PROVN OF HIGH MAST LIGHT AT SPORTS COMPLEX AND EXHAUST FAN IN KITCHEN AT NCO MD ACCN AND CERTAIN RW AND MINOR WORKS AT NDA KHADAKWASLA

Amount

Supply, Fixing and Installation of 20/21mtr Octagonal hot dip galvanised highmast and suitable for wind velocity as per IS 875. It shall also include accessories'for high mast including head frame, steel wire rope 6 mm dia 97/19 guage trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 8 luminaires 'symmetrically. The mast shall have an integral powertool installed inside the base compartment for its operation.foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates incl luminaire mounting arm, pully assembly, twin dome aviation /obstruction light lightning arrester spike including Excavation(any type of soil strata), RCC foundation as per height as recommended by the manufacturer , Errection of the highmast with the help of suitable tools and plants, wiring of luminaries with all wiring materials like PVC insulated, Sheathed copper conductor cable of suitable size & cores incl cables lugs /thimbles complete all as specified and directed by Engr-in-Charge.Make; Philips/Valmont/Bajaj or approved makes

Supply & fix 400 Watt Jeta valour LED fitting complet with control gear box including all necessary arrangement suitable for 16 mtr high mast light complete all as specified and directed by Engr-in-Charge.Make: Havells Cat No JETAVALOURFLS400WLED757MODASYMLTG and Control gear box: LEDDRIVERASSEMCGBOXVALOUR200WP(02 Nos) or Wipro/Philips/Luker

Supply & laying UG Cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sq mm 4 core complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, n.exc 1.5m wide and n. exc 1.5 m depth and getting out in for foundation of pole, stay, laying of cable and pipe etc all specified :- Soft/loose soil

Returning and filling in, including spreading and well ramming in layers n exc 25 cm all as specified and directed.

Removing excavated material a distance n. exc 50 m & depositing where directed at a level n. exc 1.5 m above the starting point.

M&L for laying of half round reinforced concrete pipe, of dia 150 mm, half round for bottom and half round for top and before laying excaved area shall be leveled. complete all specified and directed. Note : 01 Half round top and 01 half round bottom together will be considered as one running meter. Make as per sample given by Engr-In-Charge

M&L for road /hardstanding cutting suitable for 50 MM GI pipe and insert the pipe size of 50 mm dia pipe in road crossing of surface wherever required and making good to match with existing surface as per site requirement. Note: 1.Quoted rate shall deemed to incl the cost of making good the disturbed surface and match with existing (Chequerd tiles/Road/PCC). 2. Quoted rate excludindg of 50 MM GI pipe to be measured under relevant items of Sch 'A'

M&L for GI pipe Medium grade of size 50 mm dia fix to wall/pole/laid in tranches/raod and pluging both end etc with all necessories arrangement complete all as directed by Engr-in-Charge.

Supply and install ,testing and commissioning of factory made outdoor hut roof type size of 50x30x60 CM , CPRI approved, weather proof LT Panel made out of MS angle iron size 40x40x6mm & MS CRCA sheet of 3.15 mm thick with double door including locking arrangements Kiosk type with base frame grouted in ground including necessary earthwork,The panels shall be provided RYB LED Indicators with control wiring 01 Set. PCC all arround the penal upto 0.3 mtrs etc. and fixing arrangements powder coated including bus bar chamber with insulated, copper bus bar of rating 100 Amps including switch gear for high mast light incl all joints and connection shall be done with galvanised or cadmium plated screws/bolts , suitable lugs and as follows :- INCOMING a) MCCB 63 Amps 4 pole 415 Volts 50Hz rupturing capacity 25 KA with adjustable setting - 1Nos for Incoming b) RYB indicator lamp LED type (Set of three) - 1 Set OUT GOING a) MCCB 3 Pole 63 Amps 415 V, 25 KA - 01 No b) Digital Time switch with Power contactor 50 Amps 3 pole 415 volts.- 01 Set c) Control relays (Auxiliary Contactors)

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25mtr deep below ground level with top edge of the earth plate not less than 1.5mtr deep below normal ground level, connected with & including galvanised iron strip 25x4 mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 15 mm dia (medium grade) including concrete pit in PCC (1:3:6) type C-1, RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mess including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil complete all as specified and as directed and testing on completion.

