Loading…
Loading…
Tender ID
Tender Value
₹2.3 L
EMD Value
₹3,000
Closing Date
3 Dec 2025, 10:05 pmClosed
Directorate of Municipal Administration
ELECTRIFICATION OF TRANSFER STATION RAJEEVAGANDHI NAGAR NEAR FILTERBED IN KALABURGI CITY (Category-ST)(Est Cost in Rs.3.48Lakhs)(SBM2)
DMA/2025-26/OW/WORK_INDENT51682
DMA/2025-26/OW/WORK_INDENT51682
Reserved
Other Works
Electronic Documents, First(One Cover)
DMA City Corporation Kalaburagi
₹500
₹3,000
24 Nov 2025
24 Nov 2025
2 Dec 2025
ELECTRIFICATION OF TRANSFER STATION RAJEEVAGANDHI NAGAR NEAR FILTERBED IN KALABURGI CITY (Category-ST)(Est Cost in Rs.3.48Lakhs)(SBM2)
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397525 25 Sqm...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130 -1984 and (Virgin) PVC insulation sheathed suitable for work...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm
HDPE/PLB Pipe 40/33 mm
Supplying and fixing regular MCB distribution boards on wall / woodboard/flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB's single phase/ 3p...
Supplying ,fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit. The pit should ...
Supplying and fixing regular MCCB distribution Panel confirming to IS / IEC 61439-3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood / panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete.Protection of ...
Supplying and fixing Electronic Trivector Meter(ETV) suitable for operation LT operation and-Ctoperated meter in polycarbonate body inclass 0.5 accuracy as per IS14697andcompletely wired.
Fabricating supplying and mounting MSbox made out.SWG suitable for floor/wall mounting, fully weatherproof with provision for better heat dissipation, provided with hinged front Cover, equipped with t...
Supplying, fixing and wiring 3Phase Digital Ammeter/Voltmeter
Supplying of Switch disconnector fuse unit(TPN) HRC type (butwithout HRC fuses). With AC-23A duty and as per IS- 13947. 63A
Supplying and fixing HRC fuse units base on existing switch /panel board.32 to 63 A
Supplying&fixingofPorcelainfusechannelwithcutoutonexisting wooden/panel using necessary nuts, bolts and washers.100 A
Supplying.Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM...
Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.
6A Three Way socket "
6A One Way Switch
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder
Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws, bolts nuts etc.,complete on the existing met...
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.
Supplyinganddrawing3coreflatPVCsheathedsubmersiblepumpcablemanufacturedwithelectrolyticgradecopperwithflexiblecopperwithlowresistanceconductorconfirmingto13:8130-1984andvirgingradePVCinsulationandpowd...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .