Loading
Loading…
Loading…
Tender Value
₹92.3 L
EMD Value
₹1.8 L
Closing Date
15 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
17 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
Tenderer should have valid "A" class electrical contractor license issued by electrical inspector to state government and submit it along with the Bid offer. If "A" class electrical contractor license has been expired, tenderer should also submit the receipt of renewal electrical contractor license issued by electrical inspector to state government, along with bid offer. At the time of contract agreement, contractor must submit valid "A" class electrical contractor license issued by electrical inspector to state government. If tenderer have not submit the valid "A" class electrical contractor license/receipt of renewal for electrical contractor license, the offer will be summarily rejected."
25 conditions · 11 needing a document upload
Documents to be Submitted Along with Tender (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) Following documents shall be submitted by the tenderer:(a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. (c) Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). (d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet). (e) Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
(f) LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). (g) Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
(iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of Works completed in last three financial years giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. All tenderers ensure that this Para/Clause of GCC should be a part of Board of resolution and Power of attorney.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
INDIAN RAILWAY STANDARD GERNERAL CONDITION OF CONTRACT is available on the Indian Railways website. Tenderers are requested to visit the website and be aware of the Terms and Conditions of GCC.
Security Deposit: The Security Deposit shall be 5% of the contract value. The Bid Security submitted by the Contractor with his tender will be retained/encashed by the Railways as part of security for the due and faithful fulfillment of the contract by the Contractor. Provided further that, if Contractor submits the Cash or Term Deposit Receipt issued from a Scheduled commercial bank of India or irrevocable Bank Guarantee Bond from a Scheduled commercial bank of India, either towards the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security, to the Contractor. Balance of Security Deposit may be deposited by the Contractor in cash or Term Deposit Receipt issued from Scheduled commercial bank of India or irrevocable Bank Guarantee bond issued from Scheduled commercial bank of India, or may be recovered at the rate of 6% of the bill amount till the full Security Deposit is recovered. Provided also that in case of defaulting Contractor, the Railway may retain any amount due for payment to the Contractor on the pending "on account bills" so that the amounts so retained (including amount guaranteed through Performance Guarantee) may not exceed 10% of the total value of the contract. The Irrevocable Bank Guarantee submitted towards Security deposit shall be initially valid up to the stipulated date of Maintenance period plus 60 days and shall be extended from time to time, depending upon extension of contract granted in terms of Clause 17A and 17B of the Standard General Conditions of Contract. Note: Security Deposit deposited in cash by the Contractor or recovered from the running bills of a Contractor or submitted by contractor as Term Deposit Receipt(s) can be refunded/returned to the contractor, in lieu of irrevocable Bank Guarantee bond issued from scheduled commercial bank of India, to be submitted by him, for an amount equal to or more than the already available Security Deposit, provided however that, in a contract of value less than Rs. 50 Crore, such refund/ return of the already available Security Deposit is permitted up to two times and in a contract of value equal to or more than Rs. 50 Crore, such refund / return of the already available Security Deposit is permitted up to three times.
The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22ndday after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
The successful bidder shall submit the Performance Guarantee (PG) amounting to 5% of the original contract value and 5% Additional Performance Guarantee in case of tenderer's quoted bid is below (-)5% of the tender cost , in any of the following forms:- (i) A deposit of Cash; (ii) Irrevocable Bank Guarantee;(iii) Government Securities including State Loan Bonds at 5% below the market value; (iv) Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India; (v) Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India; (vi) Deposit in the Post Office Saving Bank; (vii) Deposit in the National Savings Certificates; (viii) Twelve years National Defence Certificates; (ix) Ten years Defence Deposits; (x) National Defence Bonds and (xi) Unit Trust Certificates at 5% below market value or at the face value whichever is less. (xii) Insurance surety bonds as per Annexure XVII of GCC-2022. Also, FDR in favour of FA & CAO (free from any encumbrance) may be accepted.