M&L point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly for following :- One light /fan point controlled by one switch one way

Ditto all as per item No 12 above but one light/fan point controlled by one way switch 6 Amps 240 volts

Ditto all as per item No 12 above but one 3 pin socket outlet, 5 Ampd, independent board

M&L switch piano Conform IS 4615-1968 flush type 5 Amps single pole one way.

S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm.

M&L for exhaust fan of sweep 225/230 mm,single phase 240V of not less than 3 star BEE star rating , louvers and making hole by core cutting as per the required size of the exhuast fan and making good the disturbed surfaces and fixing to the wall with proper fasetner arrangements and all accessories.

S& F 25 watt LED post top lantern made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 complete all as specified Make Havells/Philips/CG/Wipro/Luker.

S & F 12W WH LED Out door Garden light , post top with diecast aluminium body dark grey incl surge protection up to 2 KV confirm to IP-65 , incl suitable fixing arrangements as per site requirement complete all as directed by Engr-in-Charge Make - Luker Model No LODBR12 or Equivalent in /Crompton Greaves/Philips/Wipro/Havells.

S & F 3 Core 6 sqmm XLPE aluminium counductor cables and including 25 mm dia heavy duty PVC conduit to be laid underground complete all as specified and directed.

S & F of PVC sheathed 3 core 1.5 sqmm copper conductor for bollard/post top lantern connection

M&L for PCC (1:3:6) type C-1 (40 mm graded aggregate) Cement concrete in foundations, filling and mass concrete for bollard lights

M&L for PCC 1:2:4 (40 mm graded aggregate) Cement concrete coping of bollard lights

M&L for road /hardstanding cutting of surface wherever required and making good to match with existing surface as per site requirement.

Supply and fix busbar panel factory made , made out of 3.15 mm thick CRCA sheet, powder coated with hinges and door with locking arrangements of size 35cm x 25cm x 45 cm housing in and including 25 x 4 mm bus bar of 04 nos suitable length fixed on porcelain insulator with proper size of screw and one No of MCB TPN 40 Amps, 240 Volts , in/out cable gland of suitable size of cables. The panel shall be provided with 04 Nos 25mmx25mmx3mm thick angle iron supports of not less than each .9 mtr height duly painted with anti corrosive black paint complete all as specifed and directed. all as specifed and directed.

Suply & fixing of of 200 watt LED flood light luminaire made in pressure die cast housing and heat sink in aluminium extrusion and IP 65/66 incl suitable structure using by MS channel of size 45x45mm x 5mm,each thick FE 410W (Gde-E-250) quality-A for mounting of 2 Nos flood lights, including drilling, fixing sutaible size of nut, bolts washers complete all as specified and directed by Engr-in-Charge. Note: Quoted rate shall be deemed including the cost of MS channel structure. Make: Havells/Wipro/Philips/Luker.

Supply, transport, errecting and fixing steel tubular swaged welded pole of over all height 8.5 m long complete type 410-SP-22 with cast iron base plate, finial tapper plug cap, bolt, nut and washer etc., complete all as specified and directed by Engr-in-charge. Note (i) Excavation, earth work and PCC work for embedding pole shall be deemed including the quoted rate (ii) Pole upto 1.5 m top of coping shall be painted with 2 coats of black and white strips alternate 30cm each over one coat of red oxide primer. (iii) Steel tubular pole above 1.5 m shall be painted with 2 coats of aluminium paint over a coat of red oxide primer

M&L for laying XLPE underground cable 10 sqmm 4 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade

Supply and fix 40 mm Gi pipe Tubes light grade glavanised, with all fittings , laid in trenches or fixing on pole complete all as specified and directed

S & F junction box (weather proof) of size 295x195x100mm for street light poles with connector for connecting incoming and outgoing cables including 01 No MCB DP 10 Amp to control the pole light circuit and MS brackets made out of 32 x 4 mm, FI clamps with suitable nut, bolts and washers including suitable size of double compression cable glands for incoming and outgoing cables. Make: Sintex, Model No GSJB3020 or equivalent Model of Finolex/Hensel.

