Providing additional street light poles near rear side of CRF Annex, front side of CCC, Adke circle to Society circle, Mechanical department to WROE department, eastern side of Vikram Sarabhai guest house and Swimming pool road.

Amount

Street light pole: Fabricating, supplying and erection of 6 m - Top 70 mm and Bottom 130 mm dia... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm, top. mm with 3 mm thick, suitable base plate and 4Nos of long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.

Single Arm Bracket: Supplying, and fixing of Single Arm Bracket with 1000 mm Standard 40/50 mm dia Hot dip Galvanized M.S. Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.

Supplying of 4 Core 16 Sqmm, , 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. Make: Finolex / Havells / Polycab / Glostar

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff, In existing Trench(2.5 to 25 sqmm)

Supplying & fixing miniature circuit breakers of 10 Amp DP on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898, Make: ABB / Legrand / L&T / Havells

Supply and installation /fixing/ provision of pole Box 260 mm x 210 mm x 116 mm with HRC fuse/MCB provision and suitable connector/terminal for 3 phase / 1 phase connections with Loop in & Loop out terminals for 10 Sq. mm / Sq. mm C Al/Ar/Cu/Ar Cable, enclosed I a Thermoplastic, Polystyrene enclosure, which should be shock proof safe IP65, Dust Proof, water proof having Internally embedded gasket with provision for cable Entry through IP 65 thermoplastic polyamide glands and grommets.

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. For street light pole foundation work.

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including shuttering, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications : M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, pipes for cable entry. For street light pole foundation work.

Wiring for Power Circuit: Wiring for lighting/power circuit using 2 run X 4 sq.mm and 1 run X 2.5 sq.mm PVC insulated 1100V grade multistrand copper conductor single core cable in open or concealed system of wiring. Make: Finolex / Polycab / Havells / Anchor / V-guard / L&T.

Supplying heavy gauge PVC conduit pipe 19/20mm dia and 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700 mm using WF screws.

Supplying and terminating of 16 sqmm tinned Aluminium lugs and crimping and wiring to terminal point for wire of following sizes

Providing and fixing 32mm nominal dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

Dismantling of existing 5 to 7mtr long street light pole/RCC pole with foundation, brackets, acsr, insulators and fittings using mechanical/manual means and transporting/stacking it in the place as suggested by the Engineer In charge

Supplying and drawing 3C x 2.5 mm2 Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and(Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990

Supplying & Fixing Chemical earthling Using 6ft. Copper bonded rod with backfill compound for grounding. Conduits, IC cutouts & other equipments back fill compound which is noncorrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, nontoxic, weather resistance & capable of achieving ohmic value less than one ohm and welding works,CC chamber of 400 x400x400 mm with a cast iron cover and naming of pits, etc( Authorisation certificate should be submitted if needed)

Supply and fixing of LED Streetlight 70W Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. Note: Comprehensive warranty of 5 years including removing of faulty fittings and refixing of repaired/new fittings using necessary scaffoldings/skylift etc within 5 days from the date of complaint. Failing which necessary deduction will be made in the security deposit amount. Make: Phillips / Bajaj /Havells / Jaguar.

Wiring for lighting/power circuit using 1 run X 4 sq.mm PVC insulated 1100V grade multistrand copper conductor single core cable in open or concealed system of wiring. Make: Finolex / Havels / Anchor / RR cable

Supplying and fixing of 25 mm heavy duty cable glands suitable for UG cable of 1.1 KV class.

DSOUZA ELECTRICALS (BID ID -3253910)

SUDHIR ELECTRICALS (BID ID -3252025)

M/s Anugraha power services (BID ID -3253856)

ANU ELECTRICALS (BID ID -3253338)

SHRI SOMALINGESHWARA ELECTRICALS (BID ID -3254507)

B R ENGINEERS (BID ID -3253846)

Bidder Name

Raaj power solutions and facilities