The following deduction will be done on the time of passing bill for payment: - 1 . 2% Income Tax on the total cost of the contract. 2. TDS: -1% CGST & 1% SGST or 2% IGST whichever applicable. Moreover, any other charges will be deducted from contractor's bill as per Railway board latest guidelines.
General Electrification work in connection with Replacement of old dilapated steel over head tank by RCC over head tank with repair/improvement of distribution pipe lines at Gursahaiganj, Kaimganj, Kasganj, Gunjdundwara stations, Provision of deep tube well along with RCC over head tank at Farrukhabad, Hathras city & Mathura cantt & RCC over head tank at Mathura cantt near Mathura junction, Provision of 2nd platform with FOB and 04 unit Type -II staff quarters at Ganj Dundwara (GWA) Station, Provision of quarters on replacement base 14 Nos Type- II Qtr. at Sikandra Roa station of Izzatnagar Division and Provision of platform No.2 & COP at Sikandra Roa station.
IZN-Elect-OT-17-2026
IZN-Elect-OT-17-2026
Open
Works - General
12 Months
Gorakhpur, Uttar Pradesh
₹0
₹1.8 L
15 Jul 2026
24 Jun 2026
1 Jul 2026
107 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 92,31,898.84 | ||
| — | — | — | Above/ 627200.00 Below/P | ||
| Supply and testing of , ISI marked motor minimum BEE 3 star rated 20 HP submersible Pump set, of discharge capacity 900-1200 LPM, discharge head 71-81 mtrs, Nos of stage- 05, outlet dia 100 mm, , conforming to IS: 8034 & IS: 9283 latest, suitable for 415 volts (+6 %,-15% volts,), 50 Hz+/-3%Hz, 3 phase A.C supply with delivery size- 100mm diameter with suitable nipple/socket for connecting to 100mm dia column pipe, along with Automatic star-delta starter control panel with inbuilt single phase preventer and automatic water level controller, suitable for 20HP submersible pump. | — | 8.00 | — | — | |
| — | — | — | Above/ 1069670.00 Below/P | ||
| Supply of Column pipe (Rising Main) 100 mm Dia MS column pipe 'C' Class heavy gauge confirming to IS: 1239 with both end threaded & MS Flange welded of 03 meter long each length 02 nos. flange. (Warranty Period : Upto 30 months from the date of supply) | — | 490.00 | — | — | |
| — | — | — | Above/ 239980.00 Below/P | ||
| Supply and testing of BEE 3 star rated , 15.0 HP(11 kilowatt) capacity submersible pump-set, suitable for 415 volts(+-6%-15%), 50 Hz, 3 phase AC supply, minimum discharge capacity (LPS)-3.33 liter/second, Minimum 50 Mtrs discharge head, delivery size- 80mm diameter/100mm with suitable nipple for connecting to 80mm dia column pipe, along with Automatic star-delta starter control panel with inbuilt single phase preventer and automatic water level controller, suitable for 15HP submersible pump. | — | 4.00 | — | — | |
| — | — | — | Above/ 423856.00 Below/P | ||
| Supply and testing of BEE 3 star rated , 12.5 HP(9.3 kilowatt) capacity submersible pump-set, suitable for 415 volts(+-6%-15%), 50 Hz, 3 phase AC supply, minimum discharge capacity (LPS)-3.33 liter/second, Minimum 70 Mtrs discharge head, delivery size- 80mm diameter/100mm dia with suitable nipple for connecting to 80mm dia column pipe, along with Automatic star-delta starter control panel with inbuilt single phase preventer and automatic water level controller, suitable for 12.5HP submersible pump. | — | 8.00 | — | — | |
| — | — | — | Above/ 1270801.00 Below/P | ||
| Supply of Column Pipe (Rising Mains) 75/80mm dia MS Pipe 'C' Class Heavy Gauge Conforming to IS:1239 with Both End Threaded & MS Flange Welded of 3 Mtrs Long Each Length With 02 nos. Flange. (Warranty Period : Upto 30 months from the date of supply) | — | 850.00 | — | — | |
| — | — | — | Above/ 853000.00 Below/P | ||