S & F PVC insulated copper conductor 3 core 2.5 sqmm for Flood light from sintex box to Flood light, multistranded complete all as specified and directed. Make Polycab/Havells

S & F junction box of 250 mm x 200 mm x 105 mm size with connector for connecting incomming and outgoing of cables including 01 No MCB DP 10 Amp to control the pole light circuit and MS brackets for fixing the box on post complete with nuts, bolts and washers and suitable size of double compression cable glands for incoming and outgoing cables. Make: Sintex, Model No GSJB2520 complete all as specified and directed by Engineer-in-charge

Cutting foot road/foot path using suitable T & P tools for a width not exeeding 200 mm and depth 200 mm for laying of XLPE cable including inserting 32 mm light grade GI pipe refiling and making good with farmac/PCC duly matching with the sorroundings complete all as directed.

S&F 200 watt warm white (3000K) LED flood light luminaire die cast housing and heat sink in aluminium extrusion and IP 66 on existing flood light mounting structure complete all as specified and directed by Engineer-in-charge. Make: Bajaj/Luker/Jaqura

S&F 120 watt warm white (3000K) LED flood light luminaire die cast housing and heat sink in aluminium extrusion and IP 66 with suitable structure made by GI pipe 40 mm upto 9 mtr and MS chanel for mounting of flood light including suitable PCC foundation as per site requirement complete all as specified and directed by Engineer-in-charge. Make: Bajaj/Luker/Jaqura/Wipro/Philips/Havells

S & F PVC insulated & sheathed stranded copper conductor cable of size 2.5 Sqmm to 3 core.

S & F modular switch one way 6 Amp 1 module

M & L modular socket 6A 2/3 pin combined 2 module.

S & F high speed wall mounted fan of sweep 400 mm full copper motor auto thermal overload protection complete style and powder coated gurads & pull cord switch for speed regulation and oscillation control including connecting up the power cord to the socket and necessary fixing accessories complete all as specified and directed.

M&L point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly for following :- One 3 pin socket outlet 5 Amps on the same board

S & F 12 modular PVC surface box suitable for modular switches, sockets, fan regulator etc

S & F modular white cover plate with support frame 12 modular

S&F modular blank plates 2 modular

S&F modular blank plates 1 modular

S & F Flood light lumanaries of 50 Watt LED made in pressure die cast housing and heat sink in aluminium extrusion and IP65 protection complete , Single phase, etc fixing with suitable structure made by MS chanel and 32 mm GI pipe medium gradae (up to .90 CM) and necessary welding, using nut, bolts and washers of suitable size complete all as specified and directed by Engr-in-Charge. Make Jaquar or equivalent of wipro/Luker/Havells/Philips. Note: MS Channel & GI Pipe Structure shall be deemed in to the quoted rate

S & F smc junction box (weather proof) size of 103x103x73 for flood light poles with connector for connecting incoming and outgoing cables including provn of 01 No MCB SP 06 Amp to control the light circuit and MS brackets made out of suitable , FI clamps with suitable nut, bolts and washers including suitable size of double compression cable glands for incoming and outgoing cables. Make: Sintex Cat Part No, Model No GSJB 1111 or equivalent Model of Finolex/Hensel.

Supply and fix street light terminal boxes factory made , made out of 3.15 mm thick CRCA sheet, powder coated with hinges and door with locking arrangements of size 45cm x 30cm x 15cm housing in and including 25 x 4mm bus bar of suitable length fixed on porcelain insulator with proper size of screw and one No of MCB DP 32 Amps, 240 Volts , in/out cable gland of suitable size of cables complete fixed on suitable The panel shall be provided with 04 Nos 25mmx25mmx3mm thick angle iron supports of not less than each .6 mtr height duly painted with anti corrosive black paint and grouted in PCC 1:3:6 at suitable depth as per site requirement. Complete all as specified and directed

S & F 3 Core 4 sqmm xlpe aluminium counductor cables and including 25 mm dia heavy duty PVC conduit to be laid inderground complete all as specified and directed.

SONU ENTERPRISES

Sparkh Electricals & Works

KESARI AND SONS

Mehta and Co.