S/R to Dist court building and session court such as providing patch painting and other repair works for the programme of VVIP at BAm

DISMANTLING brick or stone masnory in lime or stone mortar under 3m height and removing the debris within 50m lead including stacking the useful materials for reuse with cost of all labour and TandP required for the work etc. complete(excluding GST)

CEMENT CONCRETE (1:2:4) in FandF using 12mm (1/2inch) size crusher broken hard black granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks with cost conveyance cess and royalties of all materials and labour with TandP required for the work etc. complete in all respect in all floors.(excluding GST)

Earthwork in excavation in foundation in all kinds of soil including hard moorum, stony earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from worksite with all leads and lifts including cost of all labour and TandP cess and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.(excluding GST)

Filling in foundation and plinth with SAND well watered and rammed in 23.5 (9inch) thick layers with all leads and lifts with cost conveyance, cess and royalities of materials and labour with TandP with cost, conveyance for the work etc. complete as directed by the engineer in charge (measurement will be taken on finished compacted section only) (Excluding GST).

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3.2inch) size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6inch) thick to the required level ramming watering and curing etc. complete including cost conveyance and royalties of all materials and labour with TandP required for the work etc. complete including dewatering if required.(excluding GST)

FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in FandP using clamp burnt bricks of 9inch size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with TandP required for the work etc. complete in all respect in all floors.(excluding GST)

FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Superstructure using clamp burnt bricks of 9inch size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with TandP required for the work etc. complete in all respect in all floors.(excluding GST)

12 mm (1/2inch) thick cement plaster (1:6) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with TandP required for the work etc. complete. (excluding GST)

16 mm (5/8inch) thick cement plaster (1:6) finished smooth to inside surface of 9inch thick brick walls/stone masonry after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with TandP required for the work etc. complete. (excluding GST)

R.C.C. work (1:1.5:3) M-20 having minimum compressive strength in work test of 200kg/square meter in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and 516 using 12mm to 20mm size (20mm not to exceed 25%) hard black broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete, watering and curing for 4 weeks centring, shuttering and finishing the exposed surfaces smooth providing grooves to beads where necessary, providing drip cess and proper randy the joint with wall surface where necessary and providing fan hooks as per requirement and ceiling smooth to receive white washing or painting including cost, conveyance, royalties, of all materials and labour with TandP required for the work etc .complete in all respect but excluding cost of binding wire of 18 to 20 gauge and labour charges for straightening cutting bending binding and laying the grills and placing in proper position etc. complete as per specification and direction of the Engineer-in-charge. (excluding GST) PLINTH BEND

COLUMN

LINTEL

Straightening bent up or coiled HYSD rods, cutting bending cranking hooking welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding tying the grills, hoisting, lowering and placing in proper position as required for RCC works with cost conveyance of m. s. rods or tor steel and binding wires of 18 to 20 gauge and labour with TandP required for the work etc. complete in all floors (weight of binding wires will not be made on weight of m. s. rods or tor steel only).(excluding GST)

Supplying fitting and fixing of MS Grill windows made out of flat square flat to the required size and specification of approved design and directed by the engineer in charge including cost conveyance labour and TandP required for the work etc complete Excluding GST

Providing and fixing plain GYPSUM BOARD CEILING suspended from roof by adjustable g.i. ceiling angle with spread at a distance not more than 600mm fixed a rope by rowel plug and stiff cleat, gypsum board 12.5mm thick held by g.i. perimeter channel MF-3 and intermediate channel MF-7 framing boarding jointing and finishing with special type of gypsum compound etc. complete including cost conveyance of materials and labour with TandP required for the work etc. complete as per the direction of the Engineer -in-charge (excluding GST) GROUND FLOOR

FIRST FLOOR

Fixing of vitrified tile (PLAIN IVORY) of premium grade having thickness of 8mm to 10mm confirming to IS 13756 of 60cm x 60cm size in floors, trades and landing and landing on 25mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with TandP required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) GROUND FLOOR

2nd floor

Supplying fitting and fixing of vitrified tile (PLAIN IVORY) of premium grade having thickness of 8mm to 10mm confirming to IS 13756 of 60cm x 60cm size in dado and walls and landing on 25mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with TandP required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) GROUND FLOOR

2nd floor

Supplying fitting and fixing of vitrified industrial tiles in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with TandP required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST)

Wall painting two coat with WEATHER COAT of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost conveyance cess and royalties of all materials and labour with TandP required for the work etc. complete in all respect in all floors. (excluding GST) GROUND FLOOR

first floor

Painting two coat with any approved paint to old WOOD work and iron work including sand papering to polishing the surface smooth with cost conveyance cess and royalties of all materials and labour with TandP required for the work etc. complete in all respect in all floors.(excluding GST)

Wall painting two coat with PLASTIC EMULSION PAINT of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with TandP required for the work etc. complete in all respect in all floors. (excluding GST) GROUND FLOOR

FIRST FLOOR

Finishing wall surface of walls with acrylic WALL PUTTY (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost conveyance cess and royalties of all materials and labour with TandP required for the work etc. complete in all respect in all floors. (excluding GST)

Please Enable Macros to View BoQ information