| Supply of 3 core 16 Sq.mm flat cables with PVC insulation and sheathed with multistrand flexible Copper Conductor FOR Submersible Pumps (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C) duly ISI marked to IS:694 latest | — | 2000.00 | — | — | |
| — | — | — | Above/ 350308.75 Below/P | ||
| Lowering, testing and commissioning of coulomb pipe (rising mains) 100/80 mm dia "C" class heavy gauge with both end threaded and M.S. flange welded of 15 metres (03 metres length peaces) and make grove for cable, 02 sets of supporting clamps made by M.S. flat 65 x 8 mm with nuts & bolts for holding rising mains, 01 No. C.I bend of size 100 mm dia with both end flange, 01 No. C.I swing check flange type reflex valve (Non Return Valve) of size 100 mm dia., conforming to IS: 5312/1984 (Part-1/84)-01 No. C.I Sluice valve flange type conforming to IS: 780/1980 of size 100 mm dia complete with hand wheel, 02 length of 20 metres steel wire rope 12 mm for holding submersible pumping set., 01 No. pressure gauge with cock conforming to IS:3624/1987 of suitable size etc as required. | — | 11.00 | — | — | |
| — | — | — | Above/ 420495.00 Below/P | ||
| Digging of trench of all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable with supply and placing of second-class bricks approx 10 bricks per mtrs. & refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench as per IS: 1255/1983. | — | 8500.00 | — | — | |
| — | — | — | Above/ 100625.00 Below/P | ||
| Laying and connecting of XLPE 1100 volts grade (L.T.) cable of suitable size cable in excavated cable trench of above item as per IS:1255/1983 (latest version). Note :- XLPE (L.T.) cable will be supplied by the Railway at site. | — | 17500.00 | — | — | |
| — | — | — | Above/ 207480.00 Below/P | ||
| Design, supply & making of double door feeder pillar box made of 2.0 mm thick cold rolled steel sheet of size 600 mm (L) x 450 mm (W) x 300 mm (D) with provision of water proof, hinged door, suitable locking arrangements, proper hole in the bottom for cable entry (incoming & out going cables 05 No), suitable of MS channel of size 75 mm x 40 mm x 4.8 mm should be fixed across the panel for grouting on the foundation, earthing terminals and panel shall be powder coated (paint) greenish grey shade with TPN copper bus bar 400 Amps - 01 Set, including Supply, fixing, connecting, testing & commissioning of MCCB-100 Amps 04 pole - 01 No & MCB SP&N 32 Amps - 02 Nos in the feeder pillar box. Providing and making foundation for double door feeder pillar box (cubical type LT panel) in CC 1:2:4 with stone aggregate of [Size 1220 mm high x 800 mm length and 600 mm width (610 mm under the earth & 610 mm above the earth)] with fine finish to exposed surface, two coats white washing including excavation of foundation, making proper size hole for incoming and outgoing cables. Grouting of holding down bolt in CC (size of bolt 150 mm long 16 mm dia) included fixing of subdistribution box on CC foundation as per direction of Engineer in charge at site. | — | 15.00 | — | — | |
| — | — | — | Above/ 225657.44 Below/P | ||
| Supply, making testing & commissioning of pipe earthing arrangement with GI pipe 'B' class, 40 mm dia 4.50 mtrs, long including accessories & providing masonry enclosure with cover plate of 16 SWG M.S. having locking arrangement watering pipe, salt, charcoal etc. as per Drg. NO. DRM / Elect/IZN /1-89 to achieve earth resistance less than 10 ohms and connecting the equipment with 6 SWG G.I. wire as per site requirement. Earthing shall be done on the basis of code of practice for earthing as per IS: 3043/1987. | — | 164.00 | — | — | |
| — | — | — | Above/ 143070.00 Below/P | ||
