Renovation of Treasury office building at Kandaghat District Solan

Amount

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres leadThickness above 25 mm up to 40 mm as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material with in all lead as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing Sal wood work in frames of false celling partitions etc. sawn and put-up in position as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Extra for additional labour for Sal wood , circular works, such as in frames of fan light as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 2nd class teak wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

50x12 mm ( fifty into twelve) milimeter

50 x 20 mm ( fifty into twenty) milimeter

Providing and fixing with float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete (Cost of aluminium snap beading shall be paid in basic item ) as per the architectural drawings and the directions of engineer-in-charge .

Providing and fixing double action hydraulic floor spring with brass cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.

Filling the gap upto 5mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-incharge complete

Providing and fixing powder coated minimum thickness 50 micron aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. aluminium tubular handle bar .complete as per direction of Engineer-in- Charge.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

French spirit polishing two or more coats on new works including a coat of wood filler as per H.P. PWD. Spesification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing electircal installation of fancy lighat point

U V infrastructure and earthmover