SPECIAL REPAIR TO BLOCK NOs P-39 TO P-52 (ORs MD ACCN) AT BANA ENCLAVE UNDER GE (S) MAMUN AT MAMUN MIL STN

Amount

Taking down cement/grit plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour for 15 mm thick rendering in two layers (5 mm thick in CM 1:4 over 10 mm thick in cement mortar 1:4) mixing with WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement all as specified. (Note:- WPC shall be measured and paid seperately)

Material and labour for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position not otherwise specifically provided for, complete all as specified.

Material and labour for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and directed.

Material and labour for 25mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor, finished even & fair to receive floor finishes, complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes including dismantling floor, hearth or wall tiling, complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) rough finished and dismantling floor, hearth or wall tiling including cement mortar bedding, complete all as specified and directed.

Taking down chowkats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down chowkats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.

Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing of 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified.

Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

Supply and fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement from stiles and plained colour PVC sheet to be fitted with MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and jointing together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified.

Material and labour for Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 grade-E-165, complete all as specified.

Supply and fixing of 18 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge. Note: Piano hinges/soft close clip on concealed hinges shall be measured and paid separately

Supply and fixing of continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified.

Supply and fixing of Aluminium handle, cast type, anodised, 150mm long (ISI marked), complete all as specified.

Supply and fixing of 100mm size hasp & staple, aluminium, safety type, including bolt to hinge plate and fixed with screws, complete all as specified.

Supply and fixing of 150 mm long aluminium anodised, barrel tower bolts of ex- truded section and fixed, complete all as specified and directed.

Supply and fixing of extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified.

Supply and fixing of 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified.

Supply and fixing in repair PVC(SWR) pipes 110mm dia bore, single socketd , in any length with rubber ring joints , in any length fixed to walls with and including clamps complete all as specified and directed.

Supply and fixing in repair Stack clamps out of 50 mm by 5 mm flat and 16mm dia round iron strip and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe complete all as specified and directed.

Supply and fixing in repair 110mm bore PVC (SWR) branch piece bore single (Single Y ) equal or unequal, complete all as specified and directed.

Supply and fixing in repair 110mm bore PVC (SWR) junction single (Single T ) equal or unequal, complete all as specified and directed.

Supply and fixing in repair PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 110mm, complete all as specified

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

Supply and fixing in repairs PVC flushing cistern 10 ltr capacity including PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

Supply and fixing of Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed.

Supply and fixing in repair PVC tank cover for 500/1000 litre, complete all as specified

Supply and fixing in repair 15mm bore Brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

Supply and fixing in repair 15mm bore Brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

Supply and fixing in repair towel rail chromium plated 600 mm long complete all as specified and directed.

Supply and fixing in repair chromium plated Shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing in repair 15mm bore Stop/Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

Supply and fixing in repair 15mm bore Stop valve concealed cast copper alloy (ISI Marked) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

Supply and fixing in repair 15mm bore Bib tap, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing in repair 40mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) complete all as specified and directed.

Supply and fixing in repair 32mm dia corrugated wate pipe suitable for WHBs/sinks including threaded PVC socket suitable for shank of waste coupling, complete all as specified and directed.

Supply and fixing in repair 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1.5 metre long with S.S. tringular plate for Eureopean type W.C., complete all as specified and directed.

Supply and fixing in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified.

Supply and fixing in reapir Stainless steel Grating doom 100mm dia complete fixing in floors, complete all as specified and directed.

Supply and fixing in repair Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors, complete all as specified and directed.

Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule for bore of pipe 20mm, complete all as specified.

Supply and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling including taking down unserviceable tubing etc complete all all as specified.

Material and labour for Cutting existing 15/20mm steel tubing for alterations or additions (Each cut measured) in position without taking down, all as specified.

Supply and fixing in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap including Supply and fixing of PVC seat cover for pedestal pan, complete all as specified and as directed.

Supply and fixing in repairs Vitreous china wash basin, white flat back of size 550x400mm, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed with copling 32mm size full thread, complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips, complete all as specified.

Material and labour for 4 mm sheet glass , ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work with putty of fixed with beads/ clips etc omplete all as specified.

Material and labour for 4 mm sheet glass , ordinary quality in square or rectangle exc 0.5 sqm each pane fixed to framed work with putty of fixed with beads/ clips etc omplete all as specified.

Material and labour for premirror polished Marble Green/Bhaisiana Zebra 18 to 20mm thick in single piece in steps (tread and risers) or cooking platform and floor jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15mm thick screed bed in CM 1:4 or 10 mm thick backing coat in verticle surfaces complete all as specified and directed incl rounding edges and demoliition of existing stone slab of any type and description, complete all as specified and directed.

Supply and fixing in reapir Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 915x460mm with bowl size 410x330x160mm including CP waste coupling, 32mm dia waste pipe and making disturbed surface to match with existing surface, complete all as specified & directed.

Supply and fixing in reapir Stainless steel kitchen plate rack of size 750mmx900mm, made of stainless steel 1mm thick, fixed with plastic plugs and mild steel screws, complete all as specified & directed.

Material and labour for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over a coat of primer, complete all as specified & directed.

Material and labour for prepairing old surfaces of wall and applying one coats of oil bound distemper, complete all as specified & directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

Material and labour for Preparation of old painted surface of steel of any discription exc 10cm width or girth and providing one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparing of old wooden surface of any description exc 10 cm width or girth & applying one coats of synthetic enamel paint all as specified and directed.

Material and labour for preparing of new wooden surface of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer.

Material and labour for preparation of new plastered surface of wall by applying two coat of Acrylic Smooth exterior paint of required shade @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm, complete all as specified and directed.

Supply only liquid water proofing compound complete all as directed.

VIMAL TRADERS AND SUPPLIERS

M/S DUGGAL CONSTRUCTION CO

Paramjit Singh and Co