| Supply and recessing/fixing of PVC Conduit pipe 25 mm (Medium) conforming to IS 9537/ Part III/1983 (Latest version) with accessories, junction box, etc including making chase, plastering/ clamping etc as per technical specifications | — | 3800.00 | — | — | |
| — | — | — | Above/ 84936.00 Below/P | ||
| Supply and fixing of PVC Conduit pipe 25 mm (Medium) conforming to IS 9537/ Part III/1983 (Latest version) including supply of all accessories i.e., junction box, bend, brass screw, cup washer with suitable size MS clamps etc, complete in all respect as per direction of engineer incharge. | — | 2400.00 | — | — | |
| — | — | — | Above/ 8614.00 Below/P | ||
| Supply and Installation of Ceiling rose 3 plate as per IS No. 371/1999 (Latest Version) including connections, Testing and commissioning as per Tech. Specification. | — | 584.00 | — | — | |
| — | — | — | Above/ 11423.10 Below/P | ||
| Supply and Erection of white finish single mounting cover plate with base frame suitable 12 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. | — | 58.00 | — | — | |
| — | — | — | Above/ 6928.68 Below/P | ||
| Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 12 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. | — | 58.00 | — | — | |
| — | — | — | Above/ 3904.32 Below/P | ||
| Supply and Erection of white finish single mounting cover plate with base frame suitable 08 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. | — | 28.00 | — | — | |
| — | — | — | Above/ 2126.88 Below/P | ||
| Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 08 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. | — | 28.00 | — | — | |
| — | — | — | Above/ 6457.00 Below/P | ||
| Supply and Erection of white finish single mounting cover plate with base frame suitable 3 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. | — | 100.00 | — | — | |
| — | — | — | Above/ 4237.00 Below/P | ||
| Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 3 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. | — | 100.00 | — | — | |
| — | — | — | Above/ 27359.56 Below/P | ||
| Supply, Erection, Testing and Commissioning of Modular Type switch 6/10A (1-way) complete in all respect. | — | 452.00 | — | — | |
| — | — | — | Above/ 10009.00 Below/P | ||
| Supply, Erection, Testing and Commissioning of Modular type Plug socket outlet 2/3 Pin 10A complete in all respect. | — | 100.00 | — | — | |
| — | — | — | Above/ 10127.00 Below/P | ||
| Supply, Erection, Testing and Commissioning of Modular Type switch 16/20A (1-way) complete in all respect. | — | 82.00 | — | — | |
| — | — | — | Above/ 11715.34 Below/P | ||
| Supply, Erection, Testing and Commissioning of Modular type Plug socket outlet 5/3 Pin 20A complete in all respect. | — | 82.00 | — | — | |
| — | — | — | Above/ 1197.84 Below/P | ||
| Supply & Erection of Modular type switch blanking set to fill the blank space white finished mounting cover plate complete in all respect. | — | 168.00 | — | — | |
| — | — | — | Above/ 74400.00 Below/P | ||
| Supply of FRLS PVC insulated multi stranded copper conductor single core 1.5 Sq. mm cable, conforming to IS: 694 (latest version) and drawing in laid (recessed /surface) MS/PVC conduit pipe for wiring of point wiring/circuit wiring/ Earth Wiring as required including connections, testing and commissioning. | — | 6200.00 | — | — | |
| — | — | — | Above/ 183500.00 Below/P | ||
| Supply of FRLS PVC insulated multi stranded copper conductor single core 2.5 Sq. mm cable, conforming to IS: 694 (latest version) and drawing in laid (recessed /surface) MS/PVC conduit pipe for wiring of point wiring/circuit wiring/ Sub mains wiring as required including connections, testing and commissioning. | — | 10000.00 | — | — | |
| — | — | — | Above/ 208606.00 Below/P | ||
| Supply of FRLS PVC insulated multi stranded copper conductor single core 4.0 Sq. mm cable, conforming to IS: 694 (latest version) and drawing in laid (recessed /surface) MS/PVC conduit pipe for wiring of point wiring/circuit wiring/ Sub mains & mains wiring as required including connections, testing and commissioning. | — | 7400.00 | — | — | |
| — | — | — | Above/ 95000.00 Below/P | ||
| Supply of FRLS PVC insulated multi stranded copper conductor single core 6.0 Sq. mm cable, conforming to IS: 694 (latest version) and drawing in laid (recessed /surface) MS/PVC conduit pipe for Sub mains & mains wiring as required including connections, testing and commissioning. | — | 2500.00 | — | — | |
| — | — | — | Above/ 76921.38 Below/P | ||
| Supply Fixing, testing & commissioning of LED tube light fitting 20W/2000 lumen complete, colour temperature 6500K, Lamp shell material- Polycarbonate, Lamp efficiency-100 Lm/W, LED tubelight life of 25000 hours predicted as per TM21 report on data Obtained as per test conducted for 6000 hrs as per LM80, operating voltage range 100-300 volt, Replacement warranty-5 years and including making of hole in the wall by drill machine for fixing for fitting with 2 no. rowal plugs, 02 no. screws and wiring connection with existing ceiling rose. | — | 362.00 | — | — | |
| — | — | — | Above/ 39728.00 Below/P | ||
| Supply, Installation, Testing & commissioning of SPN MCB Distribution board 8 way double door made with 1.2 mm thickness CRCA sheet fully powder coated of 50-70 micron with 01 No. MCB 02 pole 40 Amperes 10 KA 230 V as incoming and 06 Nos MCB of 6-20 Amp single pole 10 KA, 230 volts as outgoing complete in all respect including connection as required. | — | 16.00 | — | — | |
| — | — | — | Above/ 38267.28 Below/P | ||
| Supply, Installation, Testing and Commissioning of SPN MCB Distribution Board 4 Way double door made with 1.2 mm thickness CRCA sheet fully powder coated of 50-70 micron with 01 No. MCB 02 Pole 40 Amp 10 KA 230V as incoming and 02 Nos. MCB of 6-25 Amp single pole 10 KA 230 Volt as outgoing complete in all respect including connection as required. | — | 36.00 | — | — | |
| — | — | — | Above/ 2187.90 Below/P | ||
| Supply, installation, testing and commissioning of modular bell push switch 10 A as per IS:3854/1997 (latest version) | — | 18.00 | — | — | |
| — | — | — | Above/ 1935.54 Below/P | ||
| Supply of Ding Dong door bell and erection on the M.S. Switch box, connection with twin core PVC insulated flexible copper conductor cable of size 14/0.193 mm including testing and commissioning as required. | — | 18.00 | — | — | |
| — | — | — | Above/ 191002.70 Below/P | ||
| Supply, Fixing, connecting, testing & commissioning of Exhaust fan, wall mounting 380 mm sweep as per IS.2312 suitable for 220-230 volts, 50 Hz, AC supply, complete in all respect as per direction of engineer incharge. | — | 58.00 | — | — | |
| — | — | — | Above/ 259912.05 Below/P | ||
| SITC of BLDC Fan with Brush less DC Motor 1400 mm sweep, 35 watt, power factor 0.9, Air delivery 230 Cubic meters per minute, three Nos aluminium blade, blade thickness 1.1 mm, double ball bearing, BEE 5 Star rated, ISI marked, as per IS:374:2019 latest with electronic regulator warranty of ceiling fan 60 Months from supply, and Installation, connection with Twin core PVC insulated flexible copper conductor FRLS cable of size 14/0.193 mm (0.41 Sq. mm) testing and commissioning of 1200/ 1400 mm sweep AC ceiling fan/Air Circulator (on the installed CI/MS Box) including earthing. | — | 111.00 | — | — | |
| — | — | — | Above/ 10357.74 Below/P | ||
| Supply, Erection, Testing and Commissioning of Modular type step type Electronic Fan Regulator complete in all respect. | — | 54.00 | — | — | |
