm thick teak wood planks and bottom with 6mm thick plywood commercial grade

Top made of 18mm thick prelaminated particle Particle exterior grade, one side decorative with 3mm thick teak wood beading all around.

Brass knob best quality as per drg and directed by Engr-in-charge .

TABLE CENTRE ( FD 274) :- (a) Taking out old U/S top of table centre and S&F new top of 18mm thick prelaminated Particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Taking out old U/S legs of table centre and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No 8 .02 here in before but short rail.

All as per item No 8.02 here in before but long rail.

All as per item No 8.02 here in before but stiffener.

Table 3'x2' with and w/o drawer ( FD 224 , FD 231, FD 283 , FD 284 ) Taking out old U/S top of table 3'x2' and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge .

Taking out old U/S legs of table 3'x2' and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No 9 .02 here in before but short rail.

All as per item No 9.02 here in before but long rail.

Taking out old damaged/decayed drawer from its position and S & F new drawer as per existing shape & size made out of well seasoned teak wood and 6mm thick plywood consisting 3 Nos of ply on the bottom of the drawer complete all as specified & shown on drgs.

All as per item No 9.02 here in before but stiffener.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

Table peg ( FD 277 ) :- Taking out old U/S top of table peg and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge .

Taking out old U/S legs of table peg and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No 10 .02 here in before but side rail.

All as per item No 10 .02 here in before but stiffener.

Table Writing (FD 249 ) :- Taking out old U/S top of table writing and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge.

Taking out old U/S Stiffener of table Writing and S & F NEW Stiffener made of seasoned sheesham wood as per drawing and directed by Engr-in-charge

Taking out old U/S drawer and S&F new drawer of 18mm thick prelaminated particle board exterior grade one side decorative and bottom with 6mm thick plywood commercial grade complete all as shown in drg and directed by Engr-in-Charge.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

Teapoy (FD 284 ) :- Taking out old U/S top of teapoy and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Taking out old U/S leg of teapoy and S&F new leg to be made of seasoned sheesham wood same shape & size and directed by Engr-in-Charge

All as per item No. 12.02 here in before but side rail

All as per item No.12.02 here in before but stiffener

Table Dining 6 Pers/8 Pers ( FD 378) :- Taking out old U/S top of table dining 6 pers/8 pers and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drg and directed by Engr-in-Charge

Taking out old U/S legs of table dining 6 pers/8 pers and S&F new legs of well-seasoned sheesham wood of existing shape and size all as specified shown on drg and directed by Engr-in-Charge.

All as per item No. 13.02 but new short rail.

All as per item No.13.02 but new long rail.

Side board( FD 26,FD 241,FD 371):- Taking out old U/S front single door of side board and S&F new door made of 18mm thick prelaminated Particle board, exterior gade, one side teak face and white laminated on other side and providing 4mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S side of side board and S&F new side made of 18mm thick prelaminated Particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed

Taking out old U/S back portion plywood of side board and S&F of new plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed

Taking out old U/S top board of side board and S&F new top board made of 18mm thick prelaminated Particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S bottom portion board of side board and S&F of new bottom board made of 18mm thick, prelaminated prarticle board, extrerior garde both face white laminated complete all as specified on drawing and directed .

Taking out old U/S drawer of side board and S&F of new drawer to be made of 12mm thick, well seasoned sheesham wood planks and 6mm thick commercial ply at bottom of drawers complete all as specified on drawing and directed.

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge ..

Book case (FD 234) :- Taking out old U/S front single door of book case and S&F new door made of 18mm thick prelaminated particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S side of book case and S&F new side made of 18mm thick prelaminated Particle board, exterior grade, one side teak face and white laminated on other side complete all as specified on drawing and directed

Taking out old U/S back portion plywood of book case and S&F of new plywood 6mm thick, BWR grade, commercial all as specified on drawing and directed

Taking out old U/S top board of book case and S&F new top board made of 18mm thick prelaminated Particle board, exterior gade, one side teak face and white laminated on other side and providing 3mm thick teak wood beading all-round the top all as specified on drawing and directed.

Taking out old U/S bottom portion board of book case and S&F of new bottom board made of 18mm thick, prelaminated Particle board, extrerior garde both face white laminated complete all as specified on drawing and directed

Removing of U/S knob and S&F new brass knob best quality as per drg and directed by Engr-in-charge .

Sofa set 5 seated /sofaset 4 seated (a) Taking out old U/s Broken front leg from Sofa set 5 Seated and S & F New leg to be made of seasoned sheesham wood same shape and size as specified and directed by Engr –in-Charge

All as per Item No. 16.01 above but rear leg

All as per Item No. 16.01 above but Arms

All as per Item No. 16.01 above but Batten

Replacing of existing old cushion foam size 22”x21”x4” from seat and back of Sofa set and supply and fixing of new cushion foam 22”x21”x4” (U Foam) 32 density & covered with cloth tapestry as per sample Kept in Furniture Yard approved by GE (Cost of tapestry cloth not less than Rs 240/- per meters) all as specified and directed by Engr-in-Charge.

Chair all type- Recanning of chairs CBA/CBB wooden and chair bin soiled linen, chair Easy, Chair dining, Chair writing etc with 2mm wide new plastic cane and 0.4mm thick cream/white half round seat and back and border to be covered with 3 to 4 mm wide ½ round cane complete all as specified and shown in drawing.

Almirah Large/Med with shelves wooden ( DB 3941 & 3942):- Removing old u/s Shelves of almirah large/Med wooden and S&F new shelves made out of teak wood all as per drawing and directed by GE/Engr - in - charge

Removing old u/s top of almirah large/med wooden and S&F new top made out of new teak wood all as per drawing and directed by GE/Engr-in -charge

Removing old u/s base complete with legs frame and S&F new base complete with legs all as per drawing and directed by GE/Engr-in -charge

M&L for preparation of Almirah Large/Med with shelves wooden old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown in drgs and as directed:-

SHRI SHAYAM KRIPA (BID ID -3103434)

GUJRAL BUILDERS (BID ID -3118993)