Beautification and Developm...

Amount

NS Item

Leg press (BOTH SIDE) 90 x20x75 inches Equipment made to meet EN 16630 ,Epoxy coating of 100 microns GI main post-of:114 mm Dia Pipe thk. - 3.5 - 7.5mm Self-lubricating German bearing and Reinforced foot pedals for extended life Non fading LLDPE and open ends of the pipe closed by GULLDPE caps High tensile steel with galvanized nut bolts are used for assembly. Self Explanatory stainless steel label fixed on equipment for ease of use.

SIT UP BOARD DOUBLE DIMENSIONS: - 1.76M (L) x 1.14M (W) x 0.66M (H). he Sit up Board double made from “B” Class GI pipe. Center column made from 100mm T NB “B” class G.I. Pipe. The main frame is of 25mm NB made from “B” Class GI pipe. FRP sheet of 3mm thickness is molded on main frame.The remaining frame of the sit up board is of 32mm NB made from “B” class GI pipe. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. The oundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” f class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness

SEATING and STANDING TWISTER DIMENSIONS: - 1.7M (L) x 0.54M (W) x 1.25M (H) Seating and Standing Twister equipment made from “B” Class G.I. pipe 100mm NB made from “B” Class G.I. Round Pipe. The M.S. round plate of Ø250 mm and 10mm thickness is welded at bottom Handle sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. The bottom frame of the Seating and Standing twister is of 32 NB, 50 NB, and 25 NB made from “B” class G.I. pipe. The handle frame of Seating and Standing twister is 25 NB and Foot resting frame of seating side is made from “B” class G.I. pipe of 25mm NB. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class, Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness

AIR WALKER DIMENSIONS: - 1.72M (L) x 0.63M (W) x 1.75M(H) Sky Walker Equipment made from “B” class G.I. Pipe of different NB. 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The cerclips used for assembly are of A24 type. The powder coating is done with Pure Polyester powder of The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness

Supply, Installation and Commissioning of RGB Led light 54Watt IP 68 standard made up of heat resistant, SS 304 body, provided with a provision of complete as per standard specification in all respect up to entire statisfaction of Engineer In Charge.

The decorative poles are made of Durable Mild Steel with a total height of 3 mtr above ground level. The pole bottom section of 114mm dia x 3.2mm thickness x 1000mm long and top section of 76mm dia x 3mm thickness x 3000mm long. The Decorative base plate dimension Ø247mm as per drawing. All pole section Shall be welded by certified welders using high and MIG welding process. The Service door shall be provided at bottom part of the pole to accommodate a built-in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole is design with elongated foundation holes for fine alignment of the pole during installation. Nano Ceramic surface conversion, resistant to corrosive environment. Pole primarily coated with primer than epoxy resin and top coated with UV stabilized MRF PU PAINT or Powder coated and cured. Shell pole install with LED post top light in 30W with specified design of circles which gives soft homogenous light distribution for landscape area. The post part has dia 450mm and 850 mm long with a mounting spigot. The optical system has been carefully engineered to provide correct illumination and enhanced security. Fitting is of total height 3.5mtr with Decorative pole as per attached drawing. Post top is completely weather protected and suitable for outdoor lighting application. Light is wired with Branded OSRAM or equivalent make LED and constant current driver. Proper thermal management for longer life of fixture. Color tolerance 3 SCDM to avoid color deviation. All the LED to be tested LM80 test method. Light output of source is more than 110lm/ watt, CRI)80, Surge protection 3 k, operating voltage 140-270V. Led burning of 50,000 hours. Fitting is IP66 complete in all aspects with all accessories except foundation bolt.

Supply, installation, testing and commissioning 3 Meter dia Fountain complete in all respect up to statisfaction of Engineer In charge. Civil Work, 6 Set Flower`s jet effect, Centre hollow jet, 4 Revolving jets, 3 and` dia ring jets 1 sunburst effect jet, 12 1` size stainless steel solenoid valve, 6 2` stainless steel solenoid valve, water pipe fittings, Submersible pump 3HP 3 phase, Electrical work etc.

Providing and fixing with all nessery items including prepration of foundation Multi Play Station Age Group- 6 To 12 Years. Safety Play Area - 25*15 FT, Spiral Slide, Standard Slide, Double Deeker Slide, FRP Turnal Bridge, FRP Parafit= 2*2, FRP 2 Canopy, Pipe= 75 MM, 25 MM, 14 Guage Apolo Pipe ISI Mark. Paint= To Coat Colour Aspa Paint. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Providing and fixing with all nessery items including prepration of foundation four seated MGR Age Group- 6 To 12 Years. Safety Play Area - 6 * 6 ft, H=4 FT, FRP SIT= 60 MM,25 MM, 32 MM. Bearing= 130 MM 2 Bearing. 14 GUAGE APOLO PIPE ISI MARK. Paint= To Coat Colour Aspa Paint. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Supply and fixing of Straight Slide Slider should be made of HDPE (Pipe) of ID 40 and OD 50 with nylon bush (mat finish) of demanded colour. With structural parts GI pipes and MS steel (including cutting, fitting, welding, Bolting and smooth grinding etc. complete. All the structural parts shall be polyester powder coated having min. thickness of 50 micron. High quality fastened complete with supply/fixing and installation to ground including civil work for making base and pedestals. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Supply and fixing of See-Saw, safe play area=1.0 to 1.5m*3.0 to 3.6m sitting area should be coated with polyester fibre glass reinforced plastic of 6 to 8 mm thickness. For structural parts GI Pipes and MS Steel (including cutting, fitting, welding, bolting, bearing and smooth grinding etc. ) complete. All the structural parts shall be polyester powder coated having min. Thickness of 50 micron. The structural parts should not to be painted, For structural parts stainless steel should be used. Nowhere Iron to be used Entire product is assembled with nut bolts, flanges and couplings. High quality fastened complete with supply/fixing and installed to be ground including civil work for making base and pedestals. All complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Providing and fixing ground level Duck Spring Rider with all necessary items including preparation of foundation, Age Group- 6 To 12 Years. Safety Play Area - 2 * 3 ft, H=2 FT, FRP Duck, Spring, Pipe= 75 MM, 60 MM AND 50 MM, 14 gauge apolio Pipe ISI Mark. Two Coat Colour Aspa Paint. All complete as per direction and approval of Engineer-inCharge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Providing and fixing with all nessery items including prepration of foundation two seated swing Age Group- 6 To 12 Years. Safety Play Area - 10*8 ft, Chain= GI Rubber Coat Chain Belt, Padestal Bearing, Pipe=60 MM, 14 Guage Apolo CR Pipe ISI Mark. Paint= To Coat Colour Aspa Paint. All complete as per direction and approval of Engineer-inCharge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Supply and fixing of Ashok Stambh made with Sand Stone/ Gwalior stone of 2` dia and 3` height complete in all respect up to statisfaction of Engineer In charge

Bidder Name

Amount

The Siwani Sadhbhawna Co op LC Society Ltd (GSTN-NA) BID ID -1110223

Kamal Singh Contractor (GSTN-NA) BID ID -1111253

Kamal Singh Contractor (BID ID -1111253)

Kamal Singh Contractor (BID ID -1111253)