| — | — | — | Above/ 12420.00 Below/P | ||
| Supply of 12 watt/1200 Lumens LED bulb, base 22, 6500 K warranty 5 years, IS: 16102 part-1 and Part-II latest suitable for working on 230 Volts, AC supply, 50Hz. | — | 108.00 | — | — | |
| — | — | — | Above/ 9720.00 Below/P | ||
| Supply & fixing of battaen holder metal ring type complete in all respect. | — | 108.00 | — | — | |
| — | — | — | Above/ 26470.80 Below/P | ||
| Provision of Electronic type Energy Meter single phase, (400%) 05 Amps capacity 02 wire, 240 volts, 50 Hz. A.C. supply. And Supply, Fixing, Testing Commissioning of Energy meter box of size 235mm x 300 mm x 130 mm deep made of 18 SWG M.S sheet with enamel paint as per drawing no L/CEE/GKP/2008/03 and fixing & connecting the energy meter in the box. | — | 18.00 | — | — | |
| — | — | — | Above/ 13923.70 Below/P | ||
| Supply & fixing of single door box inside diamensions size 300 x 200 x 105 (WxHxD), fabricated from 1.6 mm CRCA sheet steel, powder coated, hinged door, gasket, cable gland plate 2 mm thick with five Nos holes provided at bottom, locking arrangement with complete TPN copper busbar fixing with insulator and complete connection of incoming & outgoing cables. | — | 10.00 | — | — | |
| — | — | — | Above/ 33305.30 Below/P | ||
| Supply, Installation, Testing & commissioning of Light timer for 35 minutes time delay relay assembly with the following accessories incoming 3 phase 63 Ampere contactor with NO/NC, PCB circuit plate with required electric component complete wiring & power supply control by 6 A SP MCB in MS Box made by 1.6 mm CRCA sheet with powder coated paint system suitable for 10-12 KW lighting load. | — | 2.00 | — | — | |
| — | — | — | Above/ 27000.00 Below/P | ||
| Supply of Hand Operated Chain Pulley Block as per IS 3832 (Q4), 5 Ton capacity - 5 Mtr, Warranty 1 year, complete. | — | 1.00 | — | — | |
| — | — | — | Above/ 493644.38 Below/P | ||
| Supply, erection and testing of hot dip galvanized tapered octagonal pole of 5.0 Mtrs. long top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimension (L x B x T) 220 mm x 220 mm x 12 mm & foundation bolts size (No. x dia x length) (4 x M16 x 600 mm), anchor plate thickness 3 mm with hot dip galvanized detachable single arm bracket made by 48.3 mm outer dia pipe 300 mm long with 32 mm outer dia sleeve including erection & fixing on the foundation with 2x1.5 mm sq FR PVC insulated unsheathed multi strand flexible copper cable, Bakelight sheet for connecting testing & commissioning of LED fitting complete in all respect. Street light Pole shall be pre fitted with FR Bakelite base sheet with TPN connector and 8 Nos lugs, 1No SP MCB 6 amps Fitted inside connection chamber having neoprene rubber gasket and 50 cm long examination door cover with 02 Nos hinges complete in all respect. (Octagonal pole shall confirm to IS: 2629 or latest.) Including casting of M-15 grade concrete foundation of 350 mm x 350 mm x 1000 mm size and 450 mm long holding down- 4 Nos bolts as per explanatory note. Note: -1. Galvanized thickness of pole should be minimum 65 microns and test report to be submitted by the contractor at the time of supply. | — | 58.00 | — | — | |
| — | — | — | Above/ 225041.75 Below/P | ||
