REPAIR MAINT IN ATTENDING DAY TO DAY COMPLAINTS PETTY REPAIRS REPLACEMENT OF FLOAT VALVES ARRESTING LEAKAGES IN WATER SUPPLY DISTRIBUTION SYSTEM OF OTM AND MD ACCN UNDER GE MIS MHOW

Amount

M&L for rectification of leakages to water supply distribution lines 15 mm to 25 mm dia GI tubing by carrying out necessary earth work excavation in any type of soil , returning / filling, removing and dewatering as required ,tightening of loose joints including provision of GI fittings like union, sockets , nipple, elbow etc. as required , threading where required compete all as specified and as directed.

All as per Item No 01 above but for GI tubing of size 40 mm to 50 mm dia bore.

All as per Item No 01 above but for GI tubing of size 80 mm to 100 mm dia bore.

Note for item No 01 to 03: 1. The quoted rate shall be inclusive of earth work eacavation in any type of soil . 2. The quoted rate shall be inclusive of necessary GI fittings and flanges, Sockets,clamps etc. as required and nothing extra shall be paid to the contractor on this account. 3. GI Pipe of lenght above 01 Meter for rectification of complaints shall be measured and paid seperately under the relevant items .

M&L for attending routine complaints of external water supply like 'No water', Over flowing of service tanks etc. including rectification of minor defects by taking down of existing GI tubing upto 25 mm dia, cutting/ threading and making joints where necessary, cleaning for blockage, opening of float valve of service tanks cleaning and repairing and refixing the same or replace the same where necessary, replacement of jumper valve / packing sheet of gate valves or replace the unserviceable gate or Globe valves and replacement of unserviceable GI fittings where required complete all as specified and as directed

All as per Item No 04 above but for GI tubing of size 40 mm to 50 mm dia bore.

Note for item No 04&05:- 1. Daily complaints shall be collected/received from the Water Supply Complaint cell of AGE E/M No-1, Filtration plant etc by the contractor and requried Nos of tradesmen shall be detailed immediately to resolve the complaint . 2. Stationery required such as complaint book, Job card etc. shall be provided by the contractor and quoted rate shall be inclusive of the same. 3. T&P including Ladder (wooden/Steel/Aluminium of required size) required for attending the above complaints shall be arranged by the contractor. 4. The complaints shall be attended and completed within 12 hours of the registration of the complaints including Sundays and Holidays. 5. The quoted rate shall be inclusive of earth work excavation in any type of soil if any . 7. The quoted rate shall be inclusive of GI fittings and flanges, sockets,clamps etc.as required . 8. Gate valves and Float valve of appropriate sizes as required shall be measured and paid seperately under the relevent items .

M&L for attending breakdown of water supply pipe line and repairs to CI water mains of size 80 mm to 200 mm dia including neceassary earth work excavation in any type of soil by using necessary tools and plants such as JCB etc. or equivalent manpower ,by dewatering from the trenches by using motar/pumps etc. rectification of leakages if any, rectify the same by cocking of lead wool, or replacement of run lead joints or replacement of CI Specials or broken pipes etc.

All as per item No 06 above but for CI water mains of sizes 250 mm to 400 mm dia

Note for Item No 06 & 07:- (a) The CI Specials, Lead joints, cutting of CI pipes etc. shall be measured and paid seperately under respective items of BOQ/Schdule 'A' (b) The quoted rate shall inclusive of necessary earth work excavation in any type of soil and making good the damaged road surface as per existing and nothing extra shall be paid and admissible (c) Complaints shall be attended and completed immeditely within 12 hours of initiation by Department by deploying requried Tradesman, tools and plant, materials as requried at site

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation, laying pipe etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in any type of soil complete all as specified

Returning filling in any type of soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified

Removing excavated material (Soil) to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified

Taking up or down existing GI tubing and connections including cleaning for refixing or removal to store for following size of pipes complete all as specified

100 mm bore

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Taking up cast iron water main from trenches carefully without any damage (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed for the following sizes:-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

Supplying, fixing, laying & jointing in repair galvanised iron water tubes 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed of following sizes: -

100 mm bore

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Supply, fixing, jointing and testing in repair of cast iron pipe with spigot and socket ends suitable for run lead joints centrifugally cast class LA in any length laid in trenches complete all as specified and directed of the following sizes :-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collars, caps and plug upto 150 mm bore for spigot and socket end pipes complete all as specified

M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collars, caps and plug etc from size 200 mm bore to 300 mm bore for spigot and socket end pipes complete all as specified

M&L for cutting existing road of width not exceeding 750 mm and n.exc 1.0 m deep for laying of water mains and filling back with excavated soil except road portion and road portion shall be make good with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified

M & L for servicing of sluice valve cast iron body/ Butterfly Valve by greasing/ oiling using necessary tools and plants as required as per Manufacture instructions & providing glands rope of superior quality and rubber gaskets/packing where necessary to stop any leakage of sluice valve of size 80 mm dia to 200 mm dia all as specified

All as per item No 19.00 above but for bore size 250 mm to 400 mm dia complete all as specified and directed

S&F in repair brass check nut as per existing size including opening head portion of the valve and refixing the same complete suitable for CI Sluice Valve of following sizes :

80 mm to 200 mm dia

250 mm to 400 mm dia

M&L for cutting existing CI pipes, laid in position for taking out branch connection by inserting new Tee, branches, collar etc. complete all as specified and directed for the following sizes:-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

M&L for burning out lead joint and taking out spun yarn carefully for the following sizes of pipes :-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

M&L for run lead Joint for cast iron pipes spigot and socket ends and cast iron special fitting with caulked spun yarn and lead for following size:-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

Supply only 40 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified and as directed (minimum weight : 690 gm)

Supply only 25 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified and as directed (minimum weight : 455 gm).

Supply only 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified and as directed (minimum weight : 690 gm).

Supply 15 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball for iron pipe all as specified and as directed (minimum weight : 455 gm).

Supply only gun metal gate valve with iron wheel head, screwed both ends for iron pipe of following size

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

MODI CORPORATION

Ankit construction

Sameer Auto Engineers

Vinayak Trading House

NIDHI CONSTRUCTION