| Supply, erection and testing of hot dip galvanized tapered octagonal pole of 5.0 Mtrs. long top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimension (L x B x T) 220 mm x 220 mm x 12 mm & foundation bolts size (No. x dia x length) (4 x M16 x 600 mm), anchor plate thickness 3 mm with hot dip galvanized detachable double arm bracket made by 48.3 mm outer dia pipe 300 mm long with 32 mm outer dia sleeve including erection & fixing on the foundation with 2x1.5 mm sq FR PVC insulated unsheathed multi strand flexible copper cable, Bakelight sheet for connecting testing & commissioning of LED fitting complete in all respect. Street light Pole shall be pre fitted with FR Bakelite base sheet with TPN connector and 8 Nos lugs, 1No SP MCB 6 amps Fitted inside connection chamber having neoprene rubber gasket and 50 cm long examination door cover with 2 Nos hinges and other side proper bolted complete in all respect. (Octagonal pole shall confirm to IS: 2629 or latest.) Including casting of M-15 grade concrete foundation of 350 mm x 350 mm x 1000 mm size and 570 mm long holding down- 4 Nos bolts as per explanatory note. Note:-1. Galvanized thickness of pole should be minimum 65 microns and test report to be submitted by the contractor at the time of supply. | — | 25.00 | — | — | |
| — | — | — | Above/ 102706.92 Below/P | ||
| Supply installation, testing & commissioning of Led Luminaire street light, Power 90 Watt, Rated voltage 240 V AC 50 Hz LED luminaire as per IS:10322/Part 5/Section 3/2012 latest, IS: 16107 (Part 2/Sec 1):2012 latest, and LED module as per IS: 16103(Part-2)/2012 - Type-3 latest, IP- 66 as per IS:10322 (Part 1):1982 latest. | — | 108.00 | — | — | |
| — | — | — | Above/ 214638.00 Below/P | ||
| All work pertaining to Horizontal Directional Drilling (HDD)/Boring and trench less cabling. It includes supply, transportation and insertion of self lubricated HDPE pipe and laying of cable in boring under the track/road by using different sizes of pipes depending on total number of cables will be crossed. The depth of horizontal boring should be minimum 3.0 Mtrs from rail flange/road level. This item will be used for track crossing of running lines. a). By using self- lubricated HDPE pipe of minimum 107.40 mm inner dia and 125 mm outer dia in the bore and the laying of cables in the bore under the track/road.(HDPE Pipe shall be supplied by contractor). | — | 200.00 | — | — | |
| — | — | — | Above/ 186516.00 Below/P | ||
| Design, Fabrication, supply, Fixing and Connecting of LT Distribution box made of 1.6 mm. thick cold rolled steel sheet of size 600 mm (L) x 450 mm (W) x 300 mm (D) with provision of double hinged door feeder pillar box (Cubical type) suitable locking arrangements, proper hole in the bottom for cable entry (incoming & out going cables) with cable gland of suitable size 04 No, MS channel of size 75 mm x 40 mm x 4 mm should be fixed across the panel for grouting on the foundation, size 1220 mm high X 800mm length and 600mm width, (610 mm under the earth & 610 mm above the earth) earthing terminals and panel shall be powder coated (paint) greenish grey shade with supply and fixing of TPN copper bus bar 600 Amps of size 40 mm x10 mm- 01 Set with provision of water proofing and installation on Providing and making foundation to the above feeder pillar box (cubical type) in CC 1:2:4 with stone aggregate of size (1220 mm high x 800 mm length and 600 mm width) with fine finish to expose surface, to coats white wishing including excavation of foundation, making proper size hole for incoming and outgoing cables. Grouting of holding down bolt in CC (size of bolt 150 mm long 16mm dia) as per direction of engineer in charge at site. | — | 15.00 | — | — | |
| — | — | — | Above/ 50582.30 Below/P | ||
| SITC of VTPN distribution board 4 way as per IEC 61439-3, suitable for flush mounting and surface mounting, 100 Amps copper bus bar for each phase with two neutral bar, two earth bar and cable ties for cable management, fully insulated bus bar & shrouded Neutral bars, Improved Pan assembly for ease of installation, refitted masking sheet, with provision for TPN MCB as incomer and SP MCB's outgoing, IP 43 with metal door with fixing & connecting. Along with 01 No.- MCCB's 4 pole 100 Amps, Breaking capacity 25 KA, rated voltage 415V 50 Hz AC supply conforming to IS: 13947 (Pt.1&2)/IEC60947- 1&2-03 No.- MCB 'C' curve, no. of poles - two pole, rated voltage 415 V AC, rated current Amps: 63 Amps, rated short circuit current capacity 10 KA rated frequency: 50 Hz, AC conforming to IS:60898-1/2002. 10 No.- Single pole MCB 16 Amps, 'C' curve, 10 KA, ISI marked conforming to IS/IEC 60898-1-2002. | — | 2.00 | — | — | |
| — | — | — | Above/ 24219.00 Below/P | ||
| Dismantaling of existing erected MS tubular pole/ Rail pole including removing of cross arm bracket with insulator, overhead conductor as per direction of Engineer in charge at site. (1 span=1 job) Note: Dismantled MS tubular/Rail pole & other related material (cross arm bracket with insulator, overhead conductor etc.) to be handed over to the concerned engineer incharge at site. | — | 36.00 | — | — | |
| — | — | — | Above/ 92701.00 Below/P | ||
| Cutting of platform/road for cable trench upto depth of 750 mm and 350 mm wide for laying of cable and making good the same including supply of extra quantities of material ie aggregate, mooram, searching, red bajri, bitumen compaction, protection during work etc. and labour complete and laying of cable in excavated cable trench over 50 mm thick sand cushion and cover with second-class bricks (approx 10 bricks per mtrs.) including supply of bricks, all taxes labour etc. as per direction of Engineer incharge at site. | — | 850.00 | — | — | |
| — | — | — | Above/ 211783.19 Below/P | ||
| Design, Supply ,installing ,testing & commissioning of LT distribution panel with copper bus-bar 100A, consisting with the following accessories : (i) Panel board of MS sheet 1.6 mm thick, re-inforcement with 2.5mm thick members and chanel arranging rakes and shelves of suitable size (ii) Incomer :MCCB 100A ,4 Pole ,10KA-01 No, Changeover switch 100Amp.4 pole - 01Nos , Multifunction Meter-1 set, Indication lamp R,Y,B (LED) (iii) Outgoing: 63A 4 pole MCCB -02Nos , 32A 4 pole MCCB-05Nos, 32A 2 pole MCB -03Nos, 20A 2 pole MCB -03Nos Indication lamp R,Y,B (LED). MCCB of rated current >100A will be 70-100% adjustable setting and 25kA breaking current capacity and 10KA for lesser rated current. LT Panel shall be anufactured in Confirming to IS-60947 and IS/IEC 61439 Part-1, Part-2, Part-3 complete in all respect. | — | 1.00 | — | — | |
| — | — | — | Above/ 204229.00 Below/P | ||
| Design, Supply, installing,testing & commissioning of LT panel board with copper bus- bar 250 A, consisting with the following accessories :- (i) Panel board of MS sheet 1.6mm thick, re- infrocement with 2.5mm thick frame and chanel arranging rakes and shelves of suitable size(ii) Incomer : 250A 4 pole MCCB, 25 KA -01 No.,Multifunction Meter-1 Set,Indication lamp R,Y,B (LED) (iii) Outgoing:-125A 4 pole MCCB -03 Nos, 63A 4 pole MCCB -02 Nos. Indication lamp R,Y,B (LED) Breaking capcity 25KA for rated current >100A and 10KA for lesser rated current. LT Panel shall be manufactured in Confirming to IS- IS-60947 and IS/IEC 61439 Part-1, Part-2, Part- 3 complete in all respect Note; all MCCB capacity having 63 amp capacity will be of 70-100 % load setting (for Colony). | — | 1.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderdocumentOT172026MRTPump_compressed_1.pdf
ATTACHMENT
HQJPO_Digginginthevicinityofcable_20.05.24_compressed.pdf HQ JPO
ATTACHMENT
GCCApril2022correctionslip1to11.pdf
ATTACHMENT
GCCApril2022.pdf
ATTACHMENT
HQJPO_Digginginthevicinityofcable_20.05